- phy-mode: See ethernet.txt file in the same directory
- clocks: a pointer to the reference clock for this device.
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+ Value is presented in bytes. If not used, by default 1600B is set for
+ "marvell,armada-370-neta" and 9800B for others.
+
Example:
ethernet@d0070000 {
reg = <0xd0070000 0x2500>;
interrupts = <8>;
clocks = <&gate_clk 4>;
+ tx-csum-limit = <9800>
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
#define MVNETA_VLAN_TAG_LEN 4
#define MVNETA_CPU_D_CACHE_LINE_SIZE 32
+#define MVNETA_TX_CSUM_DEF_SIZE 1600
#define MVNETA_TX_CSUM_MAX_SIZE 9800
#define MVNETA_ACC_MODE_EXT 1
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
const char *managed;
+ int tx_csum_limit;
int phy_mode;
int err;
int cpu;
}
}
- if (of_device_is_compatible(dn, "marvell,armada-370-neta"))
- pp->tx_csum_limit = 1600;
+ if (!of_property_read_u32(dn, "tx-csum-limit", &tx_csum_limit)) {
+ if (tx_csum_limit < 0 ||
+ tx_csum_limit > MVNETA_TX_CSUM_MAX_SIZE) {
+ tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+ dev_info(&pdev->dev,
+ "Wrong TX csum limit in DT, set to %dB\n",
+ MVNETA_TX_CSUM_DEF_SIZE);
+ }
+ } else if (of_device_is_compatible(dn, "marvell,armada-370-neta")) {
+ tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+ } else {
+ tx_csum_limit = MVNETA_TX_CSUM_MAX_SIZE;
+ }
+
+ pp->tx_csum_limit = tx_csum_limit;
pp->tx_ring_size = MVNETA_MAX_TXD;
pp->rx_ring_size = MVNETA_MAX_RXD;