#ifndef cpu_has_llsc
#define cpu_has_llsc (cpu_data[0].options & MIPS_CPU_LLSC)
#endif
+#ifndef cpu_has_bp_ghist
+#define cpu_has_bp_ghist (cpu_data[0].options & MIPS_CPU_BP_GHIST)
+#endif
#ifndef kernel_uses_llsc
#define kernel_uses_llsc cpu_has_llsc
#endif
#define MIPS_CPU_RW_LLB 0x1000000000ull /* LLADDR/LLB writes are allowed */
#define MIPS_CPU_XPA 0x2000000000ull /* CPU supports Extended Physical Addressing */
#define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */
+#define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */
/*
* CPU ASE encodings
#define TX39_CONF_DRSIZE_SHIFT 0
#define TX39_CONF_DRSIZE_MASK 0x00000003
+/*
+ * Interesting Bits in the R10K CP0 Branch Diagnostic Register
+ */
+/* Disable Branch Target Address Cache */
+#define R10K_DIAG_D_BTAC (_ULCAST_(1) << 27)
+/* Enable Branch Prediction Global History */
+#define R10K_DIAG_E_GHIST (_ULCAST_(1) << 26)
+/* Disable Branch Return Cache */
+#define R10K_DIAG_D_BRC (_ULCAST_(1) << 22)
/*
* Coprocessor 1 (FPU) register names
#define read_c0_diag() __read_32bit_c0_register($22, 0)
#define write_c0_diag(val) __write_32bit_c0_register($22, 0, val)
+/* R10K CP0 Branch Diagnostic register is 64bits wide */
+#define read_c0_r10k_diag() __read_64bit_c0_register($22, 0)
+#define write_c0_r10k_diag(val) __write_64bit_c0_register($22, 0, val)
+
#define read_c0_diag1() __read_32bit_c0_register($22, 1)
#define write_c0_diag1(val) __write_32bit_c0_register($22, 1, val)
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
c->tlbsize = 64;
break;
case PRID_IMP_R14000:
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
- MIPS_CPU_LLSC;
+ MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
c->tlbsize = 64;
break;
case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */
else
cpu_set_nofpu_opts(c);
+ if (cpu_has_bp_ghist)
+ write_c0_r10k_diag(read_c0_r10k_diag() |
+ R10K_DIAG_E_GHIST);
+
if (cpu_has_mips_r2_r6) {
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
/* R2 has Performance Counter Interrupt indicator */