Use a more current logging style.
Add pr_fmt and missing newlines.
Remove embedded prefixes.
Neaten phy_print_status to avoid using KERN_CONT.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/list.h>
ext_write(0, phydev, PAGE6, PSF_CFG1, ver);
if (!phydev->attached_dev) {
- pr_warning("dp83640: expected to find an attached netdevice\n");
+ pr_warn("expected to find an attached netdevice\n");
return;
}
if (on) {
if (dev_mc_add(phydev->attached_dev, status_frame_dst))
- pr_warning("dp83640: failed to add mc address\n");
+ pr_warn("failed to add mc address\n");
} else {
if (dev_mc_del(phydev->attached_dev, status_frame_dst))
- pr_warning("dp83640: failed to delete mc address\n");
+ pr_warn("failed to delete mc address\n");
}
}
* read out and correct offsets
*/
val = ext_read(master, PAGE4, PTP_STS);
- pr_info("master PTP_STS 0x%04hx", val);
+ pr_info("master PTP_STS 0x%04hx\n", val);
val = ext_read(master, PAGE4, PTP_ESTS);
- pr_info("master PTP_ESTS 0x%04hx", val);
+ pr_info("master PTP_ESTS 0x%04hx\n", val);
event_ts.ns_lo = ext_read(master, PAGE4, PTP_EDATA);
event_ts.ns_hi = ext_read(master, PAGE4, PTP_EDATA);
event_ts.sec_lo = ext_read(master, PAGE4, PTP_EDATA);
list_for_each(this, &clock->phylist) {
tmp = list_entry(this, struct dp83640_private, list);
val = ext_read(tmp->phydev, PAGE4, PTP_STS);
- pr_info("slave PTP_STS 0x%04hx", val);
+ pr_info("slave PTP_STS 0x%04hx\n", val);
val = ext_read(tmp->phydev, PAGE4, PTP_ESTS);
- pr_info("slave PTP_ESTS 0x%04hx", val);
+ pr_info("slave PTP_ESTS 0x%04hx\n", val);
event_ts.ns_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
event_ts.ns_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
event_ts.sec_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
prune_rx_ts(dp83640);
if (list_empty(&dp83640->rxpool)) {
- pr_debug("dp83640: rx timestamp pool is empty\n");
+ pr_debug("rx timestamp pool is empty\n");
goto out;
}
rxts = list_first_entry(&dp83640->rxpool, struct rxts, list);
skb = skb_dequeue(&dp83640->tx_queue);
if (!skb) {
- pr_debug("dp83640: have timestamp but tx_queue empty\n");
+ pr_debug("have timestamp but tx_queue empty\n");
return;
}
ns = phy2txts(phy_txts);
list_for_each_safe(this, next, &phyter_clocks) {
clock = list_entry(this, struct dp83640_clock, list);
if (!list_empty(&clock->phylist)) {
- pr_warning("phy list non-empty while unloading");
+ pr_warn("phy list non-empty while unloading\n");
BUG();
}
list_del(&clock->list);
lpa |= LPA_10FULL;
break;
default:
- printk(KERN_WARNING "fixed phy: unknown speed\n");
+ pr_warn("fixed phy: unknown speed\n");
return -EINVAL;
}
} else {
lpa |= LPA_10HALF;
break;
default:
- printk(KERN_WARNING "fixed phy: unknown speed\n");
+ pr_warn("fixed phy: unknown speed\n");
return -EINVAL;
}
}
* option) any later version.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
err = device_register(&bus->dev);
if (err) {
- printk(KERN_ERR "mii_bus %s failed to register\n", bus->id);
+ pr_err("mii_bus %s failed to register\n", bus->id);
return -EINVAL;
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
+#define DEBUG
+
/* DP83865 phy identifier values */
#define DP83865_PHY_ID 0x20005c7a
ns_exp_write(phydev, 0x1c0,
ns_exp_read(phydev, 0x1c0) & 0xfffe);
- printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n",
- (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
+ pr_debug("10BASE-T HDX loopback %s\n",
+ (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
}
static int ns_config_init(struct phy_device *phydev)
* option) any later version.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
*/
void phy_print_status(struct phy_device *phydev)
{
- pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev),
- phydev->link ? "Up" : "Down");
if (phydev->link)
- printk(KERN_CONT " - %d/%s", phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "Full" : "Half");
-
- printk(KERN_CONT "\n");
+ pr_info("%s - Link is Up - %d/%s\n",
+ dev_name(&phydev->dev),
+ phydev->speed,
+ DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
+ else
+ pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
}
EXPORT_SYMBOL(phy_print_status);
-
/**
* phy_clear_interrupt - Ack the phy device's interrupt
* @phydev: the phy_device struct
phydev->speed = settings[idx].speed;
phydev->duplex = settings[idx].duplex;
- pr_info("Trying %d/%s\n", phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "FULL" : "HALF");
+ pr_info("Trying %d/%s\n",
+ phydev->speed, DUPLEX_FULL == phydev->duplex ? "FULL" : "HALF");
}
IRQF_SHARED,
"phy_interrupt",
phydev) < 0) {
- printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
- phydev->bus->name,
- phydev->irq);
+ pr_warn("%s: Can't get IRQ %d (PHY)\n",
+ phydev->bus->name, phydev->irq);
phydev->irq = PHY_POLL;
return 0;
}
phydev->autoneg = AUTONEG_DISABLE;
- pr_info("Trying %d/%s\n", phydev->speed,
- DUPLEX_FULL ==
- phydev->duplex ?
- "FULL" : "HALF");
+ pr_info("Trying %d/%s\n",
+ phydev->speed,
+ DUPLEX_FULL == phydev->duplex ?
+ "FULL" : "HALF");
}
break;
case PHY_NOLINK:
* option) any later version.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
retval = driver_register(&new_driver->driver);
if (retval) {
- printk(KERN_ERR "%s: Error %d in registering driver\n",
- new_driver->name, retval);
+ pr_err("%s: Error %d in registering driver\n",
+ new_driver->name, retval);
return retval;
}
* by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
static int __init ks8995_init(void)
{
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n");
+ pr_info(DRV_DESC " version " DRV_VERSION "\n");
return spi_register_driver(&ks8995_driver);
}