*/
/* Emit various sounds */
-static int sound;
+static bool sound;
module_param(sound, bool, 0);
MODULE_PARM_DESC(sound, "emit sounds");
/*
* Optionally enable output from the AML Debug Object.
*/
-u32 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
+bool ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
/*
* Optionally copy the entire DSDT to local memory (instead of simply
struct rcu_head rcu;
};
-int ghes_disable;
+bool ghes_disable;
module_param_named(disable, ghes_disable, bool, 0);
static int ghes_panic_timeout __read_mostly = 30;
#define HEST_PFX "HEST: "
-int hest_disable;
+bool hest_disable;
EXPORT_SYMBOL_GPL(hest_disable);
/* HEST table parsing */
MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION);
MODULE_LICENSE("GPL");
-static int immediate_undock = 1;
+static bool immediate_undock = 1;
module_param(immediate_undock, bool, 0644);
MODULE_PARM_DESC(immediate_undock, "1 (default) will cause the driver to "
"undock immediately when the undock button is pressed, 0 will cause"
#include <acpi/acpi_drivers.h>
#include <linux/dmi.h>
-static int debug;
+static bool debug;
static int check_sta_before_sun;
#define DRIVER_VERSION "0.1"
MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
-static int brightness_switch_enabled = 1;
+static bool brightness_switch_enabled = 1;
module_param(brightness_switch_enabled, bool, 0644);
/*
* By default, we don't allow duplicate ACPI video bus devices
* under the same VGA controller
*/
-static int allow_duplicates;
+static bool allow_duplicates;
module_param(allow_duplicates, bool, 0644);
/*
* Some BIOSes claim they use minimum backlight at boot,
* and this may bring dimming screen after boot
*/
-static int use_bios_initial_backlight = 1;
+static bool use_bios_initial_backlight = 1;
module_param(use_bios_initial_backlight, bool, 0644);
static int register_count = 0;
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int adma_enabled;
-static int swncq_enabled = 1;
-static int msi_enabled;
+static bool adma_enabled;
+static bool swncq_enabled = 1;
+static bool msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
{
#endif
};
-static int sata_sil24_msi; /* Disable MSI */
+static bool sata_sil24_msi; /* Disable MSI */
module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
/* globals */
static struct he_dev *he_devs;
-static int disable64;
+static bool disable64;
static short nvpibits = -1;
static short nvcibits = -1;
static short rx_skb_reserve = 16;
-static int irq_coalesce = 1;
-static int sdh = 0;
+static bool irq_coalesce = 1;
+static bool sdh = 0;
/* Read from EEPROM = 0000 0011b */
static unsigned int readtab[] = {
/* module parameter, defined in drbd_main.c */
extern unsigned int minor_count;
-extern int disable_sendpage;
-extern int allow_oos;
+extern bool disable_sendpage;
+extern bool allow_oos;
extern unsigned int cn_idx;
#ifdef CONFIG_DRBD_FAULT_INJECTION
/* module parameter, defined */
unsigned int minor_count = DRBD_MINOR_COUNT_DEF;
-int disable_sendpage;
-int allow_oos;
+bool disable_sendpage;
+bool allow_oos;
unsigned int cn_idx = CN_IDX_DRBD;
int proc_details; /* Detail level in proc drbd*/
*/
-/* PARAMETERS */
-static int verbose; /* set this to 1 to see debugging messages and whatnot */
-
#define BACKPACK_VERSION "2.0.2"
#include <linux/module.h>
#include "ppc6lnx.c"
#include "paride.h"
+/* PARAMETERS */
+static bool verbose; /* set this to 1 to see debugging messages and whatnot */
#define PPCSTRUCT(pi) ((Interface *)(pi->private))
by default.
*/
+#include <linux/types.h>
-static int verbose = 0;
+static bool verbose = 0;
static int major = PD_MAJOR;
static char *name = PD_NAME;
static int cluster = 64;
#define PF_NAME "pf"
#define PF_UNITS 4
+#include <linux/types.h>
+
/* Here are things one can override from the insmod command.
Most are autoprobed by paride unless set here. Verbose is off
by default.
*/
-static int verbose = 0;
+static bool verbose = 0;
static int major = PF_MAJOR;
static char *name = PF_NAME;
static int cluster = 64;
#define PI_PG 4
#endif
+#include <linux/types.h>
/* Here are things one can override from the insmod command.
Most are autoprobed by paride unless set here. Verbose is 0
by default.
*/
-static int verbose = 0;
+static bool verbose = 0;
static int major = PG_MAJOR;
static char *name = PG_NAME;
static int disable = 0;
#define PT_NAME "pt"
#define PT_UNITS 4
+#include <linux/types.h>
+
/* Here are things one can override from the insmod command.
Most are autoprobed by paride unless set here. Verbose is on
by default.
*/
-static int verbose = 0;
+static bool verbose = 0;
static int major = PT_MAJOR;
static char *name = PT_NAME;
static int disable = 0;
static struct timer_list xd_watchdog_int;
static volatile u_char xd_error;
-static int nodma = XD_DONT_USE_DMA;
+static bool nodma = XD_DONT_USE_DMA;
static struct request_queue *xd_queue;
#define VERSION "0.6"
-static int ignore_dga;
-static int ignore_csr;
-static int ignore_sniffer;
-static int disable_scofix;
-static int force_scofix;
+static bool ignore_dga;
+static bool ignore_csr;
+static bool ignore_sniffer;
+static bool disable_scofix;
+static bool force_scofix;
-static int reset = 1;
+static bool reset = 1;
static struct usb_driver btusb_driver;
#define VERSION "0.3"
-static int txcrc = 1;
-static int hciextn = 1;
+static bool txcrc = 1;
+static bool hciextn = 1;
#define BCSP_TXWINSIZE 4
#define VERSION "2.2"
-static int reset = 0;
+static bool reset = 0;
static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
#include <asm/uaccess.h>
/* used to tell the module to turn on full debugging messages */
-static int debug;
+static bool debug;
/* used to keep tray locked at all times */
static int keeplocked;
/* default compatibility mode */
-static int autoclose=1;
-static int autoeject;
-static int lockdoor = 1;
+static bool autoclose=1;
+static bool autoeject;
+static bool lockdoor = 1;
/* will we ever get to use this... sigh. */
-static int check_media_type;
+static bool check_media_type;
/* automatically restart mrw format */
-static int mrw_format_restart = 1;
+static bool mrw_format_restart = 1;
module_param(debug, bool, 0);
module_param(autoclose, bool, 0);
module_param(autoeject, bool, 0);
#define ULI_X86_64_ENU_SCR_REG 0x54
static struct resource *aperture_resource;
-static int __initdata agp_try_unsupported = 1;
+static bool __initdata agp_try_unsupported = 1;
static int agp_bridges_found;
static void amd64_tlbflush(struct agp_memory *temp)
#define PCI_DEVICE_ID_SI_662 0x0662
#define PCI_DEVICE_ID_SI_671 0x0671
-static int __devinitdata agp_sis_force_delay = 0;
+static bool __devinitdata agp_sis_force_delay = 0;
static int __devinitdata agp_sis_agp_spec = -1;
static int sis_fetch_size(void)
MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
MODULE_LICENSE("GPL");
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force loading without checking for supported models");
-static int ignore_dmi;
+static bool ignore_dmi;
module_param(ignore_dmi, bool, 0);
MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
-static int restricted;
+static bool restricted;
module_param(restricted, bool, 0);
MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
-static int power_status;
+static bool power_status;
module_param(power_status, bool, 0600);
MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
#define DEFAULT_REGSPACING 1
#define DEFAULT_REGSIZE 1
-static int si_trydefaults = 1;
+static bool si_trydefaults = 1;
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR];
static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC };
static char *parport[LP_NO];
-static int reset;
+static bool reset;
module_param_array(parport, charp, NULL, 0);
module_param(reset, bool, 0);
#define KFLASH_ID 0x89A6 //Intel flash
#define KFLASH_ID4 0xB0D4 //Intel flash 4Meg
-static int flashdebug; //if set - we will display progress msgs
+static bool flashdebug; //if set - we will display progress msgs
static int gbWriteEnable;
static int gbWriteBase64Enable;
* .text section address and breakpoint on module load.
* This is useful for use with gdb and add-symbol-file command.
*/
-static int break_on_load=0;
+static bool break_on_load=0;
/*
* Driver major number, defaults to zero to get auto
static struct fasync_struct *fasync;
#if 0
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
#define DEBUG_ENT(fmt, arg...) do { \
if (debug) \
return size;
}
-static int itpm;
+static bool itpm;
module_param(itpm, bool, 0444);
MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
return IRQ_HANDLED;
}
-static int interrupts = 1;
+static bool interrupts = 1;
module_param(interrupts, bool, 0444);
MODULE_PARM_DESC(interrupts, "Enable interrupts");
static struct platform_device *pdev;
-static int force;
+static bool force;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
static int __init init_tis(void)
u32 eapr;
};
-static unsigned int disable_hardware_scrub;
+static bool disable_hardware_scrub;
static struct edac_pci_ctl_info *r82600_pci;
*
* Concurrent logins are useful together with cluster filesystems.
*/
-static int sbp2_param_exclusive_login = 1;
+static bool sbp2_param_exclusive_login = 1;
module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644);
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
"(default = Y, use N for concurrent initiators)");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
module_param_array(index, int, NULL, 0444);
module_param_array(id, charp, NULL, 0444);
/* Insmod parameters */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
/* Insmod parameters */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
/* Default verbose is 1, since this driver is still in the testing phase */
-static int verbose = 1;
+static bool verbose = 1;
module_param(verbose, bool, 0644);
MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
#define POWER_ALARM_NAME "power1_alarm"
static int cap_in_hardware;
-static int force_cap_on;
+static bool force_cap_on;
static int can_cap_in_hardware(void)
{
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only;
+static bool read_only;
static const struct i2c_device_id adm1021_id[] = {
I2C_CLIENT_END };
/* Module parameters */
-static int se_input = 1; /* Default is SE, 0 == diff */
-static int int_vref = 1; /* Default is internal ref ON */
+static bool se_input = 1; /* Default is SE, 0 == diff */
+static bool int_vref = 1; /* Default is internal ref ON */
static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
module_param(se_input, bool, S_IRUGO);
module_param(int_vref, bool, S_IRUGO);
static struct platform_device *pdev;
/* Module load parameters */
-static int force_start;
+static bool force_start;
module_param(force_start, bool, 0);
MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-static int probe_all_addr;
+static bool probe_all_addr;
module_param(probe_all_addr, bool, 0);
MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
"addresses");
#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
/* Update battery voltage after every reading if true */
-static int update_vbat;
+static bool update_vbat;
/* Not all BIOSes properly configure the PWM registers */
-static int fix_pwm_polarity;
+static bool fix_pwm_polarity;
/* Many IT87 constants specified below */
/* Insmod parameters */
-static int disable_block;
+static bool disable_block;
module_param(disable_block, bool, 0);
MODULE_PARM_DESC(disable_block,
"Set to non-zero to disable SMBus block data transactions.");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization.");
#define DEV_ID_MAX1989 0xb
/* read only mode module parameter */
-static int read_only;
+static bool read_only;
module_param(read_only, bool, 0);
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
MODULE_PARM_DESC(force_i2c,
"Initialize the i2c address of the sensors");
-static int init = 1;
+static bool init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-static int init = 1;
+static bool init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to one to force extra software initialization");
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to one to force chip initialization");
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
};
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
/* Insmod parameters */
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
size_t buf_len;
};
-static int iic_force_poll, iic_force_normal;
+static bool iic_force_poll, iic_force_normal;
static int iic_timeout = 1000, iic_read_delay;
static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev)
MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
MODULE_LICENSE("GPL");
-static int iic_force_poll;
+static bool iic_force_poll;
module_param(iic_force_poll, bool, 0);
MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
-static int iic_force_fast;
+static bool iic_force_fast;
module_param(iic_force_fast, bool, 0);
MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
static struct pci_driver sis630_driver;
/* insmod parameters */
-static int high_clock;
-static int force;
+static bool high_clock;
+static bool force;
module_param(high_clock, bool, 0);
MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz).");
module_param(force, bool, 0);
/* If force is set to anything different from 0, we forcibly enable the
VT596. DANGEROUS! */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
return ide_legacy_device_add(&ali14xx_port_info, 0);
}
-static int probe_ali14xx;
+static bool probe_ali14xx;
module_param_named(probe, probe_ali14xx, bool, 0);
MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");
#define DRV_NAME "cmd640"
-static int cmd640_vlb;
+static bool cmd640_vlb;
/*
* CMD640 specific registers definition.
return ide_legacy_device_add(&dtc2278_port_info, 0);
}
-static int probe_dtc2278;
+static bool probe_dtc2278;
module_param_named(probe, probe_dtc2278, bool, 0);
MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
-static int ide_doubler;
+static bool ide_doubler;
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
ide_set_drivedata(drive, (void *)t);
}
-static int probe_ht6560b;
+static bool probe_ht6560b;
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
#define DRV_NAME "ide-4drives"
-static int probe_4drives;
+static bool probe_4drives;
module_param_named(probe, probe_4drives, bool, 0);
MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
#define DEBPRINT(fmt, args...) do {} while (0)
#endif /* DEBUGGING */
-static int ide_noacpi;
+static bool ide_noacpi;
module_param_named(noacpi, ide_noacpi, bool, 0);
MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
-static int ide_acpigtf;
+static bool ide_acpigtf;
module_param_named(acpigtf, ide_acpigtf, bool, 0);
MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
-static int ide_acpionboot;
+static bool ide_acpionboot;
module_param_named(acpionboot, ide_acpionboot, bool, 0);
MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
#define DRV_NAME "ide_pci_generic"
-static int ide_generic_all; /* Set to claim all devices */
+static bool ide_generic_all; /* Set to claim all devices */
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
return rc;
}
-static int probe_qd65xx;
+static bool probe_qd65xx;
module_param_named(probe, probe_qd65xx, bool, 0);
MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
return ide_legacy_device_add(&umc8672_port_info, 0);
}
-static int probe_umc8672;
+static bool probe_umc8672;
module_param_named(probe, probe_umc8672, bool, 0);
MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");
extern int ehca_static_rate;
extern int ehca_port_act_time;
-extern int ehca_use_hp_mr;
-extern int ehca_scaling_code;
+extern bool ehca_use_hp_mr;
+extern bool ehca_scaling_code;
extern int ehca_lock_hcalls;
extern int ehca_nr_ports;
extern int ehca_max_cq;
MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver");
MODULE_VERSION(HCAD_VERSION);
-static int ehca_open_aqp1 = 0;
+static bool ehca_open_aqp1 = 0;
static int ehca_hw_level = 0;
-static int ehca_poll_all_eqs = 1;
+static bool ehca_poll_all_eqs = 1;
int ehca_debug_level = 0;
int ehca_nr_ports = -1;
-int ehca_use_hp_mr = 0;
+bool ehca_use_hp_mr = 0;
int ehca_port_act_time = 30;
int ehca_static_rate = -1;
-int ehca_scaling_code = 0;
+bool ehca_scaling_code = 0;
int ehca_lock_hcalls = -1;
int ehca_max_cq = -1;
int ehca_max_qp = -1;
module_param(wqm_quanta, int, 0644);
MODULE_PARM_DESC(wqm_quanta, "WQM quanta");
-static unsigned int limit_maxrdreqsz;
+static bool limit_maxrdreqsz;
module_param(limit_maxrdreqsz, bool, 0644);
MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes");
#define XTYPE_XBOX360W 2
#define XTYPE_UNKNOWN 3
-static int dpad_to_buttons;
+static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
-static int triggers_to_buttons;
+static bool triggers_to_buttons;
module_param(triggers_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
-static int sticks_to_null;
+static bool sticks_to_null;
module_param(sticks_to_null, bool, S_IRUGO);
MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
MODULE_LICENSE("GPL v2");
MODULE_VERSION("0.3");
-static int force; /* = 0; */
+static bool force; /* = 0; */
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Load even if computer is not in database");
module_param_named(rate, psmouse_rate, uint, 0644);
MODULE_PARM_DESC(rate, "Report rate, in reports per second.");
-static unsigned int psmouse_smartscroll = 1;
+static bool psmouse_smartscroll = 1;
module_param_named(smartscroll, psmouse_smartscroll, bool, 0644);
MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
#define NO_DATA_SLEEP_MSECS (MSEC_PER_SEC / 4)
/* Control touchpad's No Deceleration option */
-static int no_decel = 1;
+static bool no_decel = 1;
module_param(no_decel, bool, 0644);
MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
/* Control touchpad's Reduced Reporting option */
-static int reduce_report;
+static bool reduce_report;
module_param(reduce_report, bool, 0644);
MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
/* Control touchpad's No Filter option */
-static int no_filter;
+static bool no_filter;
module_param(no_filter, bool, 0644);
MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
EXPORT_SYMBOL(hp_sdc_enqueue_transaction);
EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
-static unsigned int hp_sdc_disabled;
+static bool hp_sdc_disabled;
module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0);
MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
#include <linux/input/eeti_ts.h>
#include <linux/slab.h>
-static int flip_x;
+static bool flip_x;
module_param(flip_x, bool, 0644);
MODULE_PARM_DESC(flip_x, "flip x coordinate");
-static int flip_y;
+static bool flip_y;
module_param(flip_y, bool, 0644);
MODULE_PARM_DESC(flip_y, "flip y coordinate");
#define X_AXIS_MAX 2040
#define Y_AXIS_MAX 2040
-static int invert_x;
+static bool invert_x;
module_param(invert_x, bool, 0644);
MODULE_PARM_DESC(invert_x, "If set, X axis is inverted");
-static int invert_y;
+static bool invert_y;
module_param(invert_y, bool, 0644);
MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
#define UCB1400_TS_POLL_PERIOD 10 /* ms */
-static int adcsync;
+static bool adcsync;
static int ts_delay = 55; /* us */
static int ts_delay_pressure; /* us */
#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
#define DRIVER_DESC "USB Touchscreen Driver"
-static int swap_xy;
+static bool swap_xy;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
-static int hwcalib_xy;
+static bool hwcalib_xy;
module_param(hwcalib_xy, bool, 0644);
MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
MODULE_AUTHOR("Carsten Paeth");
MODULE_LICENSE("GPL");
-static int suppress_pollack = 0;
+static bool suppress_pollack = 0;
module_param(suppress_pollack, bool, 0);
/* ------------------------------------------------------------- */
/* ------------------------------------------------------------- */
-static int suppress_pollack;
+static bool suppress_pollack;
static struct pci_device_id c4_pci_tbl[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 },
static unsigned int io[] = {0,0,0,0};
static unsigned char irq[] = {0,0,0,0};
static unsigned long ram[] = {0,0,0,0};
-static int do_reset = 0;
+static bool do_reset = 0;
module_param_array(io, int, NULL, 0);
module_param_array(irq, int, NULL, 0);
MODULE_DESCRIPTION("Clevo mail LED driver");
MODULE_LICENSE("GPL");
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
return 1;
}
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
/* There is only one motion sensor per machine */
struct ams ams_info;
-static unsigned int verbose;
+static bool verbose;
module_param(verbose, bool, 0644);
MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
#include "ams.h"
-static unsigned int joystick;
+static bool joystick;
module_param(joystick, bool, S_IRUGO);
MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
-static unsigned int invert;
+static bool invert;
module_param(invert, bool, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
static int limit_adjust;
static int fan_speed = -1;
-static int verbose;
+static bool verbose;
MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
"set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))."
DVB_USB_DEBUG_STATUS);
/* enable obnoxious led */
-int dvb_usb_af9005_led = 1;
+bool dvb_usb_af9005_led = 1;
module_param_named(led, dvb_usb_af9005_led, bool, 0644);
MODULE_PARM_DESC(led, "enable led (default: 1).");
#define deb_i2c(args...) dprintk(dvb_usb_af9005_debug,0x10,args)
#define deb_fw(args...) dprintk(dvb_usb_af9005_debug,0x20,args)
-extern int dvb_usb_af9005_led;
+extern bool dvb_usb_af9005_led;
/* firmware */
#define FW_BULKOUT_SIZE 250
#endif
static int io = CONFIG_RADIO_GEMTEK_PORT;
-static int probe = CONFIG_RADIO_GEMTEK_PROBE;
-static int hardmute;
-static int shutdown = 1;
-static int keepmuted = 1;
-static int initmute = 1;
+static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
+static bool hardmute;
+static bool shutdown = 1;
+static bool keepmuted = 1;
+static bool initmute = 1;
static int radio_nr = -1;
module_param(io, int, 0444);
module_param(radio_nr, int, 0);
MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX). Default: -1 (autodetect)");
-static int mono;
+static bool mono;
module_param(mono, bool, 0);
MODULE_PARM_DESC(mono, "Force tuner into mono mode.");
#include <media/lirc.h>
#include <media/lirc_dev.h>
-static int debug;
+static bool debug;
#define IRCTL_DEV_NAME "BaseRemoteCtl"
#define NOPLUG -1
/* module parameters */
#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
+static bool debug = 1;
#else
-static int debug;
+static bool debug;
#endif
#define mce_dbg(dev, fmt, ...) \
#define DRIVER_DESC "Streamzap Remote Control driver"
#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
+static bool debug = 1;
#else
-static int debug;
+static bool debug;
#endif
#define USB_STREAMZAP_VENDOR_ID 0x0e9c
MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
"(0 = RC5, 1 = NEC, 2 = RC6A, default)");
-static int invert; /* default = 0 */
+static bool invert; /* default = 0 */
module_param(invert, bool, 0444);
MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
-static int txandrx; /* default = 0 */
+static bool txandrx; /* default = 0 */
module_param(txandrx, bool, 0444);
MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
static int probe = 2;
-static int force_rgb;
+static bool force_rgb;
static int video_nr = -1;
/* FIXME: parport=auto would never have worked, surely? --RR */
MODULE_AUTHOR("Hans Verkuil");
MODULE_LICENSE("GPL");
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_AUTHOR("Martin Vaughan");
MODULE_LICENSE("GPL");
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
-1, -1, -1, -1, -1, -1, -1, -1 };
static unsigned cardtype_c = 1;
static unsigned tuner_c = 1;
-static unsigned radio_c = 1;
+static bool radio_c = 1;
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 };
+static bool enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 };
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable cx25821 soundcard. default enabled.");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
+static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled.");
/* Kernel module parameters */
int force_sensor;
-static int dump_bridge;
-int dump_sensor;
+static bool dump_bridge;
+bool dump_sensor;
static const struct usb_device_id m5602_table[] = {
{USB_DEVICE(0x0402, 0x5602)},
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int mt9m111_probe(struct sd *sd);
int mt9m111_init(struct sd *sd);
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int ov7660_probe(struct sd *sd);
int ov7660_init(struct sd *sd);
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int ov9650_probe(struct sd *sd);
int ov9650_init(struct sd *sd);
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int po1030_probe(struct sd *sd);
int po1030_init(struct sd *sd);
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int s5k4aa_probe(struct sd *sd);
int s5k4aa_init(struct sd *sd);
/* Kernel module parameters */
extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
int s5k83a_probe(struct sd *sd);
int s5k83a_init(struct sd *sd);
MODULE_DESCRIPTION("STV06XX USB Camera Driver");
MODULE_LICENSE("GPL");
-static int dump_bridge;
-static int dump_sensor;
+static bool dump_bridge;
+static bool dump_sensor;
int stv06xx_write_bridge(struct sd *sd, u16 address, u16 i2c_data)
{
MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / "
"1=RCA front / 2=S/PDIF");
-static int boost_audio;
+static bool boost_audio;
module_param(boost_audio, bool, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(boost_audio, "boost the audio signal");
static unsigned int cardtype_c = 1;
static unsigned int tuner_c = 1;
-static unsigned int radio_c = 1;
+static bool radio_c = 1;
static unsigned int i2c_clock_period_c = 1;
static char pal[] = "---";
static char secam[] = "--";
/* card parameters */
static int ivtvfb_card_id = -1;
static int ivtvfb_debug = 0;
-static int osd_laced;
+static bool osd_laced;
static int osd_depth;
static int osd_upper;
static int osd_left;
* sense.
*/
-static int alloc_bufs_at_read;
+static bool alloc_bufs_at_read;
module_param(alloc_bufs_at_read, bool, 0444);
MODULE_PARM_DESC(alloc_bufs_at_read,
"Non-zero value causes DMA buffers to be allocated when the "
"parameters require larger buffers, an attempt to reallocate "
"will be made.");
#else /* MCAM_MODE_VMALLOC */
-static const int alloc_bufs_at_read = 0;
+static const bool alloc_bufs_at_read = 0;
static const int n_dma_bufs = 3; /* Used by S/G_PARM */
#endif /* MCAM_MODE_VMALLOC */
-static int flip;
+static bool flip;
module_param(flip, bool, 0444);
MODULE_PARM_DESC(flip,
"If set, the sensor will be instructed to flip the image "
/* module parameters */
static int opmode = OPMODE_AUTO;
int msp_debug; /* msp_debug output */
-int msp_once; /* no continuous stereo monitoring */
-int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france),
+bool msp_once; /* no continuous stereo monitoring */
+bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france),
the autoscan seems work well only with FM... */
int msp_standard = 1; /* Override auto detect of audio msp_standard,
if needed. */
-int msp_dolby;
+bool msp_dolby;
int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual
(msp34xxg only) 0x00a0-0x03c0 */
/* module parameters */
extern int msp_debug;
-extern int msp_once;
-extern int msp_amsound;
+extern bool msp_once;
+extern bool msp_amsound;
extern int msp_standard;
-extern int msp_dolby;
+extern bool msp_dolby;
extern int msp_stereo_thresh;
struct msp_state {
static u32 video2_numbuffers = 3;
static u32 video1_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
static u32 video2_bufsize = OMAP_VOUT_MAX_BUF_SIZE;
-static u32 vid1_static_vrfb_alloc;
-static u32 vid2_static_vrfb_alloc;
-static int debug;
+static bool vid1_static_vrfb_alloc;
+static bool vid2_static_vrfb_alloc;
+static bool debug;
/* Module parameters */
module_param(video1_numbuffers, uint, S_IRUGO);
}
int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
- u32 static_vrfb_allocation)
+ bool static_vrfb_allocation)
{
int ret = 0, i, j;
struct omap_vout_device *vout;
MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
MODULE_LICENSE("GPL");
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
"Hans Verkuil, Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#include "stk-webcam.h"
-static int hflip = 1;
+static bool hflip = 1;
module_param(hflip, bool, 0444);
MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 1");
-static int vflip = 1;
+static bool vflip = 1;
module_param(vflip, bool, 0444);
MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 1");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
+static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled.");
#define LOCK_RETRY_DELAY (200)
/* Debug functions */
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define TVP7002_CL_MASK 0x0f
/* Debug functions */
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
MODULE_LICENSE("GPL");
-static int debug;
+static bool debug;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
MODULE_DESCRIPTION("VIA framebuffer-based camera controller driver");
MODULE_LICENSE("GPL");
-static int flip_image;
+static bool flip_image;
module_param(flip_image, bool, 0444);
MODULE_PARM_DESC(flip_image,
"If set, the sensor will be instructed to flip the image "
"vertically.");
-static int override_serial;
+static bool override_serial;
module_param(override_serial, bool, 0444);
MODULE_PARM_DESC(override_serial,
"The camera driver will normally refuse to load if "
ZR36057_ISR_GIRQ1 | \
ZR36057_ISR_JPEGRepIRQ )
-static int lml33dpath; /* default = 0
+static bool lml33dpath; /* default = 0
* 1 will use digital path in capture
* mode instead of analog. It can be
* used for picture adjustments using
/* amount of chips attached via this driver */
static int zr36060_codecs;
-static int low_bitrate;
+static bool low_bitrate;
module_param(low_bitrate, bool, 0);
MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
#define DRIVER_NAME "jmb38x_ms"
-static int no_dma;
+static bool no_dma;
module_param(no_dma, bool, 0644);
enum {
#include <linux/swab.h>
#include "r592.h"
-static int r592_enable_dma = 1;
+static bool r592_enable_dma = 1;
static int debug;
static const char *tpc_names[] = {
#define DRIVER_NAME "tifm_ms"
-static int no_dma;
+static bool no_dma;
module_param(no_dma, bool, 0644);
/*
module_param(blocks, int, 0604);
MODULE_PARM_DESC(blocks, "max_blocks_to_send");
-static int dump;
+static bool dump;
module_param(dump, bool, 0604);
MODULE_PARM_DESC(dump, "dump_hex_content");
-static int jump = 1;
+static bool jump = 1;
module_param(jump, bool, 0604);
-static int direct = 1;
+static bool direct = 1;
module_param(direct, bool, 0604);
-static int checksum = 1;
+static bool checksum = 1;
module_param(checksum, bool, 0604);
-static int fw_download = 1;
+static bool fw_download = 1;
module_param(fw_download, bool, 0604);
static int block_size = IWMC_SDIO_BLK_SIZE;
static int download_trans_blks = IWMC_DEFAULT_TR_BLK;
module_param(download_trans_blks, int, 0604);
-static int rubbish_barker;
+static bool rubbish_barker;
module_param(rubbish_barker, bool, 0604);
#ifdef CONFIG_IWMC3200TOP_DEBUG
* performance cost, and for other reasons may not always be desired.
