iio: pressure: st_pressure: inline per-sensor data

We have #defines for all the individual sensor registers and
value/mask pairs #defined at the top of the file and used at
exactly one spot.

This is usually good if the #defines give a meaning to the
opaque magic numbers.

However in this case, the semantic meaning is inherent in the
name of the C99-addressable fields, and that means duplication
of information, and only makes the code hard to maintain since
you every time have to add a new #define AND update the site
where it is to be used.

Get rid of the #defines and just open code the values into the
appropriate struct elements. Make sure to explicitly address
the .hz and .value fields in the st_sensor_odr_avl struct
so that the meaning of all values is clear.

This patch is purely syntactic should have no semantic effect.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 55df9a75eb3a28c5786c963a5df1b7f52bf6dd65..e19e0787864cf436f2db208e5462f13c31a4cd2f 100644 (file)
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -112,115 +112,24 @@
 #define ST_PRESS_1_OUT_XL_ADDR                 0x28
 #define ST_TEMP_1_OUT_L_ADDR                   0x2b
 
-/*
- * CUSTOM VALUES FOR LPS331AP SENSOR
- * See LPS331AP datasheet:
- * http://www2.st.com/resource/en/datasheet/lps331ap.pdf
- */
-#define ST_PRESS_LPS331AP_WAI_EXP              0xbb
-#define ST_PRESS_LPS331AP_ODR_ADDR             0x20
-#define ST_PRESS_LPS331AP_ODR_MASK             0x70
-#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL      0x01
-#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL      0x05
-#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL     0x06
-#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL     0x07
-#define ST_PRESS_LPS331AP_PW_ADDR              0x20
-#define ST_PRESS_LPS331AP_PW_MASK              0x80
-#define ST_PRESS_LPS331AP_FS_ADDR              0x23
-#define ST_PRESS_LPS331AP_FS_MASK              0x30
-#define ST_PRESS_LPS331AP_BDU_ADDR             0x20
-#define ST_PRESS_LPS331AP_BDU_MASK             0x04
-#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR                0x22
-#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK   0x04
-#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK   0x20
-#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR         0x22
-#define ST_PRESS_LPS331AP_IHL_IRQ_MASK         0x80
-#define ST_PRESS_LPS331AP_OD_IRQ_ADDR          0x22
-#define ST_PRESS_LPS331AP_OD_IRQ_MASK          0x40
-#define ST_PRESS_LPS331AP_MULTIREAD_BIT                true
-
-/*
- * CUSTOM VALUES FOR THE OBSOLETE LPS001WP SENSOR
- */
-
 /* LPS001WP pressure resolution */
 #define ST_PRESS_LPS001WP_LSB_PER_MBAR         16UL
 /* LPS001WP temperature resolution */
 #define ST_PRESS_LPS001WP_LSB_PER_CELSIUS      64UL
-
-#define ST_PRESS_LPS001WP_WAI_EXP              0xba
-#define ST_PRESS_LPS001WP_ODR_ADDR             0x20
-#define ST_PRESS_LPS001WP_ODR_MASK             0x30
-#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL      0x01
-#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL      0x02
-#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL     0x03
-#define ST_PRESS_LPS001WP_PW_ADDR              0x20
-#define ST_PRESS_LPS001WP_PW_MASK              0x40
+/* LPS001WP pressure gain */
 #define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \
        (100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR)
-#define ST_PRESS_LPS001WP_BDU_ADDR             0x20
-#define ST_PRESS_LPS001WP_BDU_MASK             0x04
-#define ST_PRESS_LPS001WP_MULTIREAD_BIT                true
+/* LPS001WP pressure and temp L addresses */
 #define ST_PRESS_LPS001WP_OUT_L_ADDR           0x28
 #define ST_TEMP_LPS001WP_OUT_L_ADDR            0x2a
 
-/*
- * CUSTOM VALUES FOR LPS25H SENSOR
- * See LPS25H datasheet:
- * http://www2.st.com/resource/en/datasheet/lps25h.pdf
- */
-#define ST_PRESS_LPS25H_WAI_EXP                        0xbd
-#define ST_PRESS_LPS25H_ODR_ADDR               0x20
-#define ST_PRESS_LPS25H_ODR_MASK               0x70
-#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL                0x01
-#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL                0x02
-#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL       0x03
-#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL       0x04
-#define ST_PRESS_LPS25H_PW_ADDR                        0x20
-#define ST_PRESS_LPS25H_PW_MASK                        0x80
-#define ST_PRESS_LPS25H_BDU_ADDR               0x20
-#define ST_PRESS_LPS25H_BDU_MASK               0x04
-#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR          0x23
-#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK     0x01
-#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK     0x10
-#define ST_PRESS_LPS25H_IHL_IRQ_ADDR           0x22
-#define ST_PRESS_LPS25H_IHL_IRQ_MASK           0x80
-#define ST_PRESS_LPS25H_OD_IRQ_ADDR            0x22
-#define ST_PRESS_LPS25H_OD_IRQ_MASK            0x40
-#define ST_PRESS_LPS25H_MULTIREAD_BIT          true
+/* LPS25H pressure and temp L addresses */
 #define ST_PRESS_LPS25H_OUT_XL_ADDR            0x28
 #define ST_TEMP_LPS25H_OUT_L_ADDR              0x2b
 
-/*
- * CUSTOM VALUES FOR LPS22HB SENSOR
- * See LPS22HB datasheet:
- * http://www2.st.com/resource/en/datasheet/lps22hb.pdf
- */
-
 /* LPS22HB temperature sensitivity */
 #define ST_PRESS_LPS22HB_LSB_PER_CELSIUS       100UL
 
-#define ST_PRESS_LPS22HB_WAI_EXP               0xb1
-#define ST_PRESS_LPS22HB_ODR_ADDR              0x10
-#define ST_PRESS_LPS22HB_ODR_MASK              0x70
-#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL       0x01
-#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL      0x02
-#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL      0x03
-#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL      0x04
-#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL      0x05
-#define ST_PRESS_LPS22HB_PW_ADDR               0x10
-#define ST_PRESS_LPS22HB_PW_MASK               0x70
-#define ST_PRESS_LPS22HB_BDU_ADDR              0x10
-#define ST_PRESS_LPS22HB_BDU_MASK              0x02
-#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR         0x12
-#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK    0x04
-#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK    0x08
-#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR          0x12
-#define ST_PRESS_LPS22HB_IHL_IRQ_MASK          0x80
-#define ST_PRESS_LPS22HB_OD_IRQ_ADDR           0x12
-#define ST_PRESS_LPS22HB_OD_IRQ_MASK           0x40
-#define ST_PRESS_LPS22HB_MULTIREAD_BIT         true
-
 static const struct iio_chan_spec st_press_1_channels[] = {
        {
                .type = IIO_PRESSURE,
@@ -321,7 +230,12 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = {
 
 static const struct st_sensor_settings st_press_sensors_settings[] = {
        {
-               .wai = ST_PRESS_LPS331AP_WAI_EXP,
+               /*
+                * CUSTOM VALUES FOR LPS331AP SENSOR
+                * See LPS331AP datasheet:
+                * http://www2.st.com/resource/en/datasheet/lps331ap.pdf
+                */
+               .wai = 0xbb,
                .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
                .sensors_supported = {
                        [0] = LPS331AP_PRESS_DEV_NAME,
@@ -329,24 +243,24 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                .ch = (struct iio_chan_spec *)st_press_1_channels,
                .num_ch = ARRAY_SIZE(st_press_1_channels),
                .odr = {
-                       .addr = ST_PRESS_LPS331AP_ODR_ADDR,
-                       .mask = ST_PRESS_LPS331AP_ODR_MASK,
+                       .addr = 0x20,
+                       .mask = 0x70,
                        .odr_avl = {
-                               { 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
-                               { 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
-                               { 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
-                               { 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
+                               { .hz = 1, .value = 0x01 },
+                               { .hz = 7, .value = 0x05 },
+                               { .hz = 13, .value = 0x06 },
+                               { .hz = 25, .value = 0x07 },
                        },
                },
                .pw = {
-                       .addr = ST_PRESS_LPS331AP_PW_ADDR,
-                       .mask = ST_PRESS_LPS331AP_PW_MASK,
+                       .addr = 0x20,
+                       .mask = 0x80,
                        .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
                        .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
                },
                .fs = {
-                       .addr = ST_PRESS_LPS331AP_FS_ADDR,
-                       .mask = ST_PRESS_LPS331AP_FS_MASK,
+                       .addr = 0x23,
+                       .mask = 0x30,
                        .fs_avl = {
                                /*
                                 * Pressure and temperature sensitivity values
@@ -360,24 +274,27 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        },
                },
                .bdu = {
-                       .addr = ST_PRESS_LPS331AP_BDU_ADDR,
-                       .mask = ST_PRESS_LPS331AP_BDU_MASK,
+                       .addr = 0x20,
+                       .mask = 0x04,
                },
                .drdy_irq = {
-                       .addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
-                       .mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
-                       .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
-                       .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
-                       .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
-                       .addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
-                       .mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
+                       .addr = 0x22,
+                       .mask_int1 = 0x04,
+                       .mask_int2 = 0x20,
+                       .addr_ihl = 0x22,
+                       .mask_ihl = 0x80,
+                       .addr_od = 0x22,
+                       .mask_od = 0x40,
                        .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
                },
-               .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
+               .multi_read_bit = true,
                .bootime = 2,
        },
        {
-               .wai = ST_PRESS_LPS001WP_WAI_EXP,
+               /*
+                * CUSTOM VALUES FOR LPS001WP SENSOR
+                */
+               .wai = 0xba,
                .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
                .sensors_supported = {
                        [0] = LPS001WP_PRESS_DEV_NAME,
@@ -385,17 +302,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                .ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
                .num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
                .odr = {
-                       .addr = ST_PRESS_LPS001WP_ODR_ADDR,
-                       .mask = ST_PRESS_LPS001WP_ODR_MASK,
+                       .addr = 0x20,
+                       .mask = 0x30,
                        .odr_avl = {
-                               { 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
-                               { 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
-                               { 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
+                               { .hz = 1, .value = 0x01 },
+                               { .hz = 7, .value = 0x02 },
+                               { .hz = 13, .value = 0x03 },
                        },
                },
                .pw = {
-                       .addr = ST_PRESS_LPS001WP_PW_ADDR,
-                       .mask = ST_PRESS_LPS001WP_PW_MASK,
+                       .addr = 0x20,
+                       .mask = 0x40,
                        .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
                        .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
                },
@@ -413,17 +330,22 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        },
                },
                .bdu = {
-                       .addr = ST_PRESS_LPS001WP_BDU_ADDR,
-                       .mask = ST_PRESS_LPS001WP_BDU_MASK,
+                       .addr = 0x20,
+                       .mask = 0x04,
                },
                .drdy_irq = {
                        .addr = 0,
                },
-               .multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
+               .multi_read_bit = true,
                .bootime = 2,
        },
        {
-               .wai = ST_PRESS_LPS25H_WAI_EXP,
+               /*
+                * CUSTOM VALUES FOR LPS25H SENSOR
+                * See LPS25H datasheet:
+                * http://www2.st.com/resource/en/datasheet/lps25h.pdf
+                */
+               .wai = 0xbd,
                .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
                .sensors_supported = {
                        [0] = LPS25H_PRESS_DEV_NAME,
@@ -431,18 +353,18 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                .ch = (struct iio_chan_spec *)st_press_1_channels,
                .num_ch = ARRAY_SIZE(st_press_1_channels),
                .odr = {
-                       .addr = ST_PRESS_LPS25H_ODR_ADDR,
-                       .mask = ST_PRESS_LPS25H_ODR_MASK,
+                       .addr = 0x20,
+                       .mask = 0x70,
                        .odr_avl = {
-                               { 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, },
-                               { 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, },
-                               { 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, },
-                               { 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, },
+                               { .hz = 1, .value = 0x01 },
+                               { .hz = 7, .value = 0x02 },
+                               { .hz = 13, .value = 0x03 },
+                               { .hz = 25, .value = 0x04 },
                        },
                },
                .pw = {
-                       .addr = ST_PRESS_LPS25H_PW_ADDR,
-                       .mask = ST_PRESS_LPS25H_PW_MASK,
+                       .addr = 0x20,
+                       .mask = 0x80,
                        .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
                        .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
                },
@@ -460,24 +382,29 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        },
                },
                .bdu = {
-                       .addr = ST_PRESS_LPS25H_BDU_ADDR,
-                       .mask = ST_PRESS_LPS25H_BDU_MASK,
+                       .addr = 0x20,
+                       .mask = 0x04,
                },
                .drdy_irq = {
-                       .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
-                       .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
-                       .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
-                       .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
-                       .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
-                       .addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
-                       .mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
+                       .addr = 0x23,
+                       .mask_int1 = 0x01,
+                       .mask_int2 = 0x10,
+                       .addr_ihl = 0x22,
+                       .mask_ihl = 0x80,
+                       .addr_od = 0x22,
+                       .mask_od = 0x40,
                        .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
                },
-               .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
+               .multi_read_bit = true,
                .bootime = 2,
        },
        {
-               .wai = ST_PRESS_LPS22HB_WAI_EXP,
+               /*
+                * CUSTOM VALUES FOR LPS22HB SENSOR
+                * See LPS22HB datasheet:
+                * http://www2.st.com/resource/en/datasheet/lps22hb.pdf
+                */
+               .wai = 0xb1,
                .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
                .sensors_supported = {
                        [0] = LPS22HB_PRESS_DEV_NAME,
@@ -485,19 +412,19 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                .ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
                .num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
                .odr = {
-                       .addr = ST_PRESS_LPS22HB_ODR_ADDR,
-                       .mask = ST_PRESS_LPS22HB_ODR_MASK,
+                       .addr = 0x10,
+                       .mask = 0x70,
                        .odr_avl = {
-                               { 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, },
-                               { 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, },
-                               { 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, },
-                               { 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, },
-                               { 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, },
+                               { .hz = 1, .value = 0x01 },
+                               { .hz = 10, .value = 0x02 },
+                               { .hz = 25, .value = 0x03 },
+                               { .hz = 50, .value = 0x04 },
+                               { .hz = 75, .value = 0x05 },
                        },
                },
                .pw = {
-                       .addr = ST_PRESS_LPS22HB_PW_ADDR,
-                       .mask = ST_PRESS_LPS22HB_PW_MASK,
+                       .addr = 0x10,
+                       .mask = 0x70,
                        .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
                },
                .fs = {
@@ -514,20 +441,20 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
                        },
                },
                .bdu = {
-                       .addr = ST_PRESS_LPS22HB_BDU_ADDR,
-                       .mask = ST_PRESS_LPS22HB_BDU_MASK,
+                       .addr = 0x10,
+                       .mask = 0x02,
                },
                .drdy_irq = {
-                       .addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR,
-                       .mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK,
-                       .mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK,
-                       .addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR,
-                       .mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK,
-                       .addr_od = ST_PRESS_LPS22HB_OD_IRQ_ADDR,
-                       .mask_od = ST_PRESS_LPS22HB_OD_IRQ_MASK,
+                       .addr = 0x12,
+                       .mask_int1 = 0x04,
+                       .mask_int2 = 0x08,
+                       .addr_ihl = 0x12,
+                       .mask_ihl = 0x80,
+                       .addr_od = 0x12,
+                       .mask_od = 0x40,
                        .addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
                },
-               .multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT,
+               .multi_read_bit = true,
        },
 };