This patch setups L1 L0S pci link values.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
#include "iwl-commands.h"
-#define PCI_LINK_CTRL 0x0F0
+/* PCI registers */
+#define PCI_LINK_CTRL 0x0F0 /* 1 byte */
#define PCI_POWER_SOURCE 0x0C8
#define PCI_REG_WUM8 0x0E8
+
+/* PCI register values */
+#define PCI_LINK_VAL_L0S_EN 0x01
+#define PCI_LINK_VAL_L1_EN 0x02
#define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000)
#define TFD_QUEUE_SIZE_MAX (256)
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+ /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
+ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
/* set "initialization complete" bit to move adapter
* D0U* --> D0A* state */
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
goto out;
/* enable DMA */
- iwl_write_prph(priv, APMG_CLK_CTRL_REG,
- APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+ iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
+ APMG_CLK_VAL_BSM_CLK_RQT);
udelay(20);
+ /* disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
- /* disable L1 entry -- workaround for pre-B1 */
- pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
+ /* L1 is enabled by BIOS */
+ if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+ /* diable L0S disabled L1A enabled */
+ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ else
+ /* L0S enabled L1A disabled */
+ iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+ /* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
+ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
/* set "initialization complete" bit to move adapter
return ret;
/* enable DMA */
- iwl_write_prph(priv, APMG_CLK_EN_REG,
- APMG_CLK_VAL_DMA_CLK_RQT);
+ iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(20);
+ /* disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
- APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+ APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
iwl_release_nic_access(priv);
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
- /* disable L1 entry -- workaround for pre-B1 */
- pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
+ /* L1 is enabled by BIOS */
+ if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+ /* diable L0S disabled L1A enabled */
+ iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
+ else
+ /* L0S enabled L1A disabled */
+ iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* EEPROM reads */
#define CSR_EEPROM_REG (CSR_BASE+0x02c)
#define CSR_EEPROM_GP (CSR_BASE+0x030)
+#define CSR_GIO_REG (CSR_BASE+0x03C)
#define CSR_GP_UCODE (CSR_BASE+0x044)
#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
-#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
#define CSR_LED_REG (CSR_BASE+0x094)
+#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
/* Analog phase-lock-loop configuration */
#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
+/* CSR GIO */
+#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
+
/* UCODE DRV GP */
#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
#define CSR_UCODE_SW_BIT_RFKILL (0x00000002)