brcm80211: fmac: move busstate to struct brcmf_bus

busstate keeps track of the bus (USB/SDIO) status and is used by
both generic layer and bus layer. Move it to brcmf_bus helps to clean
up the interface. This patch is part of fullmac bus interface
refactoring.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
index a557971044bc2ee6a57c48fa74013b5850dd4913..a104b74e0004aa84123fae961d443a1aa6cd0c9b 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h
@@ -574,6 +574,7 @@ struct brcmf_dcmd {
 struct brcmf_bus {
        u8 type;                /* bus type */
        void *bus_priv;         /* pointer to bus private structure */
+       enum brcmf_bus_state state;
 };
 
 /* Forward decls for struct brcmf_pub (see below) */
@@ -586,6 +587,7 @@ struct brcmf_cfg80211_dev; /* cfg80211 device info */
 struct brcmf_pub {
        /* Linkage ponters */
        struct brcmf_sdio *bus;
+       struct brcmf_bus *bus_if;
        struct brcmf_proto *prot;
        struct brcmf_info *info;
        struct brcmf_cfg80211_dev *config;
@@ -593,7 +595,6 @@ struct brcmf_pub {
        /* Internal brcmf items */
        bool up;                /* Driver up/down (to OS) */
        bool txoff;             /* Transmit flow-controlled */
-       enum brcmf_bus_state busstate;
        uint hdrlen;            /* Total BRCMF header length (proto + bus) */
        uint maxctl;            /* Max size rxctl request from proto to bus */
        uint rxsz;              /* Rx buffer size bus module should use */
@@ -661,7 +662,6 @@ struct brcmf_pub {
 
        u8 country_code[BRCM_CNTRY_BUF_SZ];
        char eventmask[BRCMF_EVENTING_MASK_LEN];
-
 };
 
 struct brcmf_if_event {
@@ -687,7 +687,7 @@ extern uint brcmf_c_mkiovar(char *name, char *data, uint datalen,
  * bus_hdrlen specifies required headroom for bus module header.
  */
 extern struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus,
-                                     uint bus_hdrlen);
+                                     uint bus_hdrlen, struct device *dev);
 extern int brcmf_net_attach(struct brcmf_pub *drvr, int idx);
 extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev);
 

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
index e34c5c3d1d5556190c03dbc8dcb71d46ada68128..8e46bc64ca5f24068ddba7e468c9cf3a2ed033fc 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c
@@ -280,7 +280,7 @@ brcmf_proto_dcmd(struct brcmf_pub *drvr, int ifidx, struct brcmf_dcmd *dcmd,
        struct brcmf_proto *prot = drvr->prot;
        int ret = -1;
 
-       if (drvr->busstate == BRCMF_BUS_DOWN) {
+       if (drvr->bus_if->state == BRCMF_BUS_DOWN) {
                brcmf_dbg(ERROR, "bus is down. we have nothing to do.\n");
                return ret;
        }

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index e8f7f78f52cc1cc45354d30d4ebcad3b84ad0ed1..c13b30f6d22069ad60205b0a2802cd2f745195e6 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -292,7 +292,7 @@ int brcmf_sendpkt(struct brcmf_pub *drvr, int ifidx, struct sk_buff *pktbuf)
        struct brcmf_info *drvr_priv = drvr->info;
 
        /* Reject if down */
-       if (!drvr->up || (drvr->busstate == BRCMF_BUS_DOWN))
+       if (!drvr->up || (drvr->bus_if->state == BRCMF_BUS_DOWN))
                return -ENODEV;
 
        /* Update multicast statistic */
@@ -322,9 +322,11 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev)
        brcmf_dbg(TRACE, "Enter\n");
 
        /* Reject if down */
-       if (!drvr_priv->pub.up || (drvr_priv->pub.busstate == BRCMF_BUS_DOWN)) {
-               brcmf_dbg(ERROR, "xmit rejected pub.up=%d busstate=%d\n",
-                         drvr_priv->pub.up, drvr_priv->pub.busstate);
+       if (!drvr_priv->pub.up ||
+           (drvr_priv->pub.bus_if->state == BRCMF_BUS_DOWN)) {
+               brcmf_dbg(ERROR, "xmit rejected pub.up=%d state=%d\n",
+                         drvr_priv->pub.up,
+                         drvr_priv->pub.bus_if->state);
                netif_stop_queue(ndev);
                return -ENODEV;
        }
@@ -761,7 +763,7 @@ s32 brcmf_exec_dcmd(struct net_device *ndev, u32 cmd, void *arg, u32 len)
                buflen = min_t(uint, dcmd.len, BRCMF_DCMD_MAXLEN);
 
        /* send to dongle (must be up, and wl) */
-       if ((drvr_priv->pub.busstate != BRCMF_BUS_DATA)) {
+       if ((drvr_priv->pub.bus_if->state != BRCMF_BUS_DATA)) {
                brcmf_dbg(ERROR, "DONGLE_DOWN\n");
                err = -EIO;
                goto done;
@@ -940,7 +942,8 @@ void brcmf_del_if(struct brcmf_info *drvr_priv, int ifidx)
        }
 }
 
-struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen)
+struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen,
+                              struct device *dev)
 {
        struct brcmf_info *drvr_priv = NULL;
 
@@ -959,6 +962,7 @@ struct brcmf_pub *brcmf_attach(struct brcmf_sdio *bus, uint bus_hdrlen)
        /* Link to bus module */
        drvr_priv->pub.bus = bus;
        drvr_priv->pub.hdrlen = bus_hdrlen;
+       drvr_priv->pub.bus_if = dev_get_drvdata(dev);
 
        /* Attach and link in the protocol */
        if (brcmf_proto_attach(&drvr_priv->pub) != 0) {
@@ -995,7 +999,7 @@ int brcmf_bus_start(struct brcmf_pub *drvr)
        }
 
        /* If bus is not ready, can't come up */
-       if (drvr_priv->pub.busstate != BRCMF_BUS_DATA) {
+       if (drvr_priv->pub.bus_if->state != BRCMF_BUS_DATA) {
                brcmf_dbg(ERROR, "failed bus is not ready\n");
                return -ENODEV;
        }

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 9ab906a91c48c698fec7c2ffcabc78af5b60270c..7c8b5f77042c62a51025a850d1df81a3d756ded7 100644 (file)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1068,7 +1068,7 @@ static void brcmf_sdbrcm_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
 
        /* If we can't reach the device, signal failure */
        if (err || brcmf_sdcard_regfail(bus->sdiodev))
-               bus->drvr->busstate = BRCMF_BUS_DOWN;
+               bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
 }
 
 /* copy a buffer into a pkt buffer chain */
@@ -1714,7 +1714,8 @@ brcmf_sdbrcm_readframes(struct brcmf_sdio *bus, uint maxframes, bool *finished)
        *finished = false;
 
        for (rxseq = bus->rx_seq, rxleft = maxframes;
-            !bus->rxskip && rxleft && bus->drvr->busstate != BRCMF_BUS_DOWN;
+            !bus->rxskip && rxleft &&
+            bus->drvr->bus_if->state != BRCMF_BUS_DOWN;
             rxseq++, rxleft--) {
 
                /* Handle glomming separately */
@@ -2286,7 +2287,7 @@ static uint brcmf_sdbrcm_sendfromq(struct brcmf_sdio *bus, uint maxframes)
        }
 
        /* Deflow-control stack if needed */
-       if (drvr->up && (drvr->busstate == BRCMF_BUS_DATA) &&
+       if (drvr->up && (drvr->bus_if->state == BRCMF_BUS_DATA) &&
            drvr->txoff && (pktq_len(&bus->txq) < TXLOW))
                brcmf_txflowcontrol(drvr, 0, OFF);
 
@@ -2321,7 +2322,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
                                               SBSDIO_DEVICE_CTL, &err);
                if (err) {
                        brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
-                       bus->drvr->busstate = BRCMF_BUS_DOWN;
+                       bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
                }
 #endif                         /* BCMDBG */
 
@@ -2331,7 +2332,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
                if (err) {
                        brcmf_dbg(ERROR, "error reading CSR: %d\n",
                                  err);
-                       bus->drvr->busstate = BRCMF_BUS_DOWN;
+                       bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
                }
 
                brcmf_dbg(INFO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
@@ -2344,7 +2345,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
                        if (err) {
                                brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
                                          err);
-                               bus->drvr->busstate = BRCMF_BUS_DOWN;
+                               bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
                        }
                        devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
                        brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
@@ -2352,7 +2353,7 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
                        if (err) {
                                brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
                                          err);
-                               bus->drvr->busstate = BRCMF_BUS_DOWN;
+                               bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
                        }
                        bus->clkstate = CLK_AVAIL;
                } else {
@@ -2508,11 +2509,11 @@ clkwait:
                 else await next interrupt */
        /* On failed register access, all bets are off:
                 no resched or interrupts */
-       if ((bus->drvr->busstate == BRCMF_BUS_DOWN) ||
+       if ((bus->drvr->bus_if->state == BRCMF_BUS_DOWN) ||
            brcmf_sdcard_regfail(bus->sdiodev)) {
                brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n",
                          brcmf_sdcard_regfail(bus->sdiodev));
-               bus->drvr->busstate = BRCMF_BUS_DOWN;
+               bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
                bus->intstatus = 0;
        } else if (bus->clkstate == CLK_PENDING) {
                brcmf_dbg(INFO, "rescheduled due to CLK_PENDING awaiting I_CHIPACTIVE interrupt\n");
@@ -2549,7 +2550,7 @@ static int brcmf_sdbrcm_dpc_thread(void *data)
                if (!wait_for_completion_interruptible(&bus->dpc_wait)) {
                        /* Call bus dpc unless it indicated down
                        (then clean stop) */
-                       if (bus->drvr->busstate != BRCMF_BUS_DOWN) {
+                       if (bus->drvr->bus_if->state != BRCMF_BUS_DOWN) {
                                if (brcmf_sdbrcm_dpc(bus))
                                        complete(&bus->dpc_wait);
                        } else {
@@ -3111,7 +3112,7 @@ static int brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter)
                /* Allow HT Clock now that the ARM is running. */
                bus->alp_only = false;
 
-               bus->drvr->busstate = BRCMF_BUS_LOAD;
+               bus->drvr->bus_if->state = BRCMF_BUS_LOAD;
        }
 fail:
        return bcmerror;
@@ -3354,7 +3355,7 @@ void brcmf_sdbrcm_bus_stop(struct brcmf_sdio *bus)
        bus->hostintmask = 0;
 
        /* Change our idea of bus state */
-       bus->drvr->busstate = BRCMF_BUS_DOWN;
+       bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
 
        /* Force clocks on backplane to be sure F2 interrupt propagates */
        saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
@@ -3410,7 +3411,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr)
        brcmf_dbg(TRACE, "Enter\n");
 
        /* try to download image and nvram to the dongle */
-       if (drvr->busstate == BRCMF_BUS_DOWN) {
+       if (drvr->bus_if->state == BRCMF_BUS_DOWN) {
                if (!(brcmf_sdbrcm_download_firmware(bus)))
                        return -1;
        }
@@ -3476,7 +3477,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr)
                                       SBSDIO_WATERMARK, 8, &err);
 
                /* Set bus state according to enable result */
-               drvr->busstate = BRCMF_BUS_DATA;
+               drvr->bus_if->state = BRCMF_BUS_DATA;
        }
 
        else {
@@ -3491,7 +3492,7 @@ int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr)
                               SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
 
        /* If we didn't come up, turn off backplane clock */
-       if (drvr->busstate != BRCMF_BUS_DATA)
+       if (drvr->bus_if->state != BRCMF_BUS_DATA)
                brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
 
 exit:
@@ -3511,7 +3512,7 @@ void brcmf_sdbrcm_isr(void *arg)
                return;
        }
 
-       if (bus->drvr->busstate == BRCMF_BUS_DOWN) {
+       if (bus->drvr->bus_if->state == BRCMF_BUS_DOWN) {
                brcmf_dbg(ERROR, "bus is down. we have nothing to do\n");
                return;
        }
@@ -3585,7 +3586,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_pub *drvr)
        }
 #ifdef BCMDBG
        /* Poll for console output periodically */
-       if (drvr->busstate == BRCMF_BUS_DATA && bus->console_interval != 0) {
+       if (drvr->bus_if->state == BRCMF_BUS_DATA &&
+           bus->console_interval != 0) {
                bus->console.count += BRCMF_WD_POLL_MS;
                if (bus->console.count >= bus->console_interval) {
                        bus->console.count -= bus->console_interval;
@@ -3764,7 +3766,7 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus)
        brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
                               SDIO_FUNC_ENABLE_1, NULL);
 
-       bus->drvr->busstate = BRCMF_BUS_DOWN;
+       bus->drvr->bus_if->state = BRCMF_BUS_DOWN;
        bus->sleeping = false;
        bus->rxflow = false;
 
@@ -3924,7 +3926,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
        }
 
        /* Attach to the brcmf/OS/network interface */
-       bus->drvr = brcmf_attach(bus, SDPCM_RESERVE);
+       bus->drvr = brcmf_attach(bus, SDPCM_RESERVE, bus->sdiodev->dev);
        if (!bus->drvr) {
                brcmf_dbg(ERROR, "brcmf_attach failed\n");
                goto fail;
@@ -4003,7 +4005,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
        }
 
        /* don't start the wd until fw is loaded */
-       if (bus->drvr->busstate == BRCMF_BUS_DOWN)
+       if (bus->drvr->bus_if->state == BRCMF_BUS_DOWN)
                return;
 
        if (wdtick) {