/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-pci.c - covers the PCI part including DMA transfers.
- *
- * see flexcop.c for copyright information.
+ * Linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-pci.c - covers the PCI part including DMA transfers
+ * see flexcop.c for copyright information
*/
#define FC_LOG_PREFIX "flexcop-pci"
static int enable_pid_filtering = 1;
module_param(enable_pid_filtering, int, 0444);
-MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
+MODULE_PARM_DESC(enable_pid_filtering,
+ "enable hardware pid filtering: supported values: 0 (fullts), 1");
static int irq_chk_intv = 100;
module_param(irq_chk_intv, int, 0644);
#define DEBSTATUS " (debugging is not enabled)"
#endif
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_reg(args...) dprintk(0x02,args)
-#define deb_ts(args...) dprintk(0x04,args)
-#define deb_irq(args...) dprintk(0x08,args)
-#define deb_chk(args...) dprintk(0x10,args)
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_reg(args...) dprintk(0x02, args)
+#define deb_ts(args...) dprintk(0x04, args)
+#define deb_irq(args...) dprintk(0x08, args)
+#define deb_chk(args...) dprintk(0x10, args)
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,
"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
- DEBSTATUS);
+ DEBSTATUS);
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
void __iomem *io_mem;
u32 irq;
-/* buffersize (at least for DMA1, need to be % 188 == 0,
- * this logic is required */
+ /* buffersize (at least for DMA1, need to be % 188 == 0,
+ * this logic is required */
#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188)
#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188)
struct flexcop_dma dma[2];
int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
- u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
+ u32 last_dma1_cur_pos;
+ /* position of the pointer last time the timer/packet irq occured */
int count;
int count_prev;
int stream_problem;
spinlock_t irq_lock;
-
unsigned long last_irq;
struct delayed_work irq_check_work;
-
struct flexcop_device *fc_dev;
};
-static int lastwreg,lastwval,lastrreg,lastrval;
+static int lastwreg, lastwval, lastrreg, lastrval;
-static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r)
+static flexcop_ibi_value flexcop_pci_read_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register r)
{
struct flexcop_pci *fc_pci = fc->bus_specific;
flexcop_ibi_value v;
if (lastrreg != r || lastrval != v.raw) {
lastrreg = r; lastrval = v.raw;
- deb_reg("new rd: %3x: %08x\n",r,v.raw);
+ deb_reg("new rd: %3x: %08x\n", r, v.raw);
}
return v;
}
-static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v)
+static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register r, flexcop_ibi_value v)
{
struct flexcop_pci *fc_pci = fc->bus_specific;
if (lastwreg != r || lastwval != v.raw) {
lastwreg = r; lastwval = v.raw;
- deb_reg("new wr: %3x: %08x\n",r,v.raw);
+ deb_reg("new wr: %3x: %08x\n", r, v.raw);
}
writel(v.raw, fc_pci->io_mem + r);
spin_lock_irq(&fc->demux.lock);
list_for_each_entry(feed, &fc->demux.feed_list,
- list_head) {
+ list_head) {
flexcop_pid_feed_control(fc, feed, 0);
}
list_for_each_entry(feed, &fc->demux.feed_list,
- list_head) {
+ list_head) {
flexcop_pid_feed_control(fc, feed, 1);
}
spin_unlock_irq(&fc->demux.lock);
flexcop_ibi_value v;
irqreturn_t ret = IRQ_HANDLED;
- spin_lock_irqsave(&fc_pci->irq_lock,flags);
-
- v = fc->read_ibi_reg(fc,irq_20c);
+ spin_lock_irqsave(&fc_pci->irq_lock, flags);
+ v = fc->read_ibi_reg(fc, irq_20c);
- /* errors */
+ /* errors */
if (v.irq_20c.Data_receiver_error)
deb_chk("data receiver error\n");
if (v.irq_20c.Continuity_error_flag)
deb_chk("Transport error\n");
if ((fc_pci->count % 1000) == 0)
- deb_chk("%d valid irq took place so far\n",fc_pci->count);
+ deb_chk("%d valid irq took place so far\n", fc_pci->count);
if (v.irq_20c.DMA1_IRQ_Status == 1) {
if (fc_pci->active_dma1_addr == 0)
- flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188);
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr0,
+ fc_pci->dma[0].size / 188);
else
- flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188);
+ flexcop_pass_dmx_packets(fc_pci->fc_dev,
+ fc_pci->dma[0].cpu_addr1,
+ fc_pci->dma[0].size / 188);
deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr);
fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr;
- } else if (v.irq_20c.DMA1_Timer_Status == 1) {
/* for the timer IRQ we only can use buffer dmx feeding, because we don't have
* complete TS packets when reading from the DMA memory */
+ } else if (v.irq_20c.DMA1_Timer_Status == 1) {
dma_addr_t cur_addr =
fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
- deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
+ deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
+ "last_cur_pos: %08x ",
jiffies_to_usecs(jiffies - fc_pci->last_irq),
v.raw, (unsigned long long)cur_addr, cur_pos,
fc_pci->last_dma1_cur_pos);
* pass the data from last_cur_pos to the buffer end to the demux
*/
if (cur_pos < fc_pci->last_dma1_cur_pos) {
- deb_irq(" end was reached: passing %d bytes ",(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos);
+ deb_irq(" end was reached: passing %d bytes ",
+ (fc_pci->dma[0].size*2 - 1) -
+ fc_pci->last_dma1_cur_pos);
flexcop_pass_dmx_data(fc_pci->fc_dev,
- fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
- (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos);
+ fc_pci->dma[0].cpu_addr0 +
+ fc_pci->last_dma1_cur_pos,
+ (fc_pci->dma[0].size*2) -
+ fc_pci->last_dma1_cur_pos);
fc_pci->last_dma1_cur_pos = 0;
}
if (cur_pos > fc_pci->last_dma1_cur_pos) {
- deb_irq(" passing %d bytes ",cur_pos - fc_pci->last_dma1_cur_pos);
+ deb_irq(" passing %d bytes ",
+ cur_pos - fc_pci->last_dma1_cur_pos);
flexcop_pass_dmx_data(fc_pci->fc_dev,
- fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos,
- cur_pos - fc_pci->last_dma1_cur_pos);
+ fc_pci->dma[0].cpu_addr0 +
+ fc_pci->last_dma1_cur_pos,
+ cur_pos - fc_pci->last_dma1_cur_pos);
}
deb_irq("\n");
fc_pci->last_dma1_cur_pos = cur_pos;
fc_pci->count++;
} else {
- deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw);
+ deb_irq("isr for flexcop called, "
+ "apparently without reason (%08x)\n", v.raw);
ret = IRQ_NONE;
}
- spin_unlock_irqrestore(&fc_pci->irq_lock,flags);
-
+ spin_unlock_irqrestore(&fc_pci->irq_lock, flags);
return ret;
}
{
struct flexcop_pci *fc_pci = fc->bus_specific;
if (onoff) {
- flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1);
- flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2);
-
- flexcop_dma_config_timer(fc,FC_DMA_1,0);
-
- flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1);
+ flexcop_dma_config(fc, &fc_pci->dma[0], FC_DMA_1);
+ flexcop_dma_config(fc, &fc_pci->dma[1], FC_DMA_2);
+ flexcop_dma_config_timer(fc, FC_DMA_1, 0);
+ flexcop_dma_xfer_control(fc, FC_DMA_1,
+ FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 1);
deb_irq("DMA xfer enabled\n");
fc_pci->last_dma1_cur_pos = 0;
- flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
+ flexcop_dma_control_timer_irq(fc, FC_DMA_1, 1);
deb_irq("IRQ enabled\n");
-
fc_pci->count_prev = fc_pci->count;
-
-// fc_pci->active_dma1_addr = 0;
-// flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
-
} else {
- flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
+ flexcop_dma_control_timer_irq(fc, FC_DMA_1, 0);
deb_irq("IRQ disabled\n");
-// flexcop_dma_control_size_irq(fc,FC_DMA_1,0);
-
- flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0);
+ flexcop_dma_xfer_control(fc, FC_DMA_1,
+ FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1, 0);
deb_irq("DMA xfer disabled\n");
}
-
return 0;
}
static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci)
{
int ret;
- if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0)
+ ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[0],
+ FC_DEFAULT_DMA1_BUFSIZE);
+ if (ret != 0)
return ret;
- if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0) {
+ ret = flexcop_dma_allocate(fc_pci->pdev, &fc_pci->dma[1],
+ FC_DEFAULT_DMA2_BUFSIZE);
+ if (ret != 0) {
flexcop_dma_free(&fc_pci->dma[0]);
return ret;
}
- flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
- flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
-
+ flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_MEDIA |
+ FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1);
+ flexcop_sram_set_dest(fc_pci->fc_dev, FC_SRAM_DEST_CAO |
+ FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2);
fc_pci->init_state |= FC_PCI_DMA_INIT;
-
return ret;
}
if ((ret = pci_enable_device(fc_pci->pdev)) != 0)
return ret;
-
pci_set_master(fc_pci->pdev);
- /* enable interrupts */
- // pci_write_config_dword(pdev, 0x6c, 0x8000);
-
if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0)
goto err_pci_disable_device;
fc_pci->init_state &= ~FC_PCI_INIT;
}
-
-static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int flexcop_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct flexcop_device *fc;
struct flexcop_pci *fc_pci;
return -ENOMEM;
}
-/* general flexcop init */
+ /* general flexcop init */
fc_pci = fc->bus_specific;
fc_pci->fc_dev = fc;
fc->write_ibi_reg = flexcop_pci_write_ibi_reg;
fc->i2c_request = flexcop_i2c_request;
fc->get_mac_addr = flexcop_eeprom_check_mac_addr;
-
fc->stream_control = flexcop_pci_stream_control;
if (enable_pid_filtering)
fc->pid_filtering = enable_pid_filtering;
fc->bus_type = FC_PCI;
-
fc->dev = &pdev->dev;
fc->owner = THIS_MODULE;
-/* bus specific part */
+ /* bus specific part */
fc_pci->pdev = pdev;
if ((ret = flexcop_pci_init(fc_pci)) != 0)
goto err_kfree;
-/* init flexcop */
+ /* init flexcop */
if ((ret = flexcop_device_initialize(fc)) != 0)
goto err_pci_exit;
-/* init dma */
+ /* init dma */
if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
goto err_fc_exit;
INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
- if (irq_chk_intv > 0)
- schedule_delayed_work(&fc_pci->irq_check_work,
- msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
-
+ if (irq_chk_intv > 0)
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ?
+ 100 :
+ irq_chk_intv));
return ret;
err_fc_exit:
static struct pci_device_id flexcop_pci_tbl[] = {
{ PCI_DEVICE(0x13d0, 0x2103) },
-/* { PCI_DEVICE(0x13d0, 0x2200) }, ? */
{ },
};
/*
- * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
- *
- * flexcop-usb.c - covers the USB part.
- *
- * see flexcop.c for copyright information.
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.c - covers the USB part
+ * see flexcop.c for copyright information
*/
-
#define FC_LOG_PREFIX "flexcop_usb"
#include "flexcop-usb.h"
#include "flexcop-common.h"
/* debug */
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
- do { if ((debug & level)) { printk(args); } } while (0)
-#define debug_dump(b,l,method) {\
+ do { if ((debug & level)) printk(args); } while (0)
+
+#define debug_dump(b, l, method) do {\
int i; \
- for (i = 0; i < l; i++) method("%02x ", b[i]); \
- method("\n");\
-}
+ for (i = 0; i < l; i++) \
+ method("%02x ", b[i]); \
+ method("\n"); \
+} while (0)
#define DEBSTATUS ""
#else
-#define dprintk(level,args...)
-#define debug_dump(b,l,method)
+#define dprintk(level, args...)
+#define debug_dump(b, l, method)
#define DEBSTATUS " (debugging is not enabled)"
#endif
static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,"
+ "ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
#undef DEBSTATUS
-#define deb_info(args...) dprintk(0x01,args)
-#define deb_ts(args...) dprintk(0x02,args)
-#define deb_ctrl(args...) dprintk(0x04,args)
-#define deb_i2c(args...) dprintk(0x08,args)
-#define deb_v8(args...) dprintk(0x10,args)
+#define deb_info(args...) dprintk(0x01, args)
+#define deb_ts(args...) dprintk(0x02, args)
+#define deb_ctrl(args...) dprintk(0x04, args)
+#define deb_i2c(args...) dprintk(0x08, args)
+#define deb_v8(args...) dprintk(0x10, args)
/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
* in the IBI address, to make the V8 code simpler.
- * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used)
+ * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
* in general: 0000 0HHH 000L LL00
* IBI ADDRESS FORMAT: RHHH BLLL
*
* where R is the read(1)/write(0) bit, B is the busy bit
* and HHH and LLL are the two sets of three bits from the PCI address.
*/
-#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
-#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
+#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
+ (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
+#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
+ (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
/*
* DKT 020228
struct flexcop_usb *fc_usb = fc->bus_specific;
u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
- u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0);
+ u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
+ (read ? 0x80 : 0);
int len = usb_control_msg(fc_usb->udev,
read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
request,
- request_type, /* 0xc0 read or 0x40 write*/
+ request_type, /* 0xc0 read or 0x40 write */
wAddress,
0,
val,
B2C2_WAIT_FOR_OPERATION_RDW * HZ);
if (len != sizeof(u32)) {
- err("error while %s dword from %d (%d).",read ? "reading" : "writing",
- wAddress,wRegOffsPCI);
+ err("error while %s dword from %d (%d).", read ? "reading" :
+ "writing", wAddress, wRegOffsPCI);
return -EIO;
}
return 0;
}
-
/*
* DKT 010817 - add support for V8 memory read/write and flash update
*/
static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
flexcop_usb_request_t req, u8 page, u16 wAddress,
- u8 *pbBuffer,u32 buflen)
+ u8 *pbBuffer, u32 buflen)
{
-// u8 dwRequestType;
u8 request_type = USB_TYPE_VENDOR;
u16 wIndex;
- int nWaitTime,pipe,len;
-
+ int nWaitTime, pipe, len;
wIndex = page << 8;
switch (req) {
- case B2C2_USB_READ_V8_MEM:
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
- request_type |= USB_DIR_IN;
-// dwRequestType = (u8) RTYPE_READ_V8_MEMORY;
- pipe = B2C2_USB_CTRL_PIPE_IN;
+ case B2C2_USB_READ_V8_MEM:
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
+ request_type |= USB_DIR_IN;
+ pipe = B2C2_USB_CTRL_PIPE_IN;
break;
- case B2C2_USB_WRITE_V8_MEM:
- wIndex |= pbBuffer[0];
- request_type |= USB_DIR_OUT;
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
-// dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY;
- pipe = B2C2_USB_CTRL_PIPE_OUT;
+ case B2C2_USB_WRITE_V8_MEM:
+ wIndex |= pbBuffer[0];
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
- case B2C2_USB_FLASH_BLOCK:
- request_type |= USB_DIR_OUT;
- nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
-// dwRequestType = (u8) RTYPE_WRITE_V8_FLASH;
- pipe = B2C2_USB_CTRL_PIPE_OUT;
+ case B2C2_USB_FLASH_BLOCK:
+ request_type |= USB_DIR_OUT;
+ nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
break;
- default:
- deb_info("unsupported request for v8_mem_req %x.\n",req);
+ default:
+ deb_info("unsupported request for v8_mem_req %x.\n", req);
return -EINVAL;
}
- deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req,
- wAddress,wIndex,buflen);
+ deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
+ wAddress, wIndex, buflen);
- len = usb_control_msg(fc_usb->udev,pipe,
+ len = usb_control_msg(fc_usb->udev, pipe,
req,
request_type,
wAddress,
buflen,
nWaitTime * HZ);
- debug_dump(pbBuffer,len,deb_v8);
-
+ debug_dump(pbBuffer, len, deb_v8);
return len == buflen ? 0 : -EIO;
}
#define bytes_left_to_read_on_page(paddr,buflen) \
- ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
- ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
+ ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
+ ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
-static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req,
- flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len)
+static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
+ flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
+ u32 addr, int extended, u8 *buf, u32 len)
{
int i,ret = 0;
u16 wMax;
u32 pagechunk = 0;
switch(req) {
- case B2C2_USB_READ_V8_MEM: wMax = USB_MEM_READ_MAX; break;
- case B2C2_USB_WRITE_V8_MEM: wMax = USB_MEM_WRITE_MAX; break;
- case B2C2_USB_FLASH_BLOCK: wMax = USB_FLASH_MAX; break;
- default:
- return -EINVAL;
+ case B2C2_USB_READ_V8_MEM:
+ wMax = USB_MEM_READ_MAX;
+ break;
+ case B2C2_USB_WRITE_V8_MEM:
+ wMax = USB_MEM_WRITE_MAX;
+ break;
+ case B2C2_USB_FLASH_BLOCK:
+ wMax = USB_FLASH_MAX;
+ break;
+ default:
+ return -EINVAL;
break;
}
for (i = 0; i < len;) {
- pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len);
- deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended));
- if ((ret = flexcop_usb_v8_memory_req(fc_usb,req,
- page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */
- (addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended),
- &buf[i],pagechunk)) < 0)
+ pagechunk =
+ wMax < bytes_left_to_read_on_page(addr, len) ?
+ wMax :
+ bytes_left_to_read_on_page(addr, len);
+ deb_info("%x\n",
+ (addr & V8_MEMORY_PAGE_MASK) |
+ (V8_MEMORY_EXTENDED*extended));
+
+ ret = flexcop_usb_v8_memory_req(fc_usb, req,
+ page_start + (addr / V8_MEMORY_PAGE_SIZE),
+ (addr & V8_MEMORY_PAGE_MASK) |
+ (V8_MEMORY_EXTENDED*extended),
+ &buf[i], pagechunk);
+
+ if (ret < 0)
return ret;
-
addr += pagechunk;
len -= pagechunk;
}
static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
{
- return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM,
- V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->dvb_adapter.proposed_mac,6);
+ return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
+ V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
+ fc->dvb_adapter.proposed_mac, 6);
}
#if 0
{
u16 wValue;
u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
-// u8 dwRequestType = (u8) RTYPE_GENERIC,
int nWaitTime = 2,
- pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN,
- len;
-
+ pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
wValue = (func << 8) | extra;
len = usb_control_msg(fc_usb->udev,pipe,
struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
u16 wValue, wIndex;
int nWaitTime,pipe,len;
-// u8 dwRequestType;
u8 request_type = USB_TYPE_VENDOR;
switch (func) {
- case USB_FUNC_I2C_WRITE:
- case USB_FUNC_I2C_MULTIWRITE:
- case USB_FUNC_I2C_REPEATWRITE:
+ case USB_FUNC_I2C_WRITE:
+ case USB_FUNC_I2C_MULTIWRITE:
+ case USB_FUNC_I2C_REPEATWRITE:
/* DKT 020208 - add this to support special case of DiSEqC */
- case USB_FUNC_I2C_CHECKWRITE:
- pipe = B2C2_USB_CTRL_PIPE_OUT;
- nWaitTime = 2;
-// dwRequestType = (u8) RTYPE_GENERIC;
- request_type |= USB_DIR_OUT;
+ case USB_FUNC_I2C_CHECKWRITE:
+ pipe = B2C2_USB_CTRL_PIPE_OUT;
+ nWaitTime = 2;
+ request_type |= USB_DIR_OUT;
break;
- case USB_FUNC_I2C_READ:
- case USB_FUNC_I2C_REPEATREAD:
- pipe = B2C2_USB_CTRL_PIPE_IN;
- nWaitTime = 2;
-// dwRequestType = (u8) RTYPE_GENERIC;
- request_type |= USB_DIR_IN;
+ case USB_FUNC_I2C_READ:
+ case USB_FUNC_I2C_REPEATREAD:
+ pipe = B2C2_USB_CTRL_PIPE_IN;
+ nWaitTime = 2;
+ request_type |= USB_DIR_IN;
break;
- default:
- deb_info("unsupported function for i2c_req %x\n",func);
- return -EINVAL;
+ default:
+ deb_info("unsupported function for i2c_req %x\n", func);
+ return -EINVAL;
}
wValue = (func << 8) | (i2c->port << 4);
wIndex = (chipaddr << 8 ) | addr;
- deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
- wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8);
+ deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
+ func, request_type, req,
+ wValue & 0xff, wValue >> 8,
+ wIndex & 0xff, wIndex >> 8);
len = usb_control_msg(fc_usb->udev,pipe,
req,
buf,
buflen,
nWaitTime * HZ);
-
return len == buflen ? 0 : -EREMOTEIO;
}
-/* actual bus specific access functions, make sure prototype are/will be equal to pci */
-static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg)
+/* actual bus specific access functions,
+ make sure prototype are/will be equal to pci */
+static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg)
{
flexcop_ibi_value val;
val.raw = 0;
- flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1);
+ flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
return val;
}
-static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val)
+static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
+ flexcop_ibi_register reg, flexcop_ibi_value val)
{
- return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0);
+ return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
}
static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
- flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
+ flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
{
if (op == FC_READ)
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
- USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
+ USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
else
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
- USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
+ USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
}
-static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length)
+static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
+ u8 *buffer, int buffer_length)
{
u8 *b;
int l;
- deb_ts("tmp_buffer_length=%d, buffer_length=%d\n", fc_usb->tmp_buffer_length, buffer_length);
+ deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
+ fc_usb->tmp_buffer_length, buffer_length);
if (fc_usb->tmp_buffer_length > 0) {
- memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer, buffer_length);
+ memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
+ buffer_length);
fc_usb->tmp_buffer_length += buffer_length;
b = fc_usb->tmp_buffer;
l = fc_usb->tmp_buffer_length;
}
while (l >= 190) {
- if (*b == 0xff)
+ if (*b == 0xff) {
switch (*(b+1) & 0x03) {
- case 0x01: /* media packet */
- if ( *(b+2) == 0x47 )
- flexcop_pass_dmx_packets(fc_usb->fc_dev, b+2, 1);
- else
- deb_ts("not ts packet %02x %02x %02x %02x \n", *(b+2), *(b+3), *(b+4), *(b+5) );
-
- b += 190;
- l -= 190;
+ case 0x01: /* media packet */
+ if (*(b+2) == 0x47)
+ flexcop_pass_dmx_packets(
+ fc_usb->fc_dev, b+2, 1);
+ else
+ deb_ts(
+ "not ts packet %02x %02x %02x %02x \n",
+ *(b+2), *(b+3),
+ *(b+4), *(b+5));
+ b += 190;
+ l -= 190;
break;
- default:
- deb_ts("wrong packet type\n");
- l = 0;
+ default:
+ deb_ts("wrong packet type\n");
+ l = 0;
break;
}
- else {
+ } else {
deb_ts("wrong header\n");
l = 0;
}
int i;
if (urb->actual_length > 0)
- deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length);
+ deb_ts("urb completed, bufsize: %d actlen; %d\n",
+ urb->transfer_buffer_length, urb->actual_length);
for (i = 0; i < urb->number_of_packets; i++) {
if (urb->iso_frame_desc[i].status < 0) {
- err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status);
+ err("iso frame descriptor %d has an error: %d\n", i,
+ urb->iso_frame_desc[i].status);
} else
if (urb->iso_frame_desc[i].actual_length > 0) {
- deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length);
+ deb_ts("passed %d bytes to the demux\n",
+ urb->iso_frame_desc[i].actual_length);
flexcop_usb_process_frame(fc_usb,
- urb->transfer_buffer + urb->iso_frame_desc[i].offset,
+ urb->transfer_buffer +
+ urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
- }
+ }
urb->iso_frame_desc[i].status = 0;
urb->iso_frame_desc[i].actual_length = 0;
}
-
usb_submit_urb(urb,GFP_ATOMIC);
}
}
if (fc_usb->iso_buffer != NULL)
- pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr);
+ pci_free_consistent(NULL,
+ fc_usb->buffer_size, fc_usb->iso_buffer,
+ fc_usb->dma_addr);
}
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
- u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
- int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
+ u16 frame_size = le16_to_cpu(
+ fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
+ int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
+ frame_size, i, j, ret;
int buffer_offset = 0;
- deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
- B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize);
+ deb_ts("creating %d iso-urbs with %d frames "
+ "each of %d bytes size = %d.\n", B2C2_USB_NUM_ISO_URB,
+ B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
- fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr);
+ fc_usb->iso_buffer = pci_alloc_consistent(NULL,
+ bufsize, &fc_usb->dma_addr);
if (fc_usb->iso_buffer == NULL)
return -ENOMEM;
+
memset(fc_usb->iso_buffer, 0, bufsize);
fc_usb->buffer_size = bufsize;
/* creating iso urbs */
- for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
- if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) {
+ for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
+ fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
+ GFP_ATOMIC);
+ if (fc_usb->iso_urb[i] == NULL) {
ret = -ENOMEM;
goto urb_error;
}
+ }
+
/* initialising and submitting iso urbs */
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
int frame_offset = 0;
struct urb *urb = fc_usb->iso_urb[i];
- deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset);
+ deb_ts("initializing and submitting urb no. %d "
+ "(buf_offset: %d).\n", i, buffer_offset);
urb->dev = fc_usb->udev;
urb->context = fc_usb;
buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
- deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset);
+ deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
+ i, j, frame_offset);
urb->iso_frame_desc[j].offset = frame_offset;
urb->iso_frame_desc[j].length = frame_size;
frame_offset += frame_size;
}
if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
- err("submitting urb %d failed with %d.",i,ret);
+ err("submitting urb %d failed with %d.", i, ret);
goto urb_error;
}
deb_ts("submitted urb no. %d.\n",i);
}
-/* SRAM */
-
- flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET |
- FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB);
- flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS);
- flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1);
-
+ /* SRAM */
+ flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
+ FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
+ FC_SRAM_DEST_TARGET_WAN_USB);
+ flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
+ flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
return 0;
urb_error:
/* use the alternate setting with the larges buffer */
usb_set_interface(fc_usb->udev,0,1);
switch (fc_usb->udev->speed) {
- case USB_SPEED_LOW:
- err("cannot handle USB speed because it is to sLOW.");
- return -ENODEV;
- break;
- case USB_SPEED_FULL:
- info("running at FULL speed.");
- break;
- case USB_SPEED_HIGH:
- info("running at HIGH speed.");
- break;
- case USB_SPEED_UNKNOWN: /* fall through */
- default:
- err("cannot handle USB speed because it is unkown.");
- return -ENODEV;
+ case USB_SPEED_LOW:
+ err("cannot handle USB speed because it is too slow.");
+ return -ENODEV;
+ break;
+ case USB_SPEED_FULL:
+ info("running at FULL speed.");
+ break;
+ case USB_SPEED_HIGH:
+ info("running at HIGH speed.");
+ break;
+ case USB_SPEED_UNKNOWN: /* fall through */
+ default:
+ err("cannot handle USB speed because it is unknown.");
+ return -ENODEV;
}
usb_set_intfdata(fc_usb->uintf, fc_usb);
return 0;
return -ENOMEM;
}
-/* general flexcop init */
+ /* general flexcop init */
fc_usb = fc->bus_specific;
fc_usb->fc_dev = fc;
fc->dev = &udev->dev;
fc->owner = THIS_MODULE;
-/* bus specific part */
+ /* bus specific part */
fc_usb->udev = udev;
fc_usb->uintf = intf;
if ((ret = flexcop_usb_init(fc_usb)) != 0)
goto err_kfree;
-/* init flexcop */
+ /* init flexcop */
if ((ret = flexcop_device_initialize(fc)) != 0)
goto err_usb_exit;
-/* xfer init */
+ /* xfer init */
if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
goto err_fc_exit;
- info("%s successfully initialized and connected.",DRIVER_NAME);
+ info("%s successfully initialized and connected.", DRIVER_NAME);
return 0;
err_fc_exit:
flexcop_device_exit(fc_usb->fc_dev);
flexcop_usb_exit(fc_usb);
flexcop_device_kfree(fc_usb->fc_dev);
- info("%s successfully deinitialized and disconnected.",DRIVER_NAME);
+ info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
}
static struct usb_device_id flexcop_usb_table [] = {
- { USB_DEVICE(0x0af7, 0x0101) },
- { }
+ { USB_DEVICE(0x0af7, 0x0101) },
+ { }
};
MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
{
int result;
if ((result = usb_register(&flexcop_usb_driver))) {
- err("usb_register failed. (%d)",result);
+ err("usb_register failed. (%d)", result);
return result;
}
-
return 0;
}
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff