The musb driver calls into this phy driver to disable/enable squelch
detection. This function was introduced in
24fe86a617c5 ("phy: sun4i-usb:
Add a sunxi specific function for setting squelch-detect"). This
function in turn calls sun4i_usb_phy_write, which uses a mutex to
guard the common access register. Unfortunately musb does this
in atomic context, which results in the following warning with lock
debugging enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97
in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: kworker/0:2
CPU: 0 PID: 96 Comm: kworker/0:2 Not tainted
4.8.0-rc4-00181-gd502f8ad1c3e #13
Hardware name: Allwinner sun8i Family
Workqueue: events musb_deassert_reset
[<
c010bc01>] (unwind_backtrace) from [<
c0109237>] (show_stack+0xb/0xc)
[<
c0109237>] (show_stack) from [<
c02a669b>] (dump_stack+0x67/0x74)
[<
c02a669b>] (dump_stack) from [<
c05d68c9>] (mutex_lock+0x15/0x2c)
[<
c05d68c9>] (mutex_lock) from [<
c02c3589>] (sun4i_usb_phy_write+0x39/0xec)
[<
c02c3589>] (sun4i_usb_phy_write) from [<
c03e6327>] (musb_port_reset+0xfb/0x184)
[<
c03e6327>] (musb_port_reset) from [<
c03e4917>] (musb_deassert_reset+0x1f/0x2c)
[<
c03e4917>] (musb_deassert_reset) from [<
c012ecb5>] (process_one_work+0x129/0x2b8)
[<
c012ecb5>] (process_one_work) from [<
c012f5e3>] (worker_thread+0xf3/0x424)
[<
c012f5e3>] (worker_thread) from [<
c0132dbd>] (kthread+0xa1/0xb8)
[<
c0132dbd>] (kthread) from [<
c0105f31>] (ret_from_fork+0x11/0x20)
Since the register access is mmio, we can use a spinlock to guard this
specific access, rather than the mutex that guards the entire phy.
Fixes:
ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/spinlock.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
enum usb_dr_mode dr_mode;
- struct mutex mutex;
+ spinlock_t reg_lock; /* guard access to phyctl reg */
struct sun4i_usb_phy {
struct phy *phy;
void __iomem *pmu;
struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
u32 temp, usbc_bit = BIT(phy->index * 2);
void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+ unsigned long flags;
int i;
- mutex_lock(&phy_data->mutex);
+ spin_lock_irqsave(&phy_data->reg_lock, flags);
if (phy_data->cfg->type == sun8i_a33_phy ||
phy_data->cfg->type == sun50i_a64_phy) {
data >>= 1;
}
- mutex_unlock(&phy_data->mutex);
+
+ spin_unlock_irqrestore(&phy_data->reg_lock, flags);
}
static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
if (!data)
return -ENOMEM;
- mutex_init(&data->mutex);
+ spin_lock_init(&data->reg_lock);
INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
dev_set_drvdata(dev, data);
data->cfg = of_device_get_match_data(dev);