if (changes & BSS_CHANGED_ASSOC) {
D_MAC80211("ASSOC %d\n", bss_conf->assoc);
if (bss_conf->assoc) {
- il->timestamp = bss_conf->last_tsf;
+ il->timestamp = bss_conf->sync_tsf;
if (!il_is_rfkill(il))
il->ops->post_associate(il);
if (changes & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
- priv->timestamp = bss_conf->last_tsf;
+ priv->timestamp = bss_conf->sync_tsf;
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
} else {
/*
/* Update the AID, this is needed for dynamic PS support */
rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
- rt2x00dev->last_beacon = bss_conf->last_tsf;
+ rt2x00dev->last_beacon = bss_conf->sync_tsf;
/* Update global beacon interval time, this is needed for PS support */
rt2x00dev->beacon_int = bss_conf->beacon_int;
* valid in station mode only while @assoc is true and if also
* requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
* @ps_dtim_period)
- * @last_tsf: last beacon's/probe response's TSF timestamp (could be old
+ * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
* as it may have been received during scanning long ago)
+ * @sync_device_ts: the device timestamp corresponding to the sync_tsf,
+ * the driver/device can use this to calculate synchronisation
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
* @basic_rates: bitmap of basic rates, each bit stands for an
u8 dtim_period;
u16 beacon_int;
u16 assoc_capability;
- u64 last_tsf;
+ u64 sync_tsf;
+ u32 sync_device_ts;
u32 basic_rates;
int mcast_rate[IEEE80211_NUM_BANDS];
u16 ht_operation_mode;
*
* @mactime: value in microseconds of the 64-bit Time Synchronization Function
* (TSF) timer when the first data symbol (MPDU) arrived at the hardware.
+ * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use
+ * it but can store it and pass it back to the driver for synchronisation
* @band: the active band when this frame was received
* @freq: frequency the radio was tuned to when receiving this frame, in MHz
* @signal: signal strength when receiving this frame, either in dBm, in dB or
*/
struct ieee80211_rx_status {
u64 mactime;
+ u32 device_timestamp;
u16 flag;
u16 freq;
u8 rate_idx;
size_t ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
+ u32 device_ts;
+
u8 dtim_period;
bool wmm_used;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
bss_info_changed |= BSS_CHANGED_ASSOC;
- /* set timing information */
- bss_conf->beacon_int = cbss->beacon_interval;
- bss_conf->last_tsf = cbss->tsf;
-
- bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
- /* tell driver about BSSID and basic rates */
+ /* set timing information */
+ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
+ sdata->vif.bss_conf.sync_tsf = cbss->tsf;
+ sdata->vif.bss_conf.sync_device_ts = bss->device_ts;
+
+ /* tell driver about BSSID, basic rates and timing */
ieee80211_bss_info_change_notify(sdata,
- BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES);
+ BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
+ BSS_CHANGED_BEACON_INT);
if (assoc)
sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
cbss = cfg80211_inform_bss_frame(local->hw.wiphy, channel,
mgmt, len, signal, GFP_ATOMIC);
-
if (!cbss)
return NULL;
cbss->free_priv = ieee80211_rx_bss_free;
bss = (void *)cbss->priv;
+ bss->device_ts = rx_status->device_timestamp;
+
if (elems->parse_error) {
if (beacon)
bss->corrupt_data |= IEEE80211_BSS_CORRUPT_BEACON;
__field(u8, dtimper)
__field(u16, bcnint)
__field(u16, assoc_cap)
- __field(u64, timestamp)
+ __field(u64, sync_tsf)
+ __field(u32, sync_device_ts)
__field(u32, basic_rates)
__field(u32, changed)
__field(bool, enable_beacon)
__entry->dtimper = info->dtim_period;
__entry->bcnint = info->beacon_int;
__entry->assoc_cap = info->assoc_capability;
- __entry->timestamp = info->last_tsf;
+ __entry->sync_tsf = info->sync_tsf;
+ __entry->sync_device_ts = info->sync_device_ts;
__entry->basic_rates = info->basic_rates;
__entry->enable_beacon = info->enable_beacon;
__entry->ht_operation_mode = info->ht_operation_mode;