preempt_mask.h defines all the preempt_count semantics and related
symbols: preempt, softirq, hardirq, nmi, preempt active, need resched,
etc...
preempt.h defines the accessors and mutators of preempt_count.
But there is a messy dependency game around those two header files:
* preempt_mask.h includes preempt.h in order to access preempt_count()
* preempt_mask.h defines all preempt_count semantic and symbols
except PREEMPT_NEED_RESCHED that is needed by asm/preempt.h
Thus we need to define it from preempt.h, right before including
asm/preempt.h, instead of defining it to preempt_mask.h with the
other preempt_count symbols. Therefore the preempt_count semantics
happen to be spread out.
* We plan to introduce preempt_active_[enter,exit]() to consolidate
preempt_schedule*() code. But we'll need to access both preempt_count
mutators (preempt_count_add()) and preempt_count symbols
(PREEMPT_ACTIVE, PREEMPT_OFFSET). The usual place to define preempt
operations is in preempt.h but then we'll need symbols in
preempt_mask.h which already includes preempt.h. So we end up with
a ressource circle dependency.
Lets merge preempt_mask.h into preempt.h to solve these dependency issues.
This way we gather semantic symbols and operation definition of
preempt_count in a single file.
This is a dumb copy-paste merge. Further merge re-arrangments are
performed in a subsequent patch to ease review.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431441711-29753-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
#define _M68K_IRQFLAGS_H
#include <linux/types.h>
-#ifdef CONFIG_MMU
-#include <linux/preempt_mask.h>
-#endif
#include <linux/preempt.h>
#include <asm/thread_info.h>
#include <asm/entry.h>
#define _LINUX_BH_H
#include <linux/preempt.h>
-#include <linux/preempt_mask.h>
#ifdef CONFIG_TRACE_IRQFLAGS
extern void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
#ifndef LINUX_HARDIRQ_H
#define LINUX_HARDIRQ_H
-#include <linux/preempt_mask.h>
+#include <linux/preempt.h>
#include <linux/lockdep.h>
#include <linux/ftrace_irq.h>
#include <linux/vtime.h>
#include <asm/preempt.h>
+/*
+ * We put the hardirq and softirq counter into the preemption
+ * counter. The bitmask has the following meaning:
+ *
+ * - bits 0-7 are the preemption count (max preemption depth: 256)
+ * - bits 8-15 are the softirq count (max # of softirqs: 256)
+ *
+ * The hardirq count could in theory be the same as the number of
+ * interrupts in the system, but we run all interrupt handlers with
+ * interrupts disabled, so we cannot have nesting interrupts. Though
+ * there are a few palaeontologic drivers which reenable interrupts in
+ * the handler, so we need more than one bit here.
+ *
+ * PREEMPT_MASK: 0x000000ff
+ * SOFTIRQ_MASK: 0x0000ff00
+ * HARDIRQ_MASK: 0x000f0000
+ * NMI_MASK: 0x00100000
+ * PREEMPT_ACTIVE: 0x00200000
+ */
+#define PREEMPT_BITS 8
+#define SOFTIRQ_BITS 8
+#define HARDIRQ_BITS 4
+#define NMI_BITS 1
+
+#define PREEMPT_SHIFT 0
+#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
+#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS)
+#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS)
+
+#define __IRQ_MASK(x) ((1UL << (x))-1)
+
+#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
+#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
+#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
+#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT)
+
+#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
+#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
+#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
+#define NMI_OFFSET (1UL << NMI_SHIFT)
+
+#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET)
+
+#define PREEMPT_ACTIVE_BITS 1
+#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS)
+#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
+
+#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
+#define softirq_count() (preempt_count() & SOFTIRQ_MASK)
+#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
+ | NMI_MASK))
+
+/*
+ * Are we doing bottom half or hardware interrupt processing?
+ * Are we in a softirq context? Interrupt context?
+ * in_softirq - Are we currently processing softirq or have bh disabled?
+ * in_serving_softirq - Are we currently processing softirq?
+ */
+#define in_irq() (hardirq_count())
+#define in_softirq() (softirq_count())
+#define in_interrupt() (irq_count())
+#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET)
+
+/*
+ * Are we in NMI context?
+ */
+#define in_nmi() (preempt_count() & NMI_MASK)
+
+#if defined(CONFIG_PREEMPT_COUNT)
+# define PREEMPT_CHECK_OFFSET 1
+#else
+# define PREEMPT_CHECK_OFFSET 0
+#endif
+
+/*
+ * The preempt_count offset needed for things like:
+ *
+ * spin_lock_bh()
+ *
+ * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and
+ * softirqs, such that unlock sequences of:
+ *
+ * spin_unlock();
+ * local_bh_enable();
+ *
+ * Work as expected.
+ */
+#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET)
+
+/*
+ * Are we running in atomic context? WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels. Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
+#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
+
+/*
+ * Check whether we were atomic before we did preempt_disable():
+ * (used by the scheduler, *after* releasing the kernel lock)
+ */
+#define in_atomic_preempt_off() \
+ ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
+
+#ifdef CONFIG_PREEMPT_COUNT
+# define preemptible() (preempt_count() == 0 && !irqs_disabled())
+#else
+# define preemptible() 0
+#endif
+
#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
extern void preempt_count_add(int val);
extern void preempt_count_sub(int val);
+++ /dev/null
-#ifndef LINUX_PREEMPT_MASK_H
-#define LINUX_PREEMPT_MASK_H
-
-#include <linux/preempt.h>
-
-/*
- * We put the hardirq and softirq counter into the preemption
- * counter. The bitmask has the following meaning:
- *
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- *
- * The hardirq count could in theory be the same as the number of
- * interrupts in the system, but we run all interrupt handlers with
- * interrupts disabled, so we cannot have nesting interrupts. Though
- * there are a few palaeontologic drivers which reenable interrupts in
- * the handler, so we need more than one bit here.
- *
- * PREEMPT_MASK: 0x000000ff
- * SOFTIRQ_MASK: 0x0000ff00
- * HARDIRQ_MASK: 0x000f0000
- * NMI_MASK: 0x00100000
- * PREEMPT_ACTIVE: 0x00200000
- */
-#define PREEMPT_BITS 8
-#define SOFTIRQ_BITS 8
-#define HARDIRQ_BITS 4
-#define NMI_BITS 1
-
-#define PREEMPT_SHIFT 0
-#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS)
-#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS)
-#define NMI_SHIFT (HARDIRQ_SHIFT + HARDIRQ_BITS)
-
-#define __IRQ_MASK(x) ((1UL << (x))-1)
-
-#define PREEMPT_MASK (__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define SOFTIRQ_MASK (__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
-#define HARDIRQ_MASK (__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
-#define NMI_MASK (__IRQ_MASK(NMI_BITS) << NMI_SHIFT)
-
-#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT)
-#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT)
-#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT)
-#define NMI_OFFSET (1UL << NMI_SHIFT)
-
-#define SOFTIRQ_DISABLE_OFFSET (2 * SOFTIRQ_OFFSET)
-
-#define PREEMPT_ACTIVE_BITS 1
-#define PREEMPT_ACTIVE_SHIFT (NMI_SHIFT + NMI_BITS)
-#define PREEMPT_ACTIVE (__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
-
-#define hardirq_count() (preempt_count() & HARDIRQ_MASK)
-#define softirq_count() (preempt_count() & SOFTIRQ_MASK)
-#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
- | NMI_MASK))
-
-/*
- * Are we doing bottom half or hardware interrupt processing?
- * Are we in a softirq context? Interrupt context?
- * in_softirq - Are we currently processing softirq or have bh disabled?
- * in_serving_softirq - Are we currently processing softirq?
- */
-#define in_irq() (hardirq_count())
-#define in_softirq() (softirq_count())
-#define in_interrupt() (irq_count())
-#define in_serving_softirq() (softirq_count() & SOFTIRQ_OFFSET)
-
-/*
- * Are we in NMI context?
- */
-#define in_nmi() (preempt_count() & NMI_MASK)
-
-#if defined(CONFIG_PREEMPT_COUNT)
-# define PREEMPT_CHECK_OFFSET 1
-#else
-# define PREEMPT_CHECK_OFFSET 0
-#endif
-
-/*
- * The preempt_count offset needed for things like:
- *
- * spin_lock_bh()
- *
- * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and
- * softirqs, such that unlock sequences of:
- *
- * spin_unlock();
- * local_bh_enable();
- *
- * Work as expected.
- */
-#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET)
-
-/*
- * Are we running in atomic context? WARNING: this macro cannot
- * always detect atomic context; in particular, it cannot know about
- * held spinlocks in non-preemptible kernels. Thus it should not be
- * used in the general case to determine whether sleeping is possible.
- * Do not use in_atomic() in driver code.
- */
-#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
-
-/*
- * Check whether we were atomic before we did preempt_disable():
- * (used by the scheduler, *after* releasing the kernel lock)
- */
-#define in_atomic_preempt_off() \
- ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
-
-#ifdef CONFIG_PREEMPT_COUNT
-# define preemptible() (preempt_count() == 0 && !irqs_disabled())
-#else
-# define preemptible() 0
-#endif
-
-#endif /* LINUX_PREEMPT_MASK_H */
#include <linux/errno.h>
#include <linux/nodemask.h>
#include <linux/mm_types.h>
-#include <linux/preempt_mask.h>
+#include <linux/preempt.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/rcupdate.h>
-#include <linux/preempt_mask.h> /* in_interrupt() */
+#include <linux/preempt.h> /* in_interrupt() */
/*
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff