ibft: Fix finding IBFT ACPI table on UEFI

Found one system with UEFI/iBFT, kernel does not detect the iBFT during
iscsi_ibft module loading.

Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier
- specifically in setup_arch() before ACPI is enabled.

Try to split acpi checking code out and call that later

At that time ACPI iBFT already get permanent mapped with ioremap.
So isa_virt_to_bus() will get wrong phys from right virt address.
We could just skip that phys address printing.

For legacy one, print the found address early.

-v2: update comments and description according to Konrad.
-v3: fix problem about module use case that is found by Konrad.
-v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again..
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index c811cb107904f64377a5c77f8dad8dbb5abc1bd2..2cce44a1d7d09c4af8ad76bb13a632779542d295 100644 (file)
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -746,6 +746,37 @@ static void __exit ibft_exit(void)
        ibft_cleanup();
 }
 
+#ifdef CONFIG_ACPI
+static const struct {
+       char *sign;
+} ibft_signs[] = {
+       /*
+        * One spec says "IBFT", the other says "iBFT". We have to check
+        * for both.
+        */
+       { ACPI_SIG_IBFT },
+       { "iBFT" },
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+       int i;
+       struct acpi_table_header *table = NULL;
+
+       if (acpi_disabled)
+               return;
+
+       for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+               acpi_get_table(ibft_signs[i].sign, 0, &table);
+               ibft_addr = (struct acpi_table_ibft *)table;
+       }
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
 /*
  * ibft_init() - creates sysfs tree entries for the iBFT data.
  */
@@ -753,9 +784,16 @@ static int __init ibft_init(void)
 {
        int rc = 0;
 
+       /*
+          As on UEFI systems the setup_arch()/find_ibft_region()
+          is called before ACPI tables are parsed and it only does
+          legacy finding.
+       */
+       if (!ibft_addr)
+               acpi_find_ibft_region();
+
        if (ibft_addr) {
-               printk(KERN_INFO "iBFT detected at 0x%llx.\n",
-                      (u64)isa_virt_to_bus(ibft_addr));
+               pr_info("iBFT detected.\n");
 
                rc = ibft_check_device();
                if (rc)

diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index bfe723266fd89bb84726d88cf15c206c020ee707..4da4eb9ae92604c35349ebaeb39b4a612bac3ed6 100644 (file)
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -45,13 +45,6 @@ EXPORT_SYMBOL_GPL(ibft_addr);
 static const struct {
        char *sign;
 } ibft_signs[] = {
-#ifdef CONFIG_ACPI
-       /*
-        * One spec says "IBFT", the other says "iBFT". We have to check
-        * for both.
-        */
-       { ACPI_SIG_IBFT },
-#endif
        { "iBFT" },
        { "BIFT" },     /* Broadcom iSCSI Offload */
 };
@@ -62,14 +55,6 @@ static const struct {
 #define VGA_MEM 0xA0000 /* VGA buffer */
 #define VGA_SIZE 0x20000 /* 128kB */
 
-#ifdef CONFIG_ACPI
-static int __init acpi_find_ibft(struct acpi_table_header *header)
-{
-       ibft_addr = (struct acpi_table_ibft *)header;
-       return 0;
-}
-#endif /* CONFIG_ACPI */
-
 static int __init find_ibft_in_mem(void)
 {
        unsigned long pos;
@@ -94,6 +79,7 @@ static int __init find_ibft_in_mem(void)
                                 * the table cannot be valid. */
                                if (pos + len <= (IBFT_END-1)) {
                                        ibft_addr = (struct acpi_table_ibft *)virt;
+                                       pr_info("iBFT found at 0x%lx.\n", pos);
                                        goto done;
                                }
                        }
@@ -108,20 +94,12 @@ done:
  */
 unsigned long __init find_ibft_region(unsigned long *sizep)
 {
-#ifdef CONFIG_ACPI
-       int i;
-#endif
        ibft_addr = NULL;
 
-#ifdef CONFIG_ACPI
-       for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
-               acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
-#endif /* CONFIG_ACPI */
-
        /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
         * only use ACPI for this */
 
-       if (!ibft_addr && !efi_enabled)
+       if (!efi_enabled)
                find_ibft_in_mem();
 
        if (ibft_addr) {