staging: comedi: ni_labpc: introduce labpc_ai_set_chan_and_gain()
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Fri, 22 Mar 2013 16:48:44 +0000 (09:48 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Mon, 25 Mar 2013 18:42:58 +0000 (11:42 -0700)
Introduce a helper function to set the channel and gain bits in the
COMMAND1_REG.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/ni_labpc.c

index 0b68e13e23770d51b61a6ae156c70048cc091ccf..dbc3589701716dbd308e8c07370ded70692afd25 100644 (file)
@@ -354,6 +354,25 @@ static bool labpc_range_is_unipolar(struct comedi_subdevice *s,
                return true;
 }
 
+static void labpc_ai_set_chan_and_gain(struct comedi_device *dev,
+                                      enum scan_mode mode,
+                                      unsigned int chan,
+                                      unsigned int range,
+                                      unsigned int aref)
+{
+       const struct labpc_boardinfo *board = comedi_board(dev);
+       struct labpc_private *devpriv = dev->private;
+
+       /* munge channel bits for differential/scan disabled mode */
+       if ((mode == MODE_SINGLE_CHAN || mode == MODE_SINGLE_CHAN_INTERVAL) &&
+           aref == AREF_DIFF)
+               chan *= 2;
+       devpriv->cmd1 = ADC_CHAN_BITS(chan);
+       devpriv->cmd1 |= board->ai_range_code[range];
+
+       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
+}
+
 static void labpc_clear_adc_fifo(const struct comedi_device *dev)
 {
        struct labpc_private *devpriv = dev->private;
@@ -388,14 +407,7 @@ static int labpc_ai_insn_read(struct comedi_device *dev,
        devpriv->cmd3 = 0;
        devpriv->write_byte(devpriv->cmd3, dev->iobase + COMMAND3_REG);
 
-       /* set gain and channel */
-       devpriv->cmd1 = 0;
-       devpriv->cmd1 |= board->ai_range_code[range];
-       /* munge channel bits for differential/scan disabled mode */
-       if (aref == AREF_DIFF)
-               chan *= 2;
-       devpriv->cmd1 |= ADC_CHAN_BITS(chan);
-       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
+       labpc_ai_set_chan_and_gain(dev, MODE_SINGLE_CHAN, chan, range, aref);
 
        /* setup cmd6 register for 1200 boards */
        if (board->register_layout == labpc_1200_layout) {
@@ -950,15 +962,8 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                devpriv->write_byte(devpriv->cmd6, dev->iobase + COMMAND6_REG);
        }
 
-       /* setup channel list, etc (cmd1 register) */
-       devpriv->cmd1 = 0;
-       /* munge channel bits for differential / scan disabled mode */
-       if ((mode == MODE_SINGLE_CHAN || mode == MODE_SINGLE_CHAN_INTERVAL) &&
-           aref == AREF_DIFF)
-               chan *= 2;
-       devpriv->cmd1 |= ADC_CHAN_BITS(chan);
-       devpriv->cmd1 |= board->ai_range_code[range];
-       devpriv->write_byte(devpriv->cmd1, dev->iobase + COMMAND1_REG);
+       labpc_ai_set_chan_and_gain(dev, mode, chan, range, aref);
+
        /* manual says to set scan enable bit on second pass */
        if (mode == MODE_MULT_CHAN_UP || mode == MODE_MULT_CHAN_DOWN) {
                devpriv->cmd1 |= ADC_SCAN_EN_BIT;