scsi: g_NCR5380: Use probe_irq_*() for IRQ probing

Use standard probe_irq_on() and probe_irq_off() functions instead of own
implementation.  This prevents warning messages like this in the kernel
log: genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080
(i8042)

Move the IRQ trigger code from NCR5380 to g_NCR5380 where it is used.

Also clear interrupt flag before and after the probe.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d849ffa378b1ef19f80af760d53ae29774007e7c..4f5ca794bb71507a90879af23f0f4ea998fea9ec 100644 (file)
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -97,9 +97,6 @@
  * and macros and include this file in your driver.
  *
  * These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
- *
  * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
  * for commands that return with a CHECK CONDITION status.
  *
@@ -127,9 +124,7 @@
  * NCR5380_dma_residual   - residual byte count
  *
  * The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID.  If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used.
+ * after setting the appropriate host specific fields and ID.
  */
 
 #ifndef NCR5380_io_delay
@@ -351,76 +346,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
 }
 #endif
 
-
-static int probe_irq;
-
-/**
- * probe_intr  -       helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
- *
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
- */
-
-static irqreturn_t probe_intr(int irq, void *dev_id)
-{
-       probe_irq = irq;
-       return IRQ_HANDLED;
-}
-
-/**
- * NCR5380_probe_irq   -       find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
- *
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- */
-
-static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
-                                               int possible)
-{
-       struct NCR5380_hostdata *hostdata = shost_priv(instance);
-       unsigned long timeout;
-       int trying_irqs, i, mask;
-
-       for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
-               if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
-                       trying_irqs |= mask;
-
-       timeout = jiffies + msecs_to_jiffies(250);
-       probe_irq = NO_IRQ;
-
-       /*
-        * A interrupt is triggered whenever BSY = false, SEL = true
-        * and a bit set in the SELECT_ENABLE_REG is asserted on the
-        * SCSI bus.
-        *
-        * Note that the bus is only driven when the phase control signals
-        * (I/O, C/D, and MSG) match those in the TCR, so we must reset that
-        * to zero.
-        */
-
-       NCR5380_write(TARGET_COMMAND_REG, 0);
-       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-       NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
-       NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
-
-       while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
-               schedule_timeout_uninterruptible(1);
-
-       NCR5380_write(SELECT_ENABLE_REG, 0);
-       NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-       for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
-               if (trying_irqs & mask)
-                       free_irq(i, NULL);
-
-       return probe_irq;
-}
-
 /**
  * NCR58380_info - report driver and host information
  * @instance: relevant scsi host instance

diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 3c6ce5434449677026551e8d1acd5c447785bb8e..51a3567a6fb2a36a3eb44fbf94edf5536e333fe4 100644 (file)
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -199,16 +199,6 @@
 
 #define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
 
-/*
- * These are "special" values for the irq and dma_channel fields of the 
- * Scsi_Host structure
- */
-
-#define DMA_NONE       255
-#define IRQ_AUTO       254
-#define DMA_AUTO       254
-#define PORT_AUTO      0xffff  /* autoprobe io port for 53c400a */
-
 #ifndef NO_IRQ
 #define NO_IRQ         0
 #endif
@@ -290,7 +280,6 @@ static void NCR5380_print(struct Scsi_Host *instance);
 #define NCR5380_dprint_phase(flg, arg) do {} while (0)
 #endif
 
-static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
 static int NCR5380_init(struct Scsi_Host *instance, int flags);
 static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
 static void NCR5380_exit(struct Scsi_Host *instance);

diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 76e37455480e003266bf4c972f41ab9e6e55ff55..6d245a7b9363348d6dc8c520f585eb33870edace 100644 (file)
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -67,6 +67,56 @@ MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC31
 MODULE_ALIAS("g_NCR5380_mmio");
 MODULE_LICENSE("GPL");
 
+static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
+{
+       struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+       /*
+        * An interrupt is triggered whenever BSY = false, SEL = true
+        * and a bit set in the SELECT_ENABLE_REG is asserted on the
+        * SCSI bus.
+        *
+        * Note that the bus is only driven when the phase control signals
+        * (I/O, C/D, and MSG) match those in the TCR.
+        */
+       NCR5380_write(TARGET_COMMAND_REG,
+                     PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+       NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+       NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
+       NCR5380_write(INITIATOR_COMMAND_REG,
+                     ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
+
+       msleep(1);
+
+       NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+       NCR5380_write(SELECT_ENABLE_REG, 0);
+       NCR5380_write(TARGET_COMMAND_REG, 0);
+}
+
+/**
+ * g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
+ * @instance: SCSI host instance
+ *
+ * Autoprobe for the IRQ line used by the card by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
+ */
+
+static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
+{
+       struct NCR5380_hostdata *hostdata = shost_priv(instance);
+       int irq_mask, irq;
+
+       NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+       irq_mask = probe_irq_on();
+       g_NCR5380_trigger_irq(instance);
+       irq = probe_irq_off(irq_mask);
+       NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+       if (irq <= 0)
+               return NO_IRQ;
+       return irq;
+}
+
 /*
  * Configure I/O address of 53C400A or DTC436 by writing magic numbers
  * to ports 0x779 and 0x379.
@@ -272,7 +322,7 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
        if (irq != IRQ_AUTO)
                instance->irq = irq;
        else
-               instance->irq = NCR5380_probe_irq(instance, 0xffff);
+               instance->irq = g_NCR5380_probe_irq(instance);
 
        /* Compatibility with documented NCR5380 kernel parameters */
        if (instance->irq == 255)

diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 3ce5b65ccb00b618012ef0825390a6a098950cd6..81b22d989648b0107f6c0f3128cc25348a88e775 100644 (file)
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -51,4 +51,6 @@
 #define BOARD_DTC3181E 3
 #define BOARD_HP_C2502 4
 
+#define IRQ_AUTO       254
+
 #endif /* GENERIC_NCR5380_H */