V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams
authorHans de Goede <hdegoede@redhat.com>
Sat, 20 Feb 2010 07:30:45 +0000 (04:30 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 26 Feb 2010 18:11:10 +0000 (15:11 -0300)
Due to hardware limitations this only works while the camera is
streaming.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/gspca/ov519.c

index d9b89a2803df54f1787b1a477f6003b955ad1d3a..016f8bb5c3754071c08312149c858d48e2f362e7 100644 (file)
@@ -2702,6 +2702,11 @@ static void sd_reset_snapshot(struct gspca_dev *gspca_dev)
        sd->snapshot_needs_reset = 0;
 
        switch (sd->bridge) {
+       case BRIDGE_OV518:
+       case BRIDGE_OV518PLUS:
+               reg_w(sd, R51x_SYS_SNAP, 0x02); /* Reset */
+               reg_w(sd, R51x_SYS_SNAP, 0x01); /* Enable */
+               break;
        case BRIDGE_OV519:
                reg_w(sd, R51x_SYS_RESET, 0x40);
                reg_w(sd, R51x_SYS_RESET, 0x00);
@@ -3977,6 +3982,28 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
                w9968cf_stop0(sd);
 }
 
+static void ov51x_handle_button(struct gspca_dev *gspca_dev, u8 state)
+{
+       struct sd *sd = (struct sd *) gspca_dev;
+
+       if (sd->snapshot_pressed != state) {
+#ifdef CONFIG_INPUT
+               input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
+               input_sync(gspca_dev->input_dev);
+#endif
+               if (state)
+                       sd->snapshot_needs_reset = 1;
+
+               sd->snapshot_pressed = state;
+       } else {
+               /* On the ov519 we need to reset the button state multiple
+                  times, as resetting does not work as long as the button
+                  stays pressed */
+               if (sd->bridge == BRIDGE_OV519 && state)
+                       sd->snapshot_needs_reset = 1;
+       }
+}
+
 static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
                        u8 *in,                 /* isoc packet */
                        int len)                /* iso packet length */
@@ -4035,6 +4062,7 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
        /* A false positive here is likely, until OVT gives me
         * the definitive SOF/EOF format */
        if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
+               ov51x_handle_button(gspca_dev, (data[6] >> 1) & 1);
                gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
                gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
                sd->packet_nr = 0;
@@ -4063,30 +4091,6 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
        gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
 
-static void ov519_handle_button(struct gspca_dev *gspca_dev, u8 state)
-{
-       struct sd *sd = (struct sd *) gspca_dev;
-
-       /* This should never happen, but better to check */
-       if (state != 0 && state != 1)
-               return;
-
-       /* We may need to reset the button state multiple times, as resetting
-          does not work as long as the button stays pressed, so always set
-          snapshot_needs_reset (instead of only on a state change to 1). */
-       if (state)
-               sd->snapshot_needs_reset = 1;
-
-       if (sd->snapshot_pressed != state) {
-#ifdef CONFIG_INPUT
-               input_report_key(gspca_dev->input_dev, KEY_CAMERA, state);
-               input_sync(gspca_dev->input_dev);
-#endif
-
-               sd->snapshot_pressed = state;
-       }
-}
-
 static void ov519_pkt_scan(struct gspca_dev *gspca_dev,
                        u8 *data,                       /* isoc packet */
                        int len)                        /* iso packet length */
@@ -4120,7 +4124,7 @@ static void ov519_pkt_scan(struct gspca_dev *gspca_dev,
                                gspca_dev->last_packet_type = DISCARD_PACKET;
                        return;
                case 0x51:              /* end of frame */
-                       ov519_handle_button(gspca_dev, data[11]);
+                       ov51x_handle_button(gspca_dev, data[11] & 1);
                        if (data[9] != 0)
                                gspca_dev->last_packet_type = DISCARD_PACKET;
                        gspca_frame_add(gspca_dev, LAST_PACKET,