* So we allow it it to be disabled.
*/
-int use_spi_crc = 1;
+bool use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);
/*
* overridden if necessary.
*/
#ifdef CONFIG_MMC_UNSAFE_RESUME
-int mmc_assume_removable;
+bool mmc_assume_removable;
#else
-int mmc_assume_removable = 1;
+bool mmc_assume_removable = 1;
#endif
EXPORT_SYMBOL(mmc_assume_removable);
module_param_named(removable, mmc_assume_removable, bool, 0644);
int mmc_attach_sdio(struct mmc_host *host);
/* Module parameters */
-extern int use_spi_crc;
+extern bool use_spi_crc;
/* Debugfs information for hosts and cards */
void mmc_add_host_debugfs(struct mmc_host *host);
#define DRIVER_NAME "tifm_sd"
#define DRIVER_VERSION "0.8"
-static int no_dma = 0;
-static int fixed_timeout = 0;
+static bool no_dma = 0;
+static bool fixed_timeout = 0;
module_param(no_dma, bool, 0644);
module_param(fixed_timeout, bool, 0644);
#define FUN(c) (0x000007 & (c->arg>>28))
#define REG(c) (0x01FFFF & (c->arg>>9))
-static int limit_speed_to_24_MHz;
+static bool limit_speed_to_24_MHz;
module_param(limit_speed_to_24_MHz, bool, 0644);
MODULE_PARM_DESC(limit_speed_to_24_MHz, "Limit Max SDIO Clock Speed to 24 MHz");
-static int pad_input_to_usb_pkt;
+static bool pad_input_to_usb_pkt;
module_param(pad_input_to_usb_pkt, bool, 0644);
MODULE_PARM_DESC(pad_input_to_usb_pkt,
"Pad USB data input transfers to whole USB Packet");
-static int disable_offload_processing;
+static bool disable_offload_processing;
module_param(disable_offload_processing, bool, 0644);
MODULE_PARM_DESC(disable_offload_processing, "Disable Offload Processing");
-static int force_1_bit_data_xfers;
+static bool force_1_bit_data_xfers;
module_param(force_1_bit_data_xfers, bool, 0644);
MODULE_PARM_DESC(force_1_bit_data_xfers,
"Force SDIO Data Transfers to 1-bit Mode");
-static int force_polling_for_irqs;
+static bool force_polling_for_irqs;
module_param(force_polling_for_irqs, bool, 0644);
MODULE_PARM_DESC(force_polling_for_irqs, "Force Polling for SDIO interrupts");
uint32_t ndcb2;
};
-static int use_dma = 1;
+static bool use_dma = 1;
module_param(use_dma, bool, 0444);
MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
#include "r852.h"
-static int r852_enable_dma = 1;
+static bool r852_enable_dma = 1;
module_param(r852_enable_dma, bool, S_IRUGO);
MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
#define PARPORT_IP32_ENABLE_EPP (1U << 3)
#define PARPORT_IP32_ENABLE_ECP (1U << 4)
static unsigned int features = ~0U;
-static int verbose_probing = DEFAULT_VERBOSE_PROBING;
+static bool verbose_probing = DEFAULT_VERBOSE_PROBING;
/* We do not support more than one port. */
static struct parport *this_port = NULL;
#define METHOD_NAME__SUN "_SUN"
#define METHOD_NAME_OSHP "OSHP"
-static int debug_acpi;
+static bool debug_acpi;
static acpi_status
decode_type0_hpx_record(union acpi_object *record, struct hotplug_params *hpx)
/* name size which is used for entries in pcihpfs */
#define SLOT_NAME_SIZE 21 /* {_SUN} */
-static int debug;
+static bool debug;
int acpiphp_debug;
/* local variables */
#define DRIVER_AUTHOR "Irene Zubarev <zubarev@us.ibm.com>, Vernon Mauery <vernux@us.ibm.com>"
#define DRIVER_DESC "ACPI Hot Plug PCI Controller Driver IBM extension"
-static int debug;
+static bool debug;
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
/* local variables */
-static int debug;
-static int poll;
+static bool debug;
+static bool poll;
static struct cpci_hp_controller_ops zt5550_hpc_ops;
static struct cpci_hp_controller zt5550_hpc;
static void __iomem *smbios_table;
static void __iomem *smbios_start;
static void __iomem *cpqhp_rom_start;
-static int power_mode;
-static int debug;
+static bool power_mode;
+static bool debug;
static int initialized;
#define DRIVER_VERSION "0.9.8"
int ibmphp_debug;
-static int debug;
+static bool debug;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC (debug, "Debugging mode enabled or not");
MODULE_LICENSE ("GPL");
/* local variables */
-static int debug;
+static bool debug;
#define DRIVER_VERSION "0.5"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Scott Murray <scottm@somanetworks.com>"
#define MY_NAME "pciehp"
-extern int pciehp_poll_mode;
+extern bool pciehp_poll_mode;
extern int pciehp_poll_time;
-extern int pciehp_debug;
-extern int pciehp_force;
+extern bool pciehp_debug;
+extern bool pciehp_force;
extern struct workqueue_struct *pciehp_wq;
#define dbg(format, arg...) \
#include <linux/time.h>
/* Global variables */
-int pciehp_debug;
-int pciehp_poll_mode;
+bool pciehp_debug;
+bool pciehp_poll_mode;
int pciehp_poll_time;
-int pciehp_force;
+bool pciehp_force;
struct workqueue_struct *pciehp_wq;
#define DRIVER_VERSION "0.4"
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
/* local variables */
-static int debug;
+static bool debug;
static int num_slots;
#define DRIVER_VERSION "0.3"
#define PRESENT 1 /* Card in slot */
#define MY_NAME "rpaphp"
-extern int rpaphp_debug;
+extern bool rpaphp_debug;
#define dbg(format, arg...) \
do { \
if (rpaphp_debug) \
/* and pci_do_scan_bus */
#include "rpaphp.h"
-int rpaphp_debug;
+bool rpaphp_debug;
LIST_HEAD(rpaphp_slot_head);
#define DRIVER_VERSION "0.1"
#define MY_NAME THIS_MODULE->name
#endif
-extern int shpchp_poll_mode;
+extern bool shpchp_poll_mode;
extern int shpchp_poll_time;
-extern int shpchp_debug;
+extern bool shpchp_debug;
extern struct workqueue_struct *shpchp_wq;
extern struct workqueue_struct *shpchp_ordered_wq;
#include "shpchp.h"
/* Global variables */
-int shpchp_debug;
-int shpchp_poll_mode;
+bool shpchp_debug;
+bool shpchp_poll_mode;
int shpchp_poll_time;
struct workqueue_struct *shpchp_wq;
struct workqueue_struct *shpchp_ordered_wq;
#include "aerdrv.h"
/* Override the existing corrected and uncorrected error masks */
-static int aer_mask_override;
+static bool aer_mask_override;
module_param(aer_mask_override, bool, 0);
struct aer_error_inj {
#include <linux/kfifo.h>
#include "aerdrv.h"
-static int forceload;
-static int nosourceid;
+static bool forceload;
+static bool nosourceid;
module_param(forceload, bool, 0);
module_param(nosourceid, bool, 0);
#include "yenta_socket.h"
#include "i82365.h"
-static int disable_clkrun;
+static bool disable_clkrun;
module_param(disable_clkrun, bool, 0444);
MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
-static int isa_probe = 1;
+static bool isa_probe = 1;
module_param(isa_probe, bool, 0444);
MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing");
-static int pwr_irqs_off;
+static bool pwr_irqs_off;
module_param(pwr_irqs_off, bool, 0644);
MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!");
/* =============== */
/* General globals */
/* =============== */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
#define OT_EC_BL_CONTROL_ON_DATA 0x1A
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
#define MSI_STANDARD_EC_DEVICES_EXISTS_ADDRESS 0x2f
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
static struct rfkill *rfk;
static bool has_stepping_quirk;
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force,
"Disable the DMI check and forces the driver to be loaded");
-static int debug;
+static bool debug;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
static int dbg_wlswemul;
-static int tpacpi_wlsw_emulstate;
+static bool tpacpi_wlsw_emulstate;
static int dbg_bluetoothemul;
-static int tpacpi_bluetooth_emulstate;
+static bool tpacpi_bluetooth_emulstate;
static int dbg_wwanemul;
-static int tpacpi_wwan_emulstate;
+static bool tpacpi_wwan_emulstate;
static int dbg_uwbemul;
-static int tpacpi_uwb_emulstate;
+static bool tpacpi_uwb_emulstate;
#endif
static int alsa_index = ~((1 << (SNDRV_CARDS - 3)) - 1); /* last three slots */
static char *alsa_id = "ThinkPadEC";
-static int alsa_enable = SNDRV_DEFAULT_ENABLE1;
+static bool alsa_enable = SNDRV_DEFAULT_ENABLE1;
struct tpacpi_alsa_data {
struct snd_card *card;
TPACPI_VOL_MODE_MAX;
static enum tpacpi_volume_capabilities volume_capabilities;
-static int volume_control_allowed;
+static bool volume_control_allowed;
/*
* Used to syncronize writers to TP_EC_AUDIO and
* and also watchdog cmd */
};
-static int fan_control_allowed;
+static bool fan_control_allowed;
static enum fan_status_access_mode fan_status_access_mode;
static enum fan_control_access_mode fan_control_access_mode;
* Module and infrastructure proble, init and exit handling
*/
-static int force_load;
+static bool force_load;
#ifdef CONFIG_THINKPAD_ACPI_DEBUG
static const char * __init str_supported(int is_supported)
#define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */
#define ACPI_WMI_EVENT 0x8 /* GUID is an event */
-static int debug_event;
+static bool debug_event;
module_param(debug_event, bool, 0444);
MODULE_PARM_DESC(debug_event,
"Log WMI Events [0/1]");
-static int debug_dump_wdg;
+static bool debug_dump_wdg;
module_param(debug_dump_wdg, bool, 0444);
MODULE_PARM_DESC(debug_dump_wdg,
"Dump available WMI interfaces [0/1]");
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
-static unsigned int pmod_enabled;
+static bool pmod_enabled;
module_param(pmod_enabled, bool, 0644);
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
static int raw3270_registered;
/* Module parameters */
-static int tubxcorrect = 0;
+static bool tubxcorrect = 0;
module_param(tubxcorrect, bool, 0);
/*
#define MAX_CMDLEN 240
#define MIN_INTERVAL 15
static char vmwdt_cmd[MAX_CMDLEN] = "IPL";
-static int vmwdt_conceal;
+static bool vmwdt_conceal;
-static int vmwdt_nowayout = WATCHDOG_NOWAYOUT;
+static bool vmwdt_nowayout = WATCHDOG_NOWAYOUT;
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
*/
#if defined(MODULE)
-static int isapnp = 0;
+static bool isapnp = 0;
static int aha1542[] = {0x330, 11, 4, -1};
module_param_array(aha1542, int, NULL, 0);
module_param(isapnp, bool, 0);
* command line overrides will be used. If set to 1 then safe and
* slow settings will be used.
*/
-static int use_safe_settings = 0;
+static bool use_safe_settings = 0;
module_param_named(safe, use_safe_settings, bool, 0);
MODULE_PARM_DESC(safe, "Use safe and slow settings only. Default: false");
#define ASYNC_MODE 1
#define ULTRA20M_MODE 2
-static int auto_param = 0; /* default: ON */
+static bool auto_param = 0; /* default: ON */
module_param (auto_param, bool, 0);
MODULE_PARM_DESC(auto_param, "AutoParameter mode (0: ON(default) 1: OFF)");
-static int disc_priv = 1; /* default: OFF */
+static bool disc_priv = 1; /* default: OFF */
module_param (disc_priv, bool, 0);
MODULE_PARM_DESC(disc_priv, "disconnection privilege mode (0: ON 1: OFF(default))");
MODULE_PARM_DESC(nsp_burst_mode, "Burst transfer mode (0=io8, 1=io32, 2=mem32(default))");
/* Release IO ports after configuration? */
-static int free_ports = 0;
+static bool free_ports = 0;
module_param(free_ports, bool, 0);
MODULE_PARM_DESC(free_ports, "Release IO ports after configuration? (default: 0 (=no))");
module_param(comedi_debug, int, 0644);
#endif
-int comedi_autoconfig = 1;
+bool comedi_autoconfig = 1;
module_param(comedi_autoconfig, bool, 0444);
static int comedi_num_legacy_minors;
#ifndef _COMEDI_FOPS_H
#define _COMEDI_FOPS_H
+#include <linux/types.h>
extern struct class *comedi_class;
extern const struct file_operations comedi_fops;
-extern int comedi_autoconfig;
+extern bool comedi_autoconfig;
extern struct comedi_driver *comedi_drivers;
#endif /* _COMEDI_FOPS_H */
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
module_param_array(index, int, NULL, 0444);
module_param_array(id, charp, NULL, 0444);
#define DRIVER_NAME "lirc_bt829"
-static int debug;
+static bool debug;
#define dprintk(fmt, args...) \
do { \
if (debug) \
/* debugging support */
#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
+static bool debug = 1;
#else
-static int debug;
+static bool debug;
#endif
#define dprintk(fmt, args...) \
/*** Global Variables ***/
-static int debug;
-static int check_pselecd;
+static bool debug;
+static bool check_pselecd;
unsigned int irq = LIRC_IRQ;
unsigned int io = LIRC_PORT;
static int type;
static int io;
static int irq;
-static int iommap;
+static bool iommap;
static int ioshift;
-static int softcarrier = 1;
-static int share_irq;
-static int debug;
+static bool softcarrier = 1;
+static bool share_irq;
+static bool debug;
static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */
-static int txsense; /* 0 = active high, 1 = active low */
+static bool txsense; /* 0 = active high, 1 = active low */
#define dprintk(fmt, args...) \
do { \
static int rx_buf[RBUF_LEN];
static unsigned int rx_tail, rx_head;
-static int debug;
+static bool debug;
#define dprintk(fmt, args...) \
do { \
if (debug) \
#define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args)
/* module parameters */
-static int debug; /* debug output */
-static int tx_only; /* only handle the IR Tx function */
+static bool debug; /* debug output */
+static bool tx_only; /* only handle the IR Tx function */
static int minor = -1; /* minor number */
#define dprintk(fmt, args...) \
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
-static int debug;
+static bool debug;
/* Version Information */
#define DRIVER_VERSION "v2.00"
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
-static int debug;
+static bool debug;
/* Version Information */
#define DRIVER_VERSION "v2.14"
extern int spell_delay, key_echo;
extern short punc_mask;
extern short pitch_shift, synth_flags;
-extern int quiet_boot;
+extern bool quiet_boot;
extern char *synth_name;
extern struct bleep unprocessed_sound;
struct spk_synth *synth;
char pitch_buff[32] = "";
static int module_status;
-int quiet_boot;
+bool quiet_boot;
struct speakup_info_t speakup_info = {
.spinlock = __SPIN_LOCK_UNLOCKED(speakup_info.spinlock),
/* Module parameter */
-static int err_chk;
+static bool err_chk;
static int geoid;
static const char driver_name[] = "vme_tsi148";
static unsigned long board3;
static unsigned long board4;
static unsigned long controller;
-static int support_low_speed;
+static bool support_low_speed;
static unsigned long modem1;
static unsigned long modem2;
static unsigned long modem3;
* .text section address and breakpoint on module load.
* This is useful for use with gdb and add-symbol-file command.
*/
-static int break_on_load;
+static bool break_on_load;
/*
* Driver major number, defaults to zero to get auto
* .text section address and breakpoint on module load.
* This is useful for use with gdb and add-symbol-file command.
*/
-static int break_on_load = 0;
+static bool break_on_load = 0;
/*
* Driver major number, defaults to zero to get auto
#define DEFAULT_SW_BUFFERING 0
static unsigned int altsetting = 0; /* zero means: use the default */
-static int dl_512_first = DEFAULT_DL_512_FIRST;
-static int enable_isoc = DEFAULT_ENABLE_ISOC;
-static int sw_buffering = DEFAULT_SW_BUFFERING;
+static bool dl_512_first = DEFAULT_DL_512_FIRST;
+static bool enable_isoc = DEFAULT_ENABLE_ISOC;
+static bool sw_buffering = DEFAULT_SW_BUFFERING;
#define DEFAULT_B_MAX_DSL 8128
#define DEFAULT_MODEM_MODE 11
static unsigned int debug;
static unsigned int altsetting[NB_MODEM] = {
[0 ... (NB_MODEM - 1)] = FASTEST_ISO_INTF};
-static int sync_wait[NB_MODEM];
+static bool sync_wait[NB_MODEM];
static char *cmv_file[NB_MODEM];
static int annex[NB_MODEM];
u8 bulk_status;
};
-static int usbfs_snoop;
+static bool usbfs_snoop;
module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
static struct task_struct *khubd_task;
/* cycle leds on hubs that aren't blinking for attention */
-static int blinkenlights = 0;
+static bool blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
* otherwise the new scheme is used. If that fails and "use_both_schemes"
* is set, then the driver will make another attempt, using the other scheme.
*/
-static int old_scheme_first = 0;
+static bool old_scheme_first = 0;
module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(old_scheme_first,
"start with the old device initialization scheme");
-static int use_both_schemes = 1;
+static bool use_both_schemes = 1;
module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(use_both_schemes,
"try the other device initialization scheme if the "
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
-#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first)
+#define USE_NEW_SCHEME(i) ((i) / 2 == (int)old_scheme_first)
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
const char *usbcore_name = "usbcore";
-static int nousb; /* Disable USB when built into kernel image */
+static bool nousb; /* Disable USB when built into kernel image */
#ifdef CONFIG_USB_SUSPEND
static int usb_autosuspend_delay = 2; /* Default delay value,
};
/* DMA usage flag */
-static int use_dma = 1;
+static bool use_dma = 1;
/* packet per buffer dma */
-static int use_dma_ppb = 1;
+static bool use_dma_ppb = 1;
/* with per descr. update */
-static int use_dma_ppb_du;
+static bool use_dma_ppb_du;
/* buffer fill mode */
static int use_dma_bufferfill_mode;
/* full speed only mode */
-static int use_fullspeed;
+static bool use_fullspeed;
/* tx buffer size for high speed */
static unsigned long hs_tx_buf = UDC_EPIN_BUFF_SIZE;
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_USB_ETH_EEM
-static int use_eem = 1;
+static bool use_eem = 1;
#else
-static int use_eem;
+static bool use_eem;
#endif
module_param(use_eem, bool, 0);
MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
static struct {
char *file[FSG_MAX_LUNS];
char *serial;
- int ro[FSG_MAX_LUNS];
- int nofua[FSG_MAX_LUNS];
+ bool ro[FSG_MAX_LUNS];
+ bool nofua[FSG_MAX_LUNS];
unsigned int num_filenames;
unsigned int num_ros;
unsigned int num_nofuas;
unsigned int nluns;
- int removable;
- int can_stall;
- int cdrom;
+ bool removable;
+ bool can_stall;
+ bool cdrom;
char *transport_parm;
char *protocol_parm;
*
* If use_dma is disabled, pio will be used instead.
*/
-static int use_dma = 0;
+static bool use_dma = 0;
module_param(use_dma, bool, 0644);
/*
* Some gadget drivers work better with the dma support here than others.
* These two parameters let you use PIO or more aggressive DMA.
*/
-static int use_dma = 1;
-static int use_dma_chaining = 0;
+static bool use_dma = 1;
+static bool use_dma_chaining = 0;
/* "modprobe net2280 use_dma=n" etc */
module_param (use_dma, bool, S_IRUGO);
* USB suspend requests will be ignored. This is acceptable for
* self-powered devices
*/
-static int enable_suspend = 0;
+static bool enable_suspend = 0;
/* "modprobe net2280 enable_suspend=1" etc */
module_param (enable_suspend, bool, S_IRUGO);
MODULE_PARM_DESC (fifo_mode, "endpoint configuration");
#ifdef USE_DMA
-static unsigned use_dma = 1;
+static bool use_dma = 1;
/* "modprobe omap_udc use_dma=y", or else as a kernel
* boot parameter "omap_udc:use_dma=y"
static const char ep0_string[] = "ep0in";
static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */
struct pch_udc_dev *pch_udc; /* pointer to device object */
-static int speed_fs;
+static bool speed_fs;
module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-static int use_acm = true;
+static bool use_acm = true;
module_param(use_acm, bool, 0);
MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes");
-static int use_obex = false;
+static bool use_obex = false;
module_param(use_obex, bool, 0);
MODULE_PARM_DESC(use_obex, "Use CDC OBEX, default=no");
* work better with hosts where config changes are problematic or
* controllers (like original superh) that only support one config.
*/
-static int loopdefault = 0;
+static bool loopdefault = 0;
module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
/* for flakey hardware, ignore overcurrent indicators */
-static int ignore_oc = 0;
+static bool ignore_oc = 0;
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
/* Some boards misreport power switching/overcurrent */
-static int distrust_firmware = 1;
+static bool distrust_firmware = 1;
module_param (distrust_firmware, bool, 0);
MODULE_PARM_DESC (distrust_firmware,
"true to distrust firmware power/overcurrent setup");
/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
-static int no_handshake = 0;
+static bool no_handshake = 0;
module_param (no_handshake, bool, 0);
MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
MODULE_PARM_DESC(park, "park setting; 1-3 back-to-back async packets");
/* For flakey hardware, ignore overcurrent indicators */
-static int ignore_oc;
+static bool ignore_oc;
module_param(ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC(ignore_oc, "ignore bogus hardware overcurrent indications");
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
INT_MODULE_PARM(testing, 0);
/* Some boards misreport power switching/overcurrent*/
-static int distrust_firmware = 1;
+static bool distrust_firmware = 1;
module_param(distrust_firmware, bool, 0);
MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
"t setup");
#define DRIVER_DESC "USB Universal Host Controller Interface driver"
/* for flakey hardware, ignore overcurrent indicators */
-static int ignore_oc;
+static bool ignore_oc;
module_param(ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC(ignore_oc, "ignore hardware overcurrent indications");
MODULE_DESCRIPTION("FTDI ELAN driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
-static int distrust_firmware = 1;
+static bool distrust_firmware = 1;
module_param(distrust_firmware, bool, 0);
MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
"t setup");
/* Module parameters */
static DEFINE_MUTEX(iowarrior_mutex);
-static int debug = 0;
+static bool debug = 0;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
* So this module parameter lets the heuristic be disabled. When using
* gadgetfs, the heuristic will probably need to be disabled.
*/
-static int cppi_rx_rndis = 1;
+static bool cppi_rx_rndis = 1;
module_param(cppi_rx_rndis, bool, 0);
MODULE_PARM_DESC(cppi_rx_rndis, "enable/disable RX RNDIS heuristic");
EXPORT_SYMBOL_GPL(musb_interrupt);
#ifndef CONFIG_MUSB_PIO_ONLY
-static int __initdata use_dma = 1;
+static bool __initdata use_dma = 1;
/* "modprobe ... use_dma=0" etc */
module_param(use_dma, bool, 0);
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static int debug;
+static bool debug;
/* Vendor and Product ID */
#define AIRCABLE_VID 0x16CA
#include <linux/mutex.h>
#include <linux/spinlock.h>
-static int debug;
+static bool debug;
/*
* Version information
*/
#include <linux/usb/serial.h>
#include "belkin_sa.h"
-static int debug;
+static bool debug;
/*
* Version Information
#define CH341_NBREAK_BITS_REG2 0x40
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x4348, 0x5523) },
static int cp210x_startup(struct usb_serial *);
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
#define CYBERJACK_LOCAL_BUF_SIZE 32
-static int debug;
+static bool debug;
/*
* Version Information
#include "cypress_m8.h"
-static int debug;
-static int stats;
+static bool debug;
+static bool stats;
static int interval;
-static int unstable_bauds;
+static bool unstable_bauds;
/*
* Version Information
/* Statics */
-static int debug;
+static bool debug;
static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static int debug;
+static bool debug;
/*
* Version Information
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
-static int debug;
+static bool debug;
static __u16 vendor = FTDI_VID;
static __u16 product;
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1404, 0xcddc) },
static int initial_mode = 1;
/* debug flag */
-static int debug;
+static bool debug;
#define GARMIN_VENDOR_ID 0x091E
};
/* local variables */
-static int debug;
+static bool debug;
static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
static unsigned char OperationalMinorVersion;
static unsigned short OperationalBuildNumber;
-static int debug;
+static bool debug;
static int closing_wait = EDGE_CLOSING_WAIT;
-static int ignore_cpu_rev;
+static bool ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
#define DRIVER_DESC "USB PocketPC PDA driver"
static __u16 product, vendor;
-static int debug;
+static bool debug;
static int connect_retries = KP_RETRIES;
static int initial_wait;
.no_dynamic_id = 1,
};
-static int debug;
+static bool debug;
static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
{
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>"
#define DRIVER_DESC "USB IR Dongle driver"
-static int debug;
+static bool debug;
/* if overridden by the user, then use their value for the size of the read and
* write urbs */
#ifdef CONFIG_USB_SERIAL_DEBUG
-static int debug = 1;
+static bool debug = 1;
#else
-static int debug;
+static bool debug;
#endif
/*
static int cdmode = 1;
static int iuu_cardin;
static int iuu_cardout;
-static int xmas;
+static bool xmas;
static int vcc_default = 5;
static void read_rxcmd_callback(struct urb *urb);
#include <linux/usb/serial.h>
#include "keyspan.h"
-static int debug;
+static bool debug;
/*
* Version Information
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static int debug;
+static bool debug;
/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
#include <linux/usb/serial.h>
#include "kl5kusb105.h"
-static int debug;
+static bool debug;
/*
* Version Information
#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>"
#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver"
-static int debug;
+static bool debug;
/*
* Function prototypes
struct urb *write_urb_pool[NUM_URBS];
};
-static int debug;
+static bool debug;
static struct usb_serial_driver moschip7720_2port_driver;
};
-static int debug;
+static bool debug;
/*
* mos7840_set_reg_sync
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */
#include <linux/usb.h>
#include <linux/usb/serial.h>
-static int debug;
+static bool debug;
/*
* Version Information
* an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */
#define DRIVER_DESC "Opticon USB barcode to serial driver (1D)"
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x065a, 0x0009) },
#endif
};
-static int debug;
+static bool debug;
/* per port private data */
.no_dynamic_id = 1,
};
-static int debug;
+static bool debug;
/* requests */
#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00)
*/
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
-static int debug;
+static bool debug;
#define PL2303_CLOSING_WAIT (30*HZ)
#define DRIVER_AUTHOR "Qualcomm Inc"
#define DRIVER_DESC "Qualcomm USB Serial driver"
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */
#define CONFIG_USB_SERIAL_SAFE_PADDED 0
#endif
-static int debug;
-static int safe = 1;
-static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
+static bool debug;
+static bool safe = 1;
+static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED;
#define DRIVER_VERSION "v0.1"
#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>"
allocations > PAGE_SIZE and the number of packets in a page
is an integer 512 is the largest possible packet on EHCI */
-static int debug;
-static int nmea;
+static bool debug;
+static bool nmea;
/* Used in interface blacklisting */
struct sierra_iface_info {
#define DRIVER_VERSION "v0.10"
#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
-static int debug;
+static bool debug;
#define SPCP8x5_007_VID 0x04FC
#define SPCP8x5_007_PID 0x0201
#define FULLPWRBIT 0x00000080
#define NEXT_BOARD_POWER_BIT 0x00000004
-static int debug;
+static bool debug;
/* Version Information */
#define DRIVER_VERSION "v0.1"
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
-static int debug;
+static bool debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x05e0, 0x0600) },
/* Data */
/* module parameters */
-static int debug;
+static bool debug;
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
static unsigned int vendor_3410_count;
drivers depend on it.
*/
-static int debug;
+static bool debug;
/* initially all NULL */
static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
static DEFINE_MUTEX(table_lock);
#include <linux/serial.h>
#include "usb-wwan.h"
-static int debug;
+static bool debug;
void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
{
const struct usb_device_id *id);
/* Parameters that may be passed into the module. */
-static int debug;
+static bool debug;
static __u16 vendor;
static __u16 product;
#include <linux/ihex.h>
#include "whiteheat.h" /* WhiteHEAT specific commands */
-static int debug;
+static bool debug;
#ifndef CMSPAR
#define CMSPAR 0
.fb_sync = atyfb_sync,
};
-static int noaccel;
+static bool noaccel;
#ifdef CONFIG_MTRR
-static int nomtrr;
+static bool nomtrr;
#endif
static int vram;
static int pll;
static char *mode_option;
static char *monitor_layout;
-static int noaccel = 0;
+static bool noaccel = 0;
static int default_dynclk = -2;
-static int nomodeset = 0;
-static int ignore_edid = 0;
-static int mirror = 0;
+static bool nomodeset = 0;
+static bool ignore_edid = 0;
+static bool mirror = 0;
static int panel_yres = 0;
-static int force_dfp = 0;
-static int force_measure_pll = 0;
+static bool force_dfp = 0;
+static bool force_measure_pll = 0;
#ifdef CONFIG_MTRR
-static int nomtrr = 0;
+static bool nomtrr = 0;
#endif
-static int force_sleep;
-static int ignore_devlist;
+static bool force_sleep;
+static bool ignore_devlist;
#ifdef CONFIG_PMAC_BACKLIGHT
static int backlight = 1;
#else
void (*unmap)(struct fb_info *info);
};
-static int noaccel __devinitdata;
+static bool noaccel __devinitdata;
static char *mode_option __devinitdata = "640x480@60";
/****************************************************************************/
/* Don't assume that tty1 will be the initial current console. */
static int release_io_port = 0;
static int release_io_ports = 0;
-static int nologo = 0;
+static bool nologo = 0;
/* -------------------------------------------------------------------------
*
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DEVICE_TABLE(pci, intelfb_pci_table);
-static int accel = 1;
+static bool accel = 1;
static int vram = 4;
-static int hwcursor = 0;
-static int mtrr = 1;
-static int fixed = 0;
-static int noinit = 0;
-static int noregister = 0;
-static int probeonly = 0;
-static int idonly = 0;
+static bool hwcursor = 0;
+static bool mtrr = 1;
+static bool fixed = 0;
+static bool noinit = 0;
+static bool noregister = 0;
+static bool probeonly = 0;
+static bool idonly = 0;
static int bailearly = 0;
static int voffset = 48;
static char *mode = NULL;
#include <asm/bootinfo.h>
#endif
-static int nologo;
+static bool nologo;
module_param(nologo, bool, 0);
MODULE_PARM_DESC(nologo, "Disables startup logo");
/* --------------------------------------------------------------------- */
-static int internal;
-static int external;
-static int libretto;
-static int nostretch;
-static int nopciburst;
+static bool internal;
+static bool external;
+static bool libretto;
+static bool nostretch;
+static bool nopciburst;
static char *mode_option __devinitdata = NULL;
#ifdef MODULE
static unsigned int def_mirror;
#ifdef CONFIG_FB_OMAP_MANUAL_UPDATE
-static int manual_update = 1;
+static bool manual_update = 1;
#else
-static int manual_update;
+static bool manual_update;
#endif
static struct platform_device *fbdev_pdev;
MODULE_PARM_DESC(def_disp, "default display name");
#ifdef DEBUG
-unsigned int dss_debug;
+bool dss_debug;
module_param_named(debug, dss_debug, bool, 0644);
#endif
static struct platform_device *dsi_pdev_map[MAX_NUM_DSI];
#ifdef DEBUG
-static unsigned int dsi_perf;
-module_param_named(dsi_perf, dsi_perf, bool, 0644);
+static bool dsi_perf;
+module_param(dsi_perf, bool, 0644);
#endif
static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dsidev)
#endif
#ifdef DEBUG
-extern unsigned int dss_debug;
+extern bool dss_debug;
#ifdef DSS_SUBSYS_NAME
#define DSSDBG(format, ...) \
if (dss_debug) \
static char *def_mode;
static char *def_vram;
-static int def_vrfb;
+static bool def_vrfb;
static int def_rotate;
-static int def_mirror;
+static bool def_mirror;
static bool auto_update;
static unsigned int auto_update_freq;
module_param(auto_update, bool, 0);
module_param(auto_update_freq, uint, 0644);
#ifdef DEBUG
-unsigned int omapfb_debug;
+bool omapfb_debug;
module_param_named(debug, omapfb_debug, bool, 0644);
-static unsigned int omapfb_test_pattern;
+static bool omapfb_test_pattern;
module_param_named(test, omapfb_test_pattern, bool, 0644);
#endif
#include <video/omapdss.h>
#ifdef DEBUG
-extern unsigned int omapfb_debug;
+extern bool omapfb_debug;
#define DBG(format, ...) \
do { \
if (omapfb_debug) \
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
-static int noaccel __devinitdata;
+static bool lowhsync;
+static bool lowvsync;
+static bool noaccel __devinitdata;
/* mtrr option */
#ifdef CONFIG_MTRR
-static int nomtrr __devinitdata;
+static bool nomtrr __devinitdata;
#endif
/*
*/
static int hwcursor = 1;
static char *mode_option __devinitdata;
-static int noaccel __devinitdata;
+static bool noaccel __devinitdata;
/* mtrr option */
#ifdef CONFIG_MTRR
-static int nomtrr __devinitdata;
+static bool nomtrr __devinitdata;
#endif
/*
/* command line data, set in rivafb_setup() */
static int flatpanel __devinitdata = -1; /* Autodetect later */
static int forceCRTC __devinitdata = -1;
-static int noaccel __devinitdata = 0;
+static bool noaccel __devinitdata = 0;
#ifdef CONFIG_MTRR
-static int nomtrr __devinitdata = 0;
+static bool nomtrr __devinitdata = 0;
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
static int backlight __devinitdata = 1;
#endif
static char *mode_option __devinitdata = NULL;
-static int strictmode = 0;
+static bool strictmode = 0;
static struct fb_fix_screeninfo __devinitdata rivafb_fix = {
.type = FB_TYPE_PACKED_PIXELS,
MODULE_DEVICE_TABLE(usb, id_table);
/* module options */
-static int console; /* Optionally allow fbcon to consume first framebuffer */
-static int fb_defio = true; /* Optionally enable fb_defio mmap support */
+static bool console; /* Optionally allow fbcon to consume first framebuffer */
+static bool fb_defio = true; /* Optionally enable fb_defio mmap support */
/* ufx keeps a list of urbs for efficient bulk transfers */
static void ufx_urb_completion(struct urb *urb);
/* initialized by setup */
-static int vgapass; /* enable VGA passthrough cable */
+static bool vgapass; /* enable VGA passthrough cable */
static int mem; /* mem size in MB, 0 = autodetect */
-static int clipping = 1; /* use clipping (slower, safer) */
+static bool clipping = 1; /* use clipping (slower, safer) */
static int gfxclk; /* force FBI freq in Mhz . Dangerous */
-static int slowpci; /* slow PCI settings */
+static bool slowpci; /* slow PCI settings */
/*
Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
static int hwcursor = 1;
static char *mode_option __devinitdata;
/* mtrr option */
-static int nomtrr __devinitdata;
+static bool nomtrr __devinitdata;
/* -------------------------------------------------------------------------
* Hardware-specific funcions
MODULE_DEVICE_TABLE(usb, id_table);
/* module options */
-static int console = 1; /* Allow fbcon to open framebuffer */
-static int fb_defio = 1; /* Detect mmap writes using page faults */
-static int shadow = 1; /* Optionally disable shadow framebuffer */
+static bool console = 1; /* Allow fbcon to open framebuffer */
+static bool fb_defio = 1; /* Detect mmap writes using page faults */
+static bool shadow = 1; /* Optionally disable shadow framebuffer */
/* dlfb keeps a list of urbs for efficient bulk transfers */
static void dlfb_urb_completion(struct urb *urb);
};
static int mtrr __devinitdata = 3; /* enable mtrr by default */
-static int blank = 1; /* enable blanking by default */
+static bool blank = 1; /* enable blanking by default */
static int ypan = 1; /* 0: scroll, 1: ypan, 2: ywrap */
static bool pmi_setpal __devinitdata = true; /* use PMI for palette changes */
-static int nocrtc __devinitdata; /* ignore CRTC settings */
-static int noedid __devinitdata; /* don't try DDC transfers */
+static bool nocrtc __devinitdata; /* ignore CRTC settings */
+static bool noedid __devinitdata; /* don't try DDC transfers */
static int vram_remap __devinitdata; /* set amt. of memory to be used */
static int vram_total __devinitdata; /* set total amount of memory */
static u16 maxclk __devinitdata; /* maximum pixel clock */
.accel = FB_ACCEL_NONE,
};
-static int vfb_enable __initdata = 0; /* disabled by default */
+static bool vfb_enable __initdata = 0; /* disabled by default */
module_param(vfb_enable, bool, 0);
static int vfb_check_var(struct fb_var_screeninfo *var,
"Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
" (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
-static int nowayout = WATCHDOG_NOWAYOUT;
+static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0444);
MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
MODULE_PARM_DESC(timeout,
"Watchdog timeout in ticks. (0<timeout<65536, default=65535)");
-static int reset = 1;
+static bool reset = 1;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset,
"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
#include "conf_space.h"
#include "conf_space_quirks.h"
-static int permissive;
+static bool permissive;
module_param(permissive, bool, 0644);
/* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
#define INVALID_EVTCHN_IRQ (-1)
struct workqueue_struct *xen_pcibk_wq;
-static int __read_mostly passthrough;
+static bool __read_mostly passthrough;
module_param(passthrough, bool, S_IRUGO);
MODULE_PARM_DESC(passthrough,
"Option to specify how to export PCI topology to guest:\n"\
* Local NSM state
*/
u32 __read_mostly nsm_local_state;
-int __read_mostly nsm_use_hostnames;
+bool __read_mostly nsm_use_hostnames;
static inline struct sockaddr *nsm_addr(const struct nsm_handle *nsm)
{
/*
* Turn off NFSv4 uid/gid mapping when using AUTH_SYS
*/
-static int nfs4_disable_idmapping = 1;
+static bool nfs4_disable_idmapping = true;
/*
* RPC cruft for NFS
#define NFS_64_BIT_INODE_NUMBERS_ENABLED 1
/* Default is to see 64-bit inode numbers */
-static int enable_ino64 = NFS_64_BIT_INODE_NUMBERS_ENABLED;
+static bool enable_ino64 = NFS_64_BIT_INODE_NUMBERS_ENABLED;
static void nfs_invalidate_inode(struct inode *);
static int nfs_update_inode(struct inode *, struct nfs_fattr *);
extern u8 acpi_gbl_use_default_register_widths;
extern acpi_name acpi_gbl_trace_method_name;
extern u32 acpi_gbl_trace_flags;
-extern u32 acpi_gbl_enable_aml_debug_object;
+extern bool acpi_gbl_enable_aml_debug_object;
extern u8 acpi_gbl_copy_dsdt_locally;
extern u8 acpi_gbl_truncate_io_addresses;
extern u8 acpi_gbl_disable_auto_repair;
#ifdef __KERNEL__
-extern int hest_disable;
+extern bool hest_disable;
extern int erst_disable;
#ifdef CONFIG_ACPI_APEI_GHES
-extern int ghes_disable;
+extern bool ghes_disable;
#else
#define ghes_disable 1
#endif
char *console_options, char *braille_options);
extern int braille_unregister_console(struct console *);
extern void console_sysfs_notify(void);
-extern int console_suspend_enabled;
+extern bool console_suspend_enabled;
/* Suspend and resume console messages over PM events */
extern void suspend_console(void);
#endif
extern int nlmsvc_grace_period;
extern unsigned long nlmsvc_timeout;
-extern int nsm_use_hostnames;
+extern bool nsm_use_hostnames;
extern u32 nsm_local_state;
/*
}
/* Module parameter */
-extern int mmc_assume_removable;
+extern bool mmc_assume_removable;
static inline int mmc_card_is_removable(struct mmc_host *host)
{
/* Control parameters settable through module/boot flags */
extern enum audit_mode aa_g_audit;
-extern int aa_g_audit_header;
-extern int aa_g_debug;
-extern int aa_g_lock_policy;
-extern int aa_g_logsyscall;
-extern int aa_g_paranoid_load;
+extern bool aa_g_audit_header;
+extern bool aa_g_debug;
+extern bool aa_g_lock_policy;
+extern bool aa_g_logsyscall;
+extern bool aa_g_paranoid_load;
extern unsigned int aa_g_path_max;
/*
&aa_g_profile_mode, S_IRUSR | S_IWUSR);
/* Debug mode */
-int aa_g_debug;
+bool aa_g_debug;
module_param_named(debug, aa_g_debug, aabool, S_IRUSR | S_IWUSR);
/* Audit mode */
/* Determines if audit header is included in audited messages. This
* provides more context if the audit daemon is not running
*/
-int aa_g_audit_header = 1;
+bool aa_g_audit_header = 1;
module_param_named(audit_header, aa_g_audit_header, aabool,
S_IRUSR | S_IWUSR);
* TODO: add in at boot loading of policy, which is the only way to
* load policy, if lock_policy is set
*/
-int aa_g_lock_policy;
+bool aa_g_lock_policy;
module_param_named(lock_policy, aa_g_lock_policy, aalockpolicy,
S_IRUSR | S_IWUSR);
/* Syscall logging mode */
-int aa_g_logsyscall;
+bool aa_g_logsyscall;
module_param_named(logsyscall, aa_g_logsyscall, aabool, S_IRUSR | S_IWUSR);
/* Maximum pathname length before accesses will start getting rejected */
/* Determines how paranoid loading of policy is and how much verification
* on the loaded policy is done.
*/
-int aa_g_paranoid_load = 1;
+bool aa_g_paranoid_load = 1;
module_param_named(paranoid_load, aa_g_paranoid_load, aabool,
S_IRUSR | S_IWUSR);
/* Boot time disable flag */
-static unsigned int apparmor_enabled = CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE;
+static bool apparmor_enabled = CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE;
module_param_named(enabled, apparmor_enabled, aabool, S_IRUSR);
static int __init apparmor_enabled_setup(char *str)
#include <linux/iommu.h>
#include <linux/intel-iommu.h>
-static int allow_unsafe_assigned_interrupts;
+static bool allow_unsafe_assigned_interrupts;
module_param_named(allow_unsafe_assigned_interrupts,
allow_unsafe_assigned_interrupts, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(allow_unsafe_assigned_interrupts,
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff