tty/serial: atmel: make the driver DT only

Now that AVR32 is gone, platform_data are not used to initialize the driver
anymore, remove that path from the driver. Also remove the now unused
struct atmel_uart_data.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b8d9f8f06b854b4890740818f5e798efed39d6a4..7551cab438ff848d767b60295cad3efc3ce353cf 100644 (file)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1638,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port,
                                struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
-       struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
-       if (np) {
-               /* DMA/PDC usage specification */
-               if (of_property_read_bool(np, "atmel,use-dma-rx")) {
-                       if (of_property_read_bool(np, "dmas")) {
-                               atmel_port->use_dma_rx  = true;
-                               atmel_port->use_pdc_rx  = false;
-                       } else {
-                               atmel_port->use_dma_rx  = false;
-                               atmel_port->use_pdc_rx  = true;
-                       }
+
+       /* DMA/PDC usage specification */
+       if (of_property_read_bool(np, "atmel,use-dma-rx")) {
+               if (of_property_read_bool(np, "dmas")) {
+                       atmel_port->use_dma_rx  = true;
+                       atmel_port->use_pdc_rx  = false;
                } else {
                        atmel_port->use_dma_rx  = false;
-                       atmel_port->use_pdc_rx  = false;
+                       atmel_port->use_pdc_rx  = true;
                }
+       } else {
+               atmel_port->use_dma_rx  = false;
+               atmel_port->use_pdc_rx  = false;
+       }
 
-               if (of_property_read_bool(np, "atmel,use-dma-tx")) {
-                       if (of_property_read_bool(np, "dmas")) {
-                               atmel_port->use_dma_tx  = true;
-                               atmel_port->use_pdc_tx  = false;
-                       } else {
-                               atmel_port->use_dma_tx  = false;
-                               atmel_port->use_pdc_tx  = true;
-                       }
+       if (of_property_read_bool(np, "atmel,use-dma-tx")) {
+               if (of_property_read_bool(np, "dmas")) {
+                       atmel_port->use_dma_tx  = true;
+                       atmel_port->use_pdc_tx  = false;
                } else {
                        atmel_port->use_dma_tx  = false;
-                       atmel_port->use_pdc_tx  = false;
+                       atmel_port->use_pdc_tx  = true;
                }
-
        } else {
-               atmel_port->use_pdc_rx  = pdata->use_dma_rx;
-               atmel_port->use_pdc_tx  = pdata->use_dma_tx;
-               atmel_port->use_dma_rx  = false;
                atmel_port->use_dma_tx  = false;
+               atmel_port->use_pdc_tx  = false;
        }
-
 }
 
 static void atmel_init_rs485(struct uart_port *port,
                                struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
-       struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
-
-       if (np) {
-               struct serial_rs485 *rs485conf = &port->rs485;
-               u32 rs485_delay[2];
-               /* rs485 properties */
-               if (of_property_read_u32_array(np, "rs485-rts-delay",
-                                       rs485_delay, 2) == 0) {
-                       rs485conf->delay_rts_before_send = rs485_delay[0];
-                       rs485conf->delay_rts_after_send = rs485_delay[1];
-                       rs485conf->flags = 0;
-               }
 
-               if (of_get_property(np, "rs485-rx-during-tx", NULL))
-                       rs485conf->flags |= SER_RS485_RX_DURING_TX;
+       struct serial_rs485 *rs485conf = &port->rs485;
+       u32 rs485_delay[2];
 
-               if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
-                                                               NULL))
-                       rs485conf->flags |= SER_RS485_ENABLED;
-       } else {
-               port->rs485       = pdata->rs485;
+       /* rs485 properties */
+       if (of_property_read_u32_array(np, "rs485-rts-delay",
+                                      rs485_delay, 2) == 0) {
+               rs485conf->delay_rts_before_send = rs485_delay[0];
+               rs485conf->delay_rts_after_send = rs485_delay[1];
+               rs485conf->flags = 0;
        }
 
+       if (of_get_property(np, "rs485-rx-during-tx", NULL))
+               rs485conf->flags |= SER_RS485_RX_DURING_TX;
+
+       if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL))
+               rs485conf->flags |= SER_RS485_ENABLED;
 }
 
 static void atmel_set_ops(struct uart_port *port)
@@ -2385,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 {
        int ret;
        struct uart_port *port = &atmel_port->uart;
-       struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
 
        atmel_init_property(atmel_port, pdev);
        atmel_set_ops(port);
@@ -2393,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
        atmel_init_rs485(port, pdev);
 
        port->iotype            = UPIO_MEM;
-       port->flags             = UPF_BOOT_AUTOCONF;
+       port->flags             = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
        port->ops               = &atmel_pops;
        port->fifosize          = 1;
        port->dev               = &pdev->dev;
        port->mapbase   = pdev->resource[0].start;
        port->irq       = pdev->resource[1].start;
        port->rs485_config      = atmel_config_rs485;
+       port->membase   = NULL;
 
        memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
 
-       if (pdata && pdata->regs) {
-               /* Already mapped by setup code */
-               port->membase = pdata->regs;
-       } else {
-               port->flags     |= UPF_IOREMAP;
-               port->membase   = NULL;
-       }
-
        /* for console, the clock could already be configured */
        if (!atmel_port->clk) {
                atmel_port->clk = clk_get(&pdev->dev, "usart");
@@ -2744,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev)
 {
        struct atmel_uart_port *atmel_port;
        struct device_node *np = pdev->dev.of_node;
-       struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
        void *data;
        int ret = -ENODEV;
        bool rs485_enabled;
 
        BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
-       if (np)
-               ret = of_alias_get_id(np, "serial");
-       else
-               if (pdata)
-                       ret = pdata->num;
-
+       ret = of_alias_get_id(np, "serial");
        if (ret < 0)
                /* port id not found in platform data nor device-tree aliases:
                 * auto-enumerate it */

diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index 3c8825b67298fafe60f22c803206f9f0789fc8f7..d36bc8d17e977684f5a1ecdaa5fcf6f0b5a3fbf5 100644 (file)
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -9,7 +9,6 @@
 
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/serial.h>
 
  /* Compact Flash */
 struct at91_cf_data {
@@ -42,15 +41,6 @@ struct atmel_nand_data {
        bool            need_reset_workaround;
 };
 
- /* Serial */
-struct atmel_uart_data {
-       int                     num;            /* port num */
-       short                   use_dma_tx;     /* use transmit DMA? */
-       short                   use_dma_rx;     /* use receive DMA? */
-       void __iomem            *regs;          /* virt. base address, if any */
-       struct serial_rs485     rs485;          /* rs485 settings */
-};
-
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);