[IA64-SGI] Shub2 BTE address fix
authorRuss Anderson <rja@efs.americas.sgi.com>
Fri, 3 Feb 2006 20:47:15 +0000 (14:47 -0600)
committerTony Luck <tony.luck@intel.com>
Mon, 6 Feb 2006 17:28:10 +0000 (09:28 -0800)
After converting the cpu physical address to shub2 physical
addressing, the address was run through TO_PHYS() which
clobbered a high node offset bit causing the BTE to fail
on shub2 nodes with large memory.  This fix corrects
that problem.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
arch/ia64/sn/kernel/bte.c
include/asm-ia64/sn/bte.h

index dd73c0cb754b4051214f113bf0bad237b684148a..1f11db470d90e97d76cc07c3f8321ad617a47783 100644 (file)
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 #include <linux/config.h>
@@ -186,18 +186,13 @@ retry_bteop:
 
        /* Initialize the notification to a known value. */
        *bte->most_rcnt_na = BTE_WORD_BUSY;
-       notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na));
+       notif_phys_addr = (u64)bte->most_rcnt_na;
 
-       if (is_shub2()) {
-               src = SH2_TIO_PHYS_TO_DMA(src);
-               dest = SH2_TIO_PHYS_TO_DMA(dest);
-               notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr);
-       }
        /* Set the source and destination registers */
-       BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
-       BTE_SRC_STORE(bte, TO_PHYS(src));
-       BTE_PRINTKV(("IBDA = 0x%lx)\n", (TO_PHYS(dest))));
-       BTE_DEST_STORE(bte, TO_PHYS(dest));
+       BTE_PRINTKV(("IBSA = 0x%lx)\n", src));
+       BTE_SRC_STORE(bte, src);
+       BTE_PRINTKV(("IBDA = 0x%lx)\n", dest));
+       BTE_DEST_STORE(bte, dest);
 
        /* Set the notification register */
        BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));
index f50da3d91d07f6844b05bbe42b37c20e940bb1e4..01e5b41032357a1c615c8326d7c7a7ea12df5882 100644 (file)
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 
 #define BTE_LNSTAT_STORE(_bte, _x)                                     \
                        HUB_S(_bte->bte_base_addr, (_x))
 #define BTE_SRC_STORE(_bte, _x)                                                \
-                       HUB_S(_bte->bte_source_addr, (_x))
+({                                                                     \
+               u64 __addr = ((_x) & ~AS_MASK);                         \
+               if (is_shub2())                                         \
+                       __addr = SH2_TIO_PHYS_TO_DMA(__addr);           \
+               HUB_S(_bte->bte_source_addr, __addr);                   \
+})
 #define BTE_DEST_STORE(_bte, _x)                                       \
-                       HUB_S(_bte->bte_destination_addr, (_x))
+({                                                                     \
+               u64 __addr = ((_x) & ~AS_MASK);                         \
+               if (is_shub2())                                         \
+                       __addr = SH2_TIO_PHYS_TO_DMA(__addr);           \
+               HUB_S(_bte->bte_destination_addr, __addr);              \
+})
 #define BTE_CTRL_STORE(_bte, _x)                                       \
                        HUB_S(_bte->bte_control_addr, (_x))
 #define BTE_NOTIF_STORE(_bte, _x)                                      \
-                       HUB_S(_bte->bte_notify_addr, (_x))
+({                                                                     \
+               u64 __addr = ia64_tpa((_x) & ~AS_MASK);                 \
+               if (is_shub2())                                         \
+                       __addr = SH2_TIO_PHYS_TO_DMA(__addr);           \
+               HUB_S(_bte->bte_notify_addr, __addr);                   \
+})
 
 #define BTE_START_TRANSFER(_bte, _len, _mode)                          \
        is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \