}
static int bnx2x_emac_enable(struct link_params *params,
- struct link_vars *vars, u8 lb)
+ struct link_vars *vars, u8 lb)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
params->phy[INT_PHY].def_md_devad);
}
+static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
+ struct link_params *params, u16 *ieee_fc)
+{
+ struct bnx2x *bp = params->bp;
+ *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
+ /**
+ * resolve pause mode and advertisement Please refer to Table
+ * 28B-3 of the 802.3ab-1999 spec
+ */
+
+ switch (phy->req_flow_ctrl) {
+ case BNX2X_FLOW_CTRL_AUTO:
+ if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH)
+ *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ else
+ *ieee_fc |=
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ break;
+
+ case BNX2X_FLOW_CTRL_TX:
+ *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
+ break;
+
+ case BNX2X_FLOW_CTRL_RX:
+ case BNX2X_FLOW_CTRL_BOTH:
+ *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
+ break;
+
+ case BNX2X_FLOW_CTRL_NONE:
+ default:
+ *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
+ break;
+ }
+ DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
+}
+
+static void set_phy_vars(struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u8 actual_phy_idx, phy_index, link_cfg_idx;
+ u8 phy_config_swapped = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+ for (phy_index = INT_PHY; phy_index < params->num_phys;
+ phy_index++) {
+ link_cfg_idx = LINK_CONFIG_IDX(phy_index);
+ actual_phy_idx = phy_index;
+ if (phy_config_swapped) {
+ if (phy_index == EXT_PHY1)
+ actual_phy_idx = EXT_PHY2;
+ else if (phy_index == EXT_PHY2)
+ actual_phy_idx = EXT_PHY1;
+ }
+ params->phy[actual_phy_idx].req_flow_ctrl =
+ params->req_flow_ctrl[link_cfg_idx];
+
+ params->phy[actual_phy_idx].req_line_speed =
+ params->req_line_speed[link_cfg_idx];
+
+ params->phy[actual_phy_idx].speed_cap_mask =
+ params->speed_cap_mask[link_cfg_idx];
+ params->phy[actual_phy_idx].req_duplex =
+ params->req_duplex[link_cfg_idx];
+
+ if (params->req_line_speed[link_cfg_idx] ==
+ SPEED_AUTO_NEG)
+ vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
+
+ DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"
+ " speed_cap_mask %x\n",
+ params->phy[actual_phy_idx].req_flow_ctrl,
+ params->phy[actual_phy_idx].req_line_speed,
+ params->phy[actual_phy_idx].speed_cap_mask);
+ }
+}
+
+static void bnx2x_ext_phy_set_pause(struct link_params *params,
+ struct bnx2x_phy *phy,
+ struct link_vars *vars)
+{
+ u16 val;
+ struct bnx2x *bp = params->bp;
+ /* read modify write pause advertizing */
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val);
+
+ val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
+
+ /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
+ bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
+ if ((vars->ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
+ val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
+ }
+ if ((vars->ieee_fc &
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
+ MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
+ val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
+ }
+ DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val);
+ bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
+}
+
+static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
+{ /* LD LP */
+ switch (pause_result) { /* ASYM P ASYM P */
+ case 0xb: /* 1 0 1 1 */
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
+ break;
+
+ case 0xe: /* 1 1 1 0 */
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
+ break;
+
+ case 0x5: /* 0 1 0 1 */
+ case 0x7: /* 0 1 1 1 */
+ case 0xd: /* 1 1 0 1 */
+ case 0xf: /* 1 1 1 1 */
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
+ break;
+
+ default:
+ break;
+ }
+ if (pause_result & (1<<0))
+ vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
+ if (pause_result & (1<<1))
+ vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;
+}
+
+static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ u16 ld_pause; /* local */
+ u16 lp_pause; /* link partner */
+ u16 pause_result;
+ u8 ret = 0;
+ /* read twice */
+
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+
+ if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO)
+ vars->flow_ctrl = phy->req_flow_ctrl;
+ else if (phy->req_line_speed != SPEED_AUTO_NEG)
+ vars->flow_ctrl = params->req_fc_auto_adv;
+ else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
+ ret = 1;
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_ADV_PAUSE, &ld_pause);
+ bnx2x_cl45_read(bp, phy,
+ MDIO_AN_DEVAD,
+ MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
+ pause_result = (ld_pause &
+ MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
+ pause_result |= (lp_pause &
+ MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
+ DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
+ pause_result);
+ bnx2x_pause_resolve(vars, pause_result);
+ }
+ return ret;
+}
void bnx2x_link_status_update(struct link_params *params,
struct link_vars *vars)
{
}
-static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x_phy *phy,
- struct link_params *params)
+static void bnx2x_set_brcm_cl37_advertisement(struct bnx2x_phy *phy,
+ struct link_params *params)
{
struct bnx2x *bp = params->bp;
u16 val = 0;
MDIO_OVER_1G_UP3, 0x400);
}
-static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
- struct link_params *params, u16 *ieee_fc)
-{
- struct bnx2x *bp = params->bp;
- *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
- /*
- * Resolve pause mode and advertisement.
- * Please refer to Table 28B-3 of the 802.3ab-1999 spec
- */
-
- switch (phy->req_flow_ctrl) {
- case BNX2X_FLOW_CTRL_AUTO:
- if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH)
- *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- else
- *ieee_fc |=
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- break;
- case BNX2X_FLOW_CTRL_TX:
- *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
- break;
-
- case BNX2X_FLOW_CTRL_RX:
- case BNX2X_FLOW_CTRL_BOTH:
- *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
- break;
-
- case BNX2X_FLOW_CTRL_NONE:
- default:
- *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
- break;
- }
- DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
-}
-
-static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x_phy *phy,
- struct link_params *params,
- u16 ieee_fc)
+static void bnx2x_set_ieee_aneg_advertisement(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u16 ieee_fc)
{
struct bnx2x *bp = params->bp;
u16 val;
* link management
*/
-static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
-{ /* LD LP */
- switch (pause_result) { /* ASYM P ASYM P */
- case 0xb: /* 1 0 1 1 */
- vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
- break;
-
- case 0xe: /* 1 1 1 0 */
- vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
- break;
-
- case 0x5: /* 0 1 0 1 */
- case 0x7: /* 0 1 1 1 */
- case 0xd: /* 1 1 0 1 */
- case 0xf: /* 1 1 1 1 */
- vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
- break;
-
- default:
- break;
- }
- if (pause_result & (1<<0))
- vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE;
- if (pause_result & (1<<1))
- vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE;
-}
-
static int bnx2x_direct_parallel_detect_used(struct bnx2x_phy *phy,
struct link_params *params)
{
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u16 rx_status, ustat_val, cl37_fsm_recieved;
+ u16 rx_status, ustat_val, cl37_fsm_received;
DP(NETIF_MSG_LINK, "bnx2x_check_fallback_to_cl37\n");
/* Step 1: Make sure signal is detected */
CL22_RD_OVER_CL45(bp, phy,
CL22_RD_OVER_CL45(bp, phy,
MDIO_REG_BANK_REMOTE_PHY,
MDIO_REMOTE_PHY_MISC_RX_STATUS,
- &cl37_fsm_recieved);
- if ((cl37_fsm_recieved &
+ &cl37_fsm_received);
+ if ((cl37_fsm_received &
(MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
(MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
DP(NETIF_MSG_LINK, "No CL37 FSM were received. "
"misc_rx_status(0x8330) = 0x%x\n",
- cl37_fsm_recieved);
+ cl37_fsm_received);
return;
}
/*
DP(NETIF_MSG_LINK, "not SGMII, AN\n");
/* AN enabled */
- bnx2x_set_brcm_cl37_advertisment(phy, params);
+ bnx2x_set_brcm_cl37_advertisement(phy, params);
/* program duplex & pause advertisement (for aneg) */
- bnx2x_set_ieee_aneg_advertisment(phy, params,
- vars->ieee_fc);
+ bnx2x_set_ieee_aneg_advertisement(phy, params,
+ vars->ieee_fc);
/* enable autoneg */
bnx2x_set_autoneg(phy, params, vars, enable_cl73);
if (phy_index == EXT_PHY2 &&
(bnx2x_phy_selection(params) ==
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
- DP(NETIF_MSG_LINK, "Ignoring second phy\n");
+ DP(NETIF_MSG_LINK, "Not initializing"
+ " second phy\n");
continue;
}
params->phy[phy_index].config_init(
* Step 1:
* Check external link change only for external phys, and apply
* priority selection between them in case the link on both phys
- * is up. Note that the instead of the common vars, a temporary
+ * is up. Note that instead of the common vars, a temporary
* vars argument is used since each phy may have different link/
* speed/duplex result
*/
}
/*
* Link is up only if both local phy and external phy (in case of
- * non-direct board) are up
+ * non-direct board) are up and no fault detected on active PHY.
*/
vars->link_up = (vars->phy_link_up &&
(ext_phy_link_up ||
phy->ver_addr);
}
-static void bnx2x_ext_phy_set_pause(struct link_params *params,
- struct bnx2x_phy *phy,
- struct link_vars *vars)
-{
- u16 val;
- struct bnx2x *bp = params->bp;
- /* read modify write pause advertizing */
- bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val);
-
- val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH;
-
- /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */
- bnx2x_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc);
- if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) ==
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) {
- val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC;
- }
- if ((vars->ieee_fc &
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) ==
- MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
- val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
- }
- DP(NETIF_MSG_LINK, "Ext phy AN advertize 0x%x\n", val);
- bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
-}
-
-static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
- struct link_params *params,
- struct link_vars *vars)
-{
- struct bnx2x *bp = params->bp;
- u16 ld_pause; /* local */
- u16 lp_pause; /* link partner */
- u16 pause_result;
- u8 ret = 0;
- /* read twice */
-
- vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
-
- if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO)
- vars->flow_ctrl = phy->req_flow_ctrl;
- else if (phy->req_line_speed != SPEED_AUTO_NEG)
- vars->flow_ctrl = params->req_fc_auto_adv;
- else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) {
- ret = 1;
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_ADV_PAUSE, &ld_pause);
- bnx2x_cl45_read(bp, phy,
- MDIO_AN_DEVAD,
- MDIO_AN_REG_LP_AUTO_NEG, &lp_pause);
- pause_result = (ld_pause &
- MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
- pause_result |= (lp_pause &
- MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
- DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n",
- pause_result);
- bnx2x_pause_resolve(vars, pause_result);
- }
- return ret;
-}
-
static void bnx2x_ext_phy_10G_an_resolve(struct bnx2x *bp,
struct bnx2x_phy *phy,
struct link_vars *vars)
params,
SFP_EEPROM_FC_TX_TECH_ADDR,
1,
- &copper_module_type) !=
- 0) {
+ &copper_module_type) != 0) {
DP(NETIF_MSG_LINK,
"Failed to read copper-cable-type"
" from SFP+ EEPROM\n");
if (!lasi_ctrl)
return 0;
- /* Check the LASI */
+ /* Check the LASI on Rx */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
&rx_alarm_status);
(phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(phy->req_line_speed == SPEED_10000)) {
- DP(NETIF_MSG_LINK, "Advertising 10G\n");
- /* Restart autoneg for 10G*/
+ DP(NETIF_MSG_LINK, "Advertising 10G\n");
+ /* Restart autoneg for 10G*/
- bnx2x_cl45_write(bp, phy,
+ bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
0x3200);
} else if (phy->req_line_speed != SPEED_10 &&
static struct bnx2x_phy phy_null = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN,
.addr = 0,
- .flags = FLAGS_INIT_XGXS_FIRST,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_INIT_XGXS_FIRST,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_serdes = {
.type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
- .flags = 0,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_xgxs = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
- .flags = 0,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_7101 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101,
.addr = 0xff,
- .flags = FLAGS_FAN_FAILURE_DET_REQ,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8073 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
.addr = 0xff,
- .flags = FLAGS_HW_LOCK_REQUIRED,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_HW_LOCK_REQUIRED,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8705 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705,
.addr = 0xff,
- .flags = FLAGS_INIT_XGXS_FIRST,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_INIT_XGXS_FIRST,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8706 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
.addr = 0xff,
- .flags = FLAGS_INIT_XGXS_FIRST,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_INIT_XGXS_FIRST,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8726 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726,
.addr = 0xff,
+ .def_md_devad = 0,
.flags = (FLAGS_HW_LOCK_REQUIRED |
FLAGS_INIT_XGXS_FIRST),
- .def_md_devad = 0,
- .reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8727 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
.addr = 0xff,
- .flags = FLAGS_FAN_FAILURE_DET_REQ,
.def_md_devad = 0,
- .reserved = 0,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_8481 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
.addr = 0xff,
+ .def_md_devad = 0,
.flags = FLAGS_FAN_FAILURE_DET_REQ |
FLAGS_REARM_LATCH_SIGNAL,
- .def_md_devad = 0,
- .reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_84823 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823,
.addr = 0xff,
+ .def_md_devad = 0,
.flags = FLAGS_FAN_FAILURE_DET_REQ |
FLAGS_REARM_LATCH_SIGNAL,
- .def_md_devad = 0,
- .reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
static struct bnx2x_phy phy_84833 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833,
.addr = 0xff,
+ .def_md_devad = 0,
.flags = FLAGS_FAN_FAILURE_DET_REQ |
FLAGS_REARM_LATCH_SIGNAL,
- .def_md_devad = 0,
- .reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
return 0;
}
-static void set_phy_vars(struct link_params *params)
-{
- struct bnx2x *bp = params->bp;
- u8 actual_phy_idx, phy_index, link_cfg_idx;
- u8 phy_config_swapped = params->multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED;
- for (phy_index = INT_PHY; phy_index < params->num_phys;
- phy_index++) {
- link_cfg_idx = LINK_CONFIG_IDX(phy_index);
- actual_phy_idx = phy_index;
- if (phy_config_swapped) {
- if (phy_index == EXT_PHY1)
- actual_phy_idx = EXT_PHY2;
- else if (phy_index == EXT_PHY2)
- actual_phy_idx = EXT_PHY1;
- }
- params->phy[actual_phy_idx].req_flow_ctrl =
- params->req_flow_ctrl[link_cfg_idx];
-
- params->phy[actual_phy_idx].req_line_speed =
- params->req_line_speed[link_cfg_idx];
-
- params->phy[actual_phy_idx].speed_cap_mask =
- params->speed_cap_mask[link_cfg_idx];
-
- params->phy[actual_phy_idx].req_duplex =
- params->req_duplex[link_cfg_idx];
-
- DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"
- " speed_cap_mask %x\n",
- params->phy[actual_phy_idx].req_flow_ctrl,
- params->phy[actual_phy_idx].req_line_speed,
- params->phy[actual_phy_idx].speed_cap_mask);
- }
-}
-
-int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
+void bnx2x_init_bmac_loopback(struct link_params *params,
+ struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- DP(NETIF_MSG_LINK, "Phy Initialization started\n");
- DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",
- params->req_line_speed[0], params->req_flow_ctrl[0]);
- DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",
- params->req_line_speed[1], params->req_flow_ctrl[1]);
- vars->link_status = 0;
- vars->phy_link_up = 0;
- vars->link_up = 0;
- vars->line_speed = 0;
- vars->duplex = DUPLEX_FULL;
- vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
- vars->mac_type = MAC_TYPE_NONE;
- vars->phy_flags = 0;
-
- /* disable attentions */
- bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
- (NIG_MASK_XGXS0_LINK_STATUS |
- NIG_MASK_XGXS0_LINK10G |
- NIG_MASK_SERDES0_LINK_STATUS |
- NIG_MASK_MI_INT));
-
- bnx2x_emac_init(params, vars);
-
- if (params->num_phys == 0) {
- DP(NETIF_MSG_LINK, "No phy found for initialization !!\n");
- return -EINVAL;
- }
- set_phy_vars(params);
-
- DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys);
- if (params->loopback_mode == LOOPBACK_BMAC) {
-
vars->link_up = 1;
vars->line_speed = SPEED_10000;
vars->duplex = DUPLEX_FULL;
bnx2x_bmac_enable(params, vars, 1);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
- } else if (params->loopback_mode == LOOPBACK_EMAC) {
-
+void bnx2x_init_emac_loopback(struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
vars->link_up = 1;
vars->line_speed = SPEED_1000;
vars->duplex = DUPLEX_FULL;
bnx2x_emac_enable(params, vars, 1);
bnx2x_emac_program(params, vars);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
- } else if ((params->loopback_mode == LOOPBACK_XGXS) ||
- (params->loopback_mode == LOOPBACK_EXT_PHY)) {
-
+void bnx2x_init_xgxs_loopback(struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
vars->link_up = 1;
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
vars->duplex = DUPLEX_FULL;
- if (params->req_line_speed[0] == SPEED_1000) {
+ if (params->req_line_speed[0] == SPEED_1000)
vars->line_speed = SPEED_1000;
- vars->mac_type = MAC_TYPE_EMAC;
- } else {
+ else
vars->line_speed = SPEED_10000;
- vars->mac_type = MAC_TYPE_BMAC;
- }
- bnx2x_xgxs_deassert(params);
- bnx2x_link_initialize(params, vars);
- if (params->req_line_speed[0] == SPEED_1000) {
- bnx2x_emac_program(params, vars);
- bnx2x_emac_enable(params, vars, 0);
- } else
- bnx2x_bmac_enable(params, vars, 0);
+ bnx2x_xgxs_deassert(params);
+ bnx2x_link_initialize(params, vars);
+
+ if (params->req_line_speed[0] == SPEED_1000) {
+ bnx2x_emac_program(params, vars);
+ bnx2x_emac_enable(params, vars, 0);
+
+ } else
+ bnx2x_bmac_enable(params, vars, 0);
+
+
if (params->loopback_mode == LOOPBACK_XGXS) {
/* set 10G XGXS loopback */
params->phy[INT_PHY].config_loopback(
}
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
- bnx2x_set_led(params, vars,
- LED_MODE_OPER, vars->line_speed);
- } else
- /* No loopback */
- {
+ bnx2x_set_led(params, vars, LED_MODE_OPER, vars->line_speed);
+}
+
+int bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ DP(NETIF_MSG_LINK, "Phy Initialization started\n");
+ DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",
+ params->req_line_speed[0], params->req_flow_ctrl[0]);
+ DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",
+ params->req_line_speed[1], params->req_flow_ctrl[1]);
+ vars->link_status = 0;
+ vars->phy_link_up = 0;
+ vars->link_up = 0;
+ vars->line_speed = 0;
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ vars->mac_type = MAC_TYPE_NONE;
+ vars->phy_flags = 0;
+
+ /* disable attentions */
+ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + params->port*4,
+ (NIG_MASK_XGXS0_LINK_STATUS |
+ NIG_MASK_XGXS0_LINK10G |
+ NIG_MASK_SERDES0_LINK_STATUS |
+ NIG_MASK_MI_INT));
+
+ bnx2x_emac_init(params, vars);
+
+ if (params->num_phys == 0) {
+ DP(NETIF_MSG_LINK, "No phy found for initialization !!\n");
+ return -EINVAL;
+ }
+ set_phy_vars(params, vars);
+
+ DP(NETIF_MSG_LINK, "Num of phys on board: %d\n", params->num_phys);
+ switch (params->loopback_mode) {
+ case LOOPBACK_BMAC:
+ bnx2x_init_bmac_loopback(params, vars);
+ break;
+ case LOOPBACK_EMAC:
+ bnx2x_init_emac_loopback(params, vars);
+ break;
+ case LOOPBACK_XGXS:
+ case LOOPBACK_EXT_PHY:
+ bnx2x_init_xgxs_loopback(params, vars);
+ break;
+ default:
+ /* No loopback */
if (params->switch_cfg == SWITCH_CFG_10G)
bnx2x_xgxs_deassert(params);
else
bnx2x_link_initialize(params, vars);
msleep(30);
bnx2x_link_int_enable(params);
+ break;
}
return 0;
}
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff