davinci: da830/omap-l137 evm: add support for GPIO based MMC/SD card detection

The DA830/OMAP-L137 EVM has GPIO based card detection logic, but the current
code does not use it.

Add support for GPIO based card detection to avoid reading the card to see
if a card is present or not.

Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index dc19870b23cd326dcc99795266d00f85df08da7f..8e670372d7fe57ae445e9d152c114d25f9c478c5 100644 (file)
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -229,14 +229,21 @@ static const short da830_evm_mmc_sd_pins[] = {
 };
 
 #define DA830_MMCSD_WP_PIN             GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN             GPIO_TO_PIN(2, 2)
 
 static int da830_evm_mmc_get_ro(int index)
 {
        return gpio_get_value(DA830_MMCSD_WP_PIN);
 }
 
+static int da830_evm_mmc_get_cd(int index)
+{
+       return !gpio_get_value(DA830_MMCSD_CD_PIN);
+}
+
 static struct davinci_mmc_config da830_evm_mmc_config = {
        .get_ro                 = da830_evm_mmc_get_ro,
+       .get_cd                 = da830_evm_mmc_get_cd,
        .wires                  = 4,
        .max_freq               = 50000000,
        .caps                   = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -262,6 +269,14 @@ static inline void da830_evm_init_mmc(void)
        }
        gpio_direction_input(DA830_MMCSD_WP_PIN);
 
+       ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
+       if (ret) {
+               pr_warning("da830_evm_init: can not open GPIO %d\n",
+                          DA830_MMCSD_CD_PIN);
+               return;
+       }
+       gpio_direction_input(DA830_MMCSD_CD_PIN);
+
        ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
        if (ret) {
                pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",