{nl,cfg}80211: make peer link expiration time configurable

If a STA has a peer that it hasn't seen any tx activity
from for a certain length of time, the peer link is
expired. This means the inactive STA is removed from the
list of peers and that STA is not considered a peer again
unless it re-peers.  Previously, this inactivity time was
always 30 minutes.  Now, add it to the mesh configuration
and allow it to be configured.  Retain 30 minutes as a
default value.

Signed-off-by: Colleen Twitty <colleen@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 855c76ccff385a85c850dece083fcf5ce385aaa3..31ca11672ca81f0d83daa69b8091bced73ba76f1 100644 (file)
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1124,6 +1124,9 @@ struct bss_parameters {
  *     setting for new peer links.
  * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
  *     after transmitting its beacon.
+ * @plink_timeout: If no tx activity is seen from a STA we've established
+ *     peering with for longer than this time (in seconds), then remove it
+ *     from the STA's list of peers.  Default is 30 minutes.
  */
 struct mesh_config {
        u16 dot11MeshRetryTimeout;
@@ -1153,6 +1156,7 @@ struct mesh_config {
        u16 dot11MeshHWMPconfirmationInterval;
        enum nl80211_mesh_power_mode power_mode;
        u16 dot11MeshAwakeWindowDuration;
+       u32 plink_timeout;
 };
 
 /**

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1f0019d4cce6155a532aadc9a4d3eb3725424287..ca6facf4df0cb063d8bdf4708b8a26526eacfa9d 100644 (file)
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2577,6 +2577,10 @@ enum nl80211_mesh_power_mode {
  *
  * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
  *
+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
+ *     established peering with for longer than this time (in seconds), then
+ *     remove it from the STA's list of peers.  Default is 30 minutes.
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2608,6 +2612,7 @@ enum nl80211_meshconf_params {
        NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
        NL80211_MESHCONF_POWER_MODE,
        NL80211_MESHCONF_AWAKE_WINDOW,
+       NL80211_MESHCONF_PLINK_TIMEOUT,
 
        /* keep last */
        __NL80211_MESHCONF_ATTR_AFTER_LAST,

diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 5dfb289ab7617da781372916816d4ecf2e479f9c..0daaf72e1b81faff65b7bf7700860c73a189c013 100644 (file)
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -18,6 +18,7 @@
 #define MESH_PATH_TO_ROOT_TIMEOUT      6000
 #define MESH_ROOT_INTERVAL     5000
 #define MESH_ROOT_CONFIRMATION_INTERVAL 2000
+#define MESH_DEFAULT_PLINK_TIMEOUT     1800 /* timeout in seconds */
 
 /*
  * Minimum interval between two consecutive PREQs originated by the same
@@ -75,6 +76,7 @@ const struct mesh_config default_mesh_config = {
        .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
        .power_mode = NL80211_MESH_POWER_ACTIVE,
        .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW,
+       .plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT,
 };
 
 const struct mesh_setup default_mesh_setup = {

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 88e820b73674fd82840a0962c28e029cc18381c8..8aa83c04d4ebf68b5686e52f3ca35da585844043 100644 (file)
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4575,7 +4575,9 @@ static int nl80211_get_mesh_config(struct sk_buff *skb,
            nla_put_u32(msg, NL80211_MESHCONF_POWER_MODE,
                        cur_params.power_mode) ||
            nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW,
-                       cur_params.dot11MeshAwakeWindowDuration))
+                       cur_params.dot11MeshAwakeWindowDuration) ||
+           nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
+                       cur_params.plink_timeout))
                goto nla_put_failure;
        nla_nest_end(msg, pinfoattr);
        genlmsg_end(msg, hdr);
@@ -4616,6 +4618,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
        [NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 },
        [NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U32 },
        [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 },
+       [NL80211_MESHCONF_PLINK_TIMEOUT] = { .type = NLA_U32 },
 };
 
 static const struct nla_policy
@@ -4753,6 +4756,9 @@ do {                                                                          \
        FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration,
                                  0, 65535, mask,
                                  NL80211_MESHCONF_AWAKE_WINDOW, nla_get_u16);
+       FILL_IN_MESH_PARAM_IF_SET(tb, cfg, plink_timeout, 1, 0xffffffff,
+                                 mask, NL80211_MESHCONF_PLINK_TIMEOUT,
+                                 nla_get_u32);
        if (mask_out)
                *mask_out = mask;