cpufreq: dbx500: Delete obsolete driver

We have moved the Ux500 over to use the generic DT based
cpufreq driver, so delete the old custom driver.

At the same time select CPUFREQ_DT from the machine's
Kconfig in order to satisfy the "default ARCH_U8500"
selection on the old driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 4740ac393297c228a8eb7b9afe77243bc62f573a..2b56e4af5a27a40fc79e6b95df1efa04a48d2e61 100644 (file)
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -9,6 +9,7 @@ menuconfig ARCH_U8500
        select ARM_GIC
        select CACHE_L2X0
        select CLKSRC_NOMADIK_MTU
+       select CPUFREQ_DT
        select GPIOLIB
        select HAVE_ARM_SCU if SMP
        select HAVE_ARM_TWD if SMP

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4c277d11831bbafbafdcb5fc59e019049918b4e6..bdce4488ded1709b40282e8b14c614ee14e35ac8 100644 (file)
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -71,15 +71,6 @@ config ARM_HIGHBANK_CPUFREQ
 
          If in doubt, say N.
 
-config ARM_DB8500_CPUFREQ
-       tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
-       default ARCH_U8500
-       depends on HAS_IOMEM
-       depends on !CPU_THERMAL || THERMAL
-       help
-         This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
-         series.
-
 config ARM_IMX6Q_CPUFREQ
        tristate "Freescale i.MX6 cpufreq support"
        depends on ARCH_MXC

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 227922b0d42c228469f856cad9828f171d6ecf2a..c7af9b2a255e1914fafd89d5bcfe2032c8db5b07 100644 (file)
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,7 +53,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ)               += arm_big_little_dt.o
 
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)  += brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)             += davinci-cpufreq.o
-obj-$(CONFIG_ARM_DB8500_CPUFREQ)       += dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)   += exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)     += highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)                += imx6q-cpufreq.o

diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
deleted file mode 100644 (file)
index 4ee0431..0000000
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010-2012
- *
- * License Terms: GNU General Public License v2
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/cpu_cooling.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-static struct cpufreq_frequency_table *freq_table;
-static struct clk *armss_clk;
-static struct thermal_cooling_device *cdev;
-
-static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
-                               unsigned int index)
-{
-       /* update armss clk frequency */
-       return clk_set_rate(armss_clk, freq_table[index].frequency * 1000);
-}
-
-static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
-{
-       policy->clk = armss_clk;
-       return cpufreq_generic_init(policy, freq_table, 20 * 1000);
-}
-
-static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
-{
-       if (!IS_ERR(cdev))
-               cpufreq_cooling_unregister(cdev);
-       return 0;
-}
-
-static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
-{
-       cdev = cpufreq_cooling_register(policy);
-       if (IS_ERR(cdev))
-               pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
-       else
-               pr_info("Cooling device registered: %s\n", cdev->type);
-}
-
-static struct cpufreq_driver dbx500_cpufreq_driver = {
-       .flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
-                       CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-       .verify = cpufreq_generic_frequency_table_verify,
-       .target_index = dbx500_cpufreq_target,
-       .get    = cpufreq_generic_get,
-       .init   = dbx500_cpufreq_init,
-       .exit  = dbx500_cpufreq_exit,
-       .ready  = dbx500_cpufreq_ready,
-       .name   = "DBX500",
-       .attr   = cpufreq_generic_attr,
-};
-
-static int dbx500_cpufreq_probe(struct platform_device *pdev)
-{
-       struct cpufreq_frequency_table *pos;
-
-       freq_table = dev_get_platdata(&pdev->dev);
-       if (!freq_table) {
-               pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n");
-               return -ENODEV;
-       }
-
-       armss_clk = clk_get(&pdev->dev, "armss");
-       if (IS_ERR(armss_clk)) {
-               pr_err("dbx500-cpufreq: Failed to get armss clk\n");
-               return PTR_ERR(armss_clk);
-       }
-
-       pr_info("dbx500-cpufreq: Available frequencies:\n");
-       cpufreq_for_each_entry(pos, freq_table)
-               pr_info("  %d Mhz\n", pos->frequency / 1000);
-
-       return cpufreq_register_driver(&dbx500_cpufreq_driver);
-}
-
-static struct platform_driver dbx500_cpufreq_plat_driver = {
-       .driver = {
-               .name = "cpufreq-ux500",
-       },
-       .probe = dbx500_cpufreq_probe,
-};
-
-static int __init dbx500_cpufreq_register(void)
-{
-       return platform_driver_register(&dbx500_cpufreq_plat_driver);
-}
-device_initcall(dbx500_cpufreq_register);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("cpufreq driver for DBX500");