Move the MIPS device-trees into the appropriate vendor sub-directories.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8835/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
PHONY += dtbs
dtbs: scripts
- $(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
+ $(Q)$(MAKE) $(build)=arch/mips/boot/dts
archprepare:
ifdef CONFIG_MIPS32_N32
-dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
-dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
-dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
-dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
-dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
-dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
-dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
-dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
-dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
-dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
-dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
-dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
-
-obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
-
-targets += dtbs
-targets += $(dtb-y)
-
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files += *.dtb *.dtb.S
+dts-dirs += brcm
+dts-dirs += cavium-octeon
+dts-dirs += lantiq
+dts-dirs += mti
+dts-dirs += netlogic
+dts-dirs += ralink
+
+obj-y := $(addsuffix /, $(dts-dirs))
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb *.dtb.S
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "brcm,bcm3384", "brcm,bcm33843";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* On BMIPS5000 this is 1/8th of the CPU core clock */
- mips-hpt-frequency = <100000000>;
-
- cpu@0 {
- compatible = "brcm,bmips5000";
- device_type = "cpu";
- reg = <0>;
- };
-
- cpu@1 {
- compatible = "brcm,bmips5000";
- device_type = "cpu";
- reg = <1>;
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- periph_clk: periph_clk@0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <54000000>;
- };
- };
-
- aliases {
- uart0 = &uart0;
- };
-
- cpu_intc: cpu_intc@0 {
- #address-cells = <0>;
- compatible = "mti,cpu-interrupt-controller";
-
- interrupt-controller;
- #interrupt-cells = <1>;
- };
-
- periph_intc: periph_intc@14e00038 {
- compatible = "brcm,bcm3384-intc";
- reg = <0x14e00038 0x8 0x14e00340 0x8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpu_intc>;
- interrupts = <4>;
- };
-
- zmips_intc: zmips_intc@104b0060 {
- compatible = "brcm,bcm3384-intc";
- reg = <0x104b0060 0x8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&periph_intc>;
- interrupts = <29>;
- };
-
- iop_intc: iop_intc@14e00058 {
- compatible = "brcm,bcm3384-intc";
- reg = <0x14e00058 0x8>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpu_intc>;
- interrupts = <6>;
- };
-
- uart0: serial@14e00520 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x14e00520 0x18>;
- interrupt-parent = <&periph_intc>;
- interrupts = <2>;
- clocks = <&periph_clk>;
- status = "disabled";
- };
-
- ehci0: usb@15400300 {
- compatible = "brcm,bcm3384-ehci", "generic-ehci";
- reg = <0x15400300 0x100>;
- big-endian;
- interrupt-parent = <&periph_intc>;
- interrupts = <41>;
- status = "disabled";
- };
-
- ohci0: usb@15400400 {
- compatible = "brcm,bcm3384-ohci", "generic-ohci";
- reg = <0x15400400 0x100>;
- big-endian;
- no-big-frame-no;
- interrupt-parent = <&periph_intc>;
- interrupts = <40>;
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "bcm3384.dtsi"
-
-/ {
- compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
- model = "Broadcom BCM93384WVG";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x04000000>;
- dma-xor-mask = <0x08000000>;
- dma-xor-limit = <0x0fffffff>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
--- /dev/null
+dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384", "brcm,bcm33843";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* On BMIPS5000 this is 1/8th of the CPU core clock */
+ mips-hpt-frequency = <100000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ periph_clk: periph_clk@0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: cpu_intc@0 {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ periph_intc: periph_intc@14e00038 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ zmips_intc: zmips_intc@104b0060 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x104b0060 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <29>;
+ };
+
+ iop_intc: iop_intc@14e00058 {
+ compatible = "brcm,bcm3384-intc";
+ reg = <0x14e00058 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "bcm3384.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
+ model = "Broadcom BCM93384WVG";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x04000000>;
+ dma-xor-mask = <0x08000000>;
+ dma-xor-limit = <0x0fffffff>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
--- /dev/null
+dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/dts-v1/;
+/*
+ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+ compatible = "cavium,octeon-3860";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu: interrupt-controller@1070000000000 {
+ compatible = "cavium,octeon-3860-ciu";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 1)
+ * 2) Bit within the register (0..63)
+ */
+ #interrupt-cells = <2>;
+ reg = <0x10700 0x00000000 0x0 0x7000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pin connect to 16 consecutive CUI bits */
+ interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+ <0 20>, <0 21>, <0 22>, <0 23>,
+ <0 24>, <0 25>, <0 26>, <0 27>,
+ <0 28>, <0 29>, <0 30>, <0 31>;
+ };
+
+ smi0: mdio@1180000001800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001800 0x0 0x40>;
+
+ phy0: ethernet-phy@0 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000001900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001900 0x0 0x40>;
+
+ phy100: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy101: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy102: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy103: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <0 62>, <1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ mix1: ethernet@1070000100800 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <1>;
+ interrupts = <1 18>, < 1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy2>;
+ cavium,alt-phy-handle = <&phy100>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy3>;
+ cavium,alt-phy-handle = <&phy101>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy4>;
+ cavium,alt-phy-handle = <&phy102>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy5>;
+ cavium,alt-phy-handle = <&phy103>;
+ };
+ ethernet@4 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x4>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@5 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x5>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@6 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x6>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@7 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x7>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@8 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x8>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@9 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x9>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@a {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xa>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@b {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xb>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@c {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xc>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@d {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xd>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@e {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xe>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@f {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xf>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy6>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy7>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy8>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy9>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <0 45>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
+
+ twsi1: i2c@1180000001200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001200 0x0 0x200>;
+ interrupts = <0 59>;
+ clock-frequency = <100000>;
+ };
+
+ uart0: serial@1180000000800 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000800 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 34>;
+ };
+
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 35>;
+ };
+
+ uart2: serial@1180000000400 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000400 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <1 16>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0x0 0x1d020000 0x10000>,
+ <5 0 0x0 0x1d040000 0x10000>,
+ <6 0 0x0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <20>;
+ cavium,t-ce = <60>;
+ cavium,t-oe = <60>;
+ cavium,t-we = <45>;
+ cavium,t-rd-hld = <35>;
+ cavium,t-wr-hld = <45>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <35>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@4 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <4>;
+ cavium,t-adr = <320>;
+ cavium,t-ce = <320>;
+ cavium,t-oe = <320>;
+ cavium,t-we = <320>;
+ cavium,t-rd-hld = <320>;
+ cavium,t-wr-hld = <320>;
+ cavium,t-pause = <320>;
+ cavium,t-wait = <320>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@5 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <5>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <30>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <30>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <16>;
+ };
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <270>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <70>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+
+ flash0: nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ led0: led-display@4,0 {
+ compatible = "avago,hdsp-253x";
+ reg = <4 0x20 0x20>, <4 0 0x20>;
+ };
+
+ cf0: compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
+ };
+
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+ dma1: dma-engine@1180000000108 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000108 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ uctl: uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ };
+
+ usbn: usbn@1180068000000 {
+ compatible = "cavium,octeon-5750-usbn";
+ reg = <0x11800 0x68000000 0x0 0x1000>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ usbc@16f0010000000 {
+ compatible = "cavium,octeon-5750-usbc";
+ reg = <0x16f00 0x10000000 0x0 0x80000>;
+ interrupts = <0 56>;
+ };
+ };
+ };
+
+ aliases {
+ mix0 = &mix0;
+ mix1 = &mix1;
+ pip = &pip;
+ smi0 = &smi0;
+ smi1 = &smi1;
+ twsi0 = &twsi0;
+ twsi1 = &twsi1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ flash0 = &flash0;
+ cf0 = &cf0;
+ uctl = &uctl;
+ usbn = &usbn;
+ led0 = &led0;
+ };
+ };
--- /dev/null
+/dts-v1/;
+/*
+ * OCTEON 68XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+ compatible = "cavium,octeon-6880";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu2>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu2: interrupt-controller@1070100000000 {
+ compatible = "cavium,octeon-6880-ciu2";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 7)
+ * 2) Bit within the register (0..63)
+ */
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x10701 0x00000000 0x0 0x4000000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pins connect to 16 consecutive CUI bits */
+ interrupts = <7 0>, <7 1>, <7 2>, <7 3>,
+ <7 4>, <7 5>, <7 6>, <7 7>,
+ <7 8>, <7 9>, <7 10>, <7 11>,
+ <7 12>, <7 13>, <7 14>, <7 15>;
+ };
+
+ smi0: mdio@1180000003800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003800 0x0 0x40>;
+
+ phy0: ethernet-phy@6 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <6>;
+ };
+
+ phy1: ethernet-phy@1 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy2: ethernet-phy@2 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000003880 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003880 0x0 0x40>;
+
+ phy41: ethernet-phy@1 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy42: ethernet-phy@2 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy43: ethernet-phy@3 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy44: ethernet-phy@4 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi2: mdio@1180000003900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003900 0x0 0x40>;
+
+ phy21: ethernet-phy@1 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy22: ethernet-phy@2 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy23: ethernet-phy@3 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy24: ethernet-phy@4 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi3: mdio@1180000003980 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003980 0x0 0x40>;
+
+ phy11: ethernet-phy@1 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy12: ethernet-phy@2 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy13: ethernet-phy@3 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy14: ethernet-phy@4 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <6 40>, <6 32>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@4 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy2>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy3>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy4>;
+ };
+ };
+
+ interface@3 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy11>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy12>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy13>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy14>;
+ };
+ };
+
+ interface@2 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy21>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy22>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy23>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy24>;
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy41>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy42>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy43>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy44>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <3 32>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
+
+ twsi1: i2c@1180000001200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001200 0x0 0x200>;
+ interrupts = <3 33>;
+ clock-frequency = <100000>;
+ };
+
+ uart0: serial@1180000000800 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000800 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <3 36>;
+ };
+
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <3 37>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0 0x1d020000 0x10000>,
+ <5 0 0 0x1d040000 0x10000>,
+ <6 0 0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <10>;
+ cavium,t-ce = <50>;
+ cavium,t-oe = <50>;
+ cavium,t-we = <35>;
+ cavium,t-rd-hld = <25>;
+ cavium,t-wr-hld = <35>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <300>;
+ cavium,t-page = <25>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@4 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <4>;
+ cavium,t-adr = <320>;
+ cavium,t-ce = <320>;
+ cavium,t-oe = <320>;
+ cavium,t-we = <320>;
+ cavium,t-rd-hld = <320>;
+ cavium,t-wr-hld = <320>;
+ cavium,t-pause = <320>;
+ cavium,t-wait = <320>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@5 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <5>;
+ cavium,t-adr = <0>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <300>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <300>;
+ cavium,t-page = <310>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <16>;
+ };
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <0>;
+ cavium,t-ce = <30>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <30>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <30>;
+ cavium,t-page = <310>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+
+ flash0: nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0 0x200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x200000>;
+ };
+ partition@400000 {
+ label = "cramfs";
+ reg = <0x400000 0x3fe000>;
+ };
+ partition@7fe000 {
+ label = "environment";
+ reg = <0x7fe000 0x2000>;
+ read-only;
+ };
+ };
+
+ led0: led-display@4,0 {
+ compatible = "avago,hdsp-253x";
+ reg = <4 0x20 0x20>, <4 0 0x20>;
+ };
+
+ compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
+ };
+
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+ dma1: dma-engine@1180000000108 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000108 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ uctl: uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <3 44>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <3 44>;
+ big-endian-regs;
+ };
+ };
+ };
+
+ aliases {
+ mix0 = &mix0;
+ pip = &pip;
+ smi0 = &smi0;
+ smi1 = &smi1;
+ smi2 = &smi2;
+ smi3 = &smi3;
+ twsi0 = &twsi0;
+ twsi1 = &twsi1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uctl = &uctl;
+ led0 = &led0;
+ flash0 = &flash0;
+ };
+ };
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,xway", "lantiq,danube";
-
- cpus {
- cpu@0 {
- compatible = "mips,mips24Kc";
- };
- };
-
- biu@1F800000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,biu", "simple-bus";
- reg = <0x1F800000 0x800000>;
- ranges = <0x0 0x1F800000 0x7FFFFF>;
-
- icu0: icu@80200 {
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "lantiq,icu";
- reg = <0x80200 0x120>;
- };
-
- watchdog@803F0 {
- compatible = "lantiq,wdt";
- reg = <0x803F0 0x10>;
- };
- };
-
- sram@1F000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,sram";
- reg = <0x1F000000 0x800000>;
- ranges = <0x0 0x1F000000 0x7FFFFF>;
-
- eiu0: eiu@101000 {
- #interrupt-cells = <1>;
- interrupt-controller;
- interrupt-parent;
- compatible = "lantiq,eiu-xway";
- reg = <0x101000 0x1000>;
- };
-
- pmu0: pmu@102000 {
- compatible = "lantiq,pmu-xway";
- reg = <0x102000 0x1000>;
- };
-
- cgu0: cgu@103000 {
- compatible = "lantiq,cgu-xway";
- reg = <0x103000 0x1000>;
- #clock-cells = <1>;
- };
-
- rcu0: rcu@203000 {
- compatible = "lantiq,rcu-xway";
- reg = <0x203000 0x1000>;
- };
- };
-
- fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "lantiq,fpi", "simple-bus";
- ranges = <0x0 0x10000000 0xEEFFFFF>;
- reg = <0x10000000 0xEF00000>;
-
- gptu@E100A00 {
- compatible = "lantiq,gptu-xway";
- reg = <0xE100A00 0x100>;
- };
-
- serial@E100C00 {
- compatible = "lantiq,asc";
- reg = <0xE100C00 0x400>;
- interrupt-parent = <&icu0>;
- interrupts = <112 113 114>;
- };
-
- dma0: dma@E104100 {
- compatible = "lantiq,dma-xway";
- reg = <0xE104100 0x800>;
- };
-
- ebu0: ebu@E105300 {
- compatible = "lantiq,ebu-xway";
- reg = <0xE105300 0x100>;
- };
-
- pci0: pci@E105400 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- compatible = "lantiq,pci-xway";
- bus-range = <0x0 0x0>;
- ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
- 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
- reg = <0x7000000 0x8000 /* config space */
- 0xE105400 0x400>; /* pci bridge */
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "danube.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- fpi@10000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- localbus@0 {
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
- 1 0 0x4000000 0x4000010>; /* addsel1 */
- compatible = "lantiq,localbus", "simple-bus";
-
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x10000>; /* 64 KB */
- };
-
- partition@10000 {
- label = "uboot_env";
- reg = <0x10000 0x10000>; /* 64 KB */
- };
-
- partition@20000 {
- label = "linux";
- reg = <0x20000 0x3d0000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x400000>;
- };
- };
- };
-
- gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xway";
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- #gpio-cells = <2>;
- gpio-controller;
- reg = <0xE100B10 0xA0>;
-
- state_default: pinmux {
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- };
- exin {
- lantiq,groups = "exin1";
- lantiq,function = "exin";
- };
- pci {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- };
- conf_out {
- lantiq,pins = "io4", "io5", "io6"; /* stp */
- lantiq,open-drain;
- lantiq,pull = <0>;
- };
- };
- };
-
- etop@E180000 {
- compatible = "lantiq,etop-xway";
- reg = <0xE180000 0x40000>;
- interrupt-parent = <&icu0>;
- interrupts = <73 78>;
- phy-mode = "rmii";
- mac-address = [ 00 11 22 33 44 55 ];
- };
-
- stp0: stp@E100BB0 {
- #gpio-cells = <2>;
- compatible = "lantiq,gpio-stp-xway";
- gpio-controller;
- reg = <0xE100BB0 0x40>;
-
- lantiq,shadow = <0xfff>;
- lantiq,groups = <0x3>;
- };
-
- pci@E105400 {
- lantiq,bus-clock = <33333333>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
- >;
- gpios-reset = <&gpio 21 0>;
- req-mask = <0x1>; /* GNT1 */
- };
-
- };
-};
--- /dev/null
+dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,danube";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24Kc";
+ };
+ };
+
+ biu@1F800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1F800000 0x800000>;
+ ranges = <0x0 0x1F800000 0x7FFFFF>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x120>;
+ };
+
+ watchdog@803F0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803F0 0x10>;
+ };
+ };
+
+ sram@1F000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram";
+ reg = <0x1F000000 0x800000>;
+ ranges = <0x0 0x1F000000 0x7FFFFF>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ gptu@E100A00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xE100A00 0x100>;
+ };
+
+ serial@E100C00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ dma0: dma@E104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xE104100 0x800>;
+ };
+
+ ebu0: ebu@E105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xE105300 0x100>;
+ };
+
+ pci0: pci@E105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xE105400 0x400>; /* pci bridge */
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xway";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
+ etop@E180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xE180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ phy-mode = "rmii";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ stp0: stp@E100BB0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xE100BB0 0x40>;
+
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+ };
+
+ pci@E105400 {
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+
+ };
+};
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ralink,mtk7620a-soc";
-
- cpus {
- cpu@0 {
- compatible = "mips,mips24KEc";
- };
- };
-
- cpuintc: cpuintc@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "mti,cpu-interrupt-controller";
- };
-
- palmbus@10000000 {
- compatible = "palmbus";
- reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysc@0 {
- compatible = "ralink,mt7620a-sysc";
- reg = <0x0 0x100>;
- };
-
- intc: intc@200 {
- compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
- };
-
- memc@300 {
- compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
- };
-
- uartlite@c00 {
- compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "mt7620a.dtsi"
-
-/ {
- compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
- model = "Ralink MT7620A evaluation board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-};
--- /dev/null
+dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000; // reserved
+/memreserve/ 0x00001000 0x000ef000; // ROM data
+/memreserve/ 0x000f0000 0x004cc000; // reserved
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mti,sead-3";
+
+ cpus {
+ cpu@0 {
+ compatible = "mti,mips14KEc", "mti,mips14Kc";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
--- /dev/null
+dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
+dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
+dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
+dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/*
+ * XLP8XX Device Tree Source for EVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-EVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@32000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x32100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@33000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x33100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
--- /dev/null
+/*
+ * XLP2XX Device Tree Source for FVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-FVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@37100 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x37100 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@37120 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x37120 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
--- /dev/null
+/*
+ * XLP9XX Device Tree Source for GVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-GVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x112100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ pic: pic@110000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x110000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
--- /dev/null
+/*
+ * XLP3XX Device Tree Source for SVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-SVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@32000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x32100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@33000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x33100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
+++ /dev/null
-/dts-v1/;
-/*
- * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
- *
- * This device tree is pruned and patched by early boot code before
- * use. Because of this, it contains a super-set of the available
- * devices and properties.
- */
-/ {
- compatible = "cavium,octeon-3860";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&ciu>;
-
- soc@0 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges; /* Direct mapping */
-
- ciu: interrupt-controller@1070000000000 {
- compatible = "cavium,octeon-3860-ciu";
- interrupt-controller;
- /* Interrupts are specified by two parts:
- * 1) Controller register (0 or 1)
- * 2) Bit within the register (0..63)
- */
- #interrupt-cells = <2>;
- reg = <0x10700 0x00000000 0x0 0x7000>;
- };
-
- gpio: gpio-controller@1070000000800 {
- #gpio-cells = <2>;
- compatible = "cavium,octeon-3860-gpio";
- reg = <0x10700 0x00000800 0x0 0x100>;
- gpio-controller;
- /* Interrupts are specified by two parts:
- * 1) GPIO pin number (0..15)
- * 2) Triggering (1 - edge rising
- * 2 - edge falling
- * 4 - level active high
- * 8 - level active low)
- */
- interrupt-controller;
- #interrupt-cells = <2>;
- /* The GPIO pin connect to 16 consecutive CUI bits */
- interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
- <0 20>, <0 21>, <0 22>, <0 23>,
- <0 24>, <0 25>, <0 26>, <0 27>,
- <0 28>, <0 29>, <0 30>, <0 31>;
- };
-
- smi0: mdio@1180000001800 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00001800 0x0 0x40>;
-
- phy0: ethernet-phy@0 {
- compatible = "marvell,88e1118";
- marvell,reg-init =
- /* Fix rx and tx clock transition timing */
- <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
- /* Adjust LED drive. */
- <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
- /* irq, blink-activity, blink-link */
- <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- compatible = "marvell,88e1118";
- marvell,reg-init =
- /* Fix rx and tx clock transition timing */
- <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
- /* Adjust LED drive. */
- <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
- /* irq, blink-activity, blink-link */
- <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
- reg = <1>;
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy3: ethernet-phy@3 {
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy4: ethernet-phy@4 {
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy5: ethernet-phy@5 {
- reg = <5>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
-
- phy6: ethernet-phy@6 {
- reg = <6>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy7: ethernet-phy@7 {
- reg = <7>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy8: ethernet-phy@8 {
- reg = <8>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy9: ethernet-phy@9 {
- reg = <9>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- };
-
- smi1: mdio@1180000001900 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00001900 0x0 0x40>;
-
- phy100: ethernet-phy@1 {
- reg = <1>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- interrupt-parent = <&gpio>;
- interrupts = <12 8>; /* Pin 12, active low */
- };
- phy101: ethernet-phy@2 {
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- interrupt-parent = <&gpio>;
- interrupts = <12 8>; /* Pin 12, active low */
- };
- phy102: ethernet-phy@3 {
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- interrupt-parent = <&gpio>;
- interrupts = <12 8>; /* Pin 12, active low */
- };
- phy103: ethernet-phy@4 {
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- interrupt-parent = <&gpio>;
- interrupts = <12 8>; /* Pin 12, active low */
- };
- };
-
- mix0: ethernet@1070000100000 {
- compatible = "cavium,octeon-5750-mix";
- reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
- <0x11800 0xE0000000 0x0 0x300>, /* AGL */
- <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
- <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
- cell-index = <0>;
- interrupts = <0 62>, <1 46>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy0>;
- };
-
- mix1: ethernet@1070000100800 {
- compatible = "cavium,octeon-5750-mix";
- reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
- <0x11800 0xE0000800 0x0 0x300>, /* AGL */
- <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
- <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
- cell-index = <1>;
- interrupts = <1 18>, < 1 46>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy1>;
- };
-
- pip: pip@11800a0000000 {
- compatible = "cavium,octeon-3860-pip";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0xa0000000 0x0 0x2000>;
-
- interface@0 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy2>;
- cavium,alt-phy-handle = <&phy100>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy3>;
- cavium,alt-phy-handle = <&phy101>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy4>;
- cavium,alt-phy-handle = <&phy102>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy5>;
- cavium,alt-phy-handle = <&phy103>;
- };
- ethernet@4 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x4>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@5 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x5>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@6 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x6>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@7 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x7>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@8 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x8>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@9 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x9>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@a {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xa>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@b {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xb>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@c {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xc>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@d {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xd>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@e {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xe>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@f {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0xf>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- interface@1 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy6>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy7>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy8>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy9>;
- };
- };
- };
-
- twsi0: i2c@1180000001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "cavium,octeon-3860-twsi";
- reg = <0x11800 0x00001000 0x0 0x200>;
- interrupts = <0 45>;
- clock-frequency = <100000>;
-
- rtc@68 {
- compatible = "dallas,ds1337";
- reg = <0x68>;
- };
- tmp@4c {
- compatible = "ti,tmp421";
- reg = <0x4c>;
- };
- };
-
- twsi1: i2c@1180000001200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "cavium,octeon-3860-twsi";
- reg = <0x11800 0x00001200 0x0 0x200>;
- interrupts = <0 59>;
- clock-frequency = <100000>;
- };
-
- uart0: serial@1180000000800 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000800 0x0 0x400>;
- clock-frequency = <0>;
- current-speed = <115200>;
- reg-shift = <3>;
- interrupts = <0 34>;
- };
-
- uart1: serial@1180000000c00 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000c00 0x0 0x400>;
- clock-frequency = <0>;
- current-speed = <115200>;
- reg-shift = <3>;
- interrupts = <0 35>;
- };
-
- uart2: serial@1180000000400 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000400 0x0 0x400>;
- clock-frequency = <0>;
- current-speed = <115200>;
- reg-shift = <3>;
- interrupts = <1 16>;
- };
-
- bootbus: bootbus@1180000000000 {
- compatible = "cavium,octeon-3860-bootbus";
- reg = <0x11800 0x00000000 0x0 0x200>;
- /* The chip select number and offset */
- #address-cells = <2>;
- /* The size of the chip select region */
- #size-cells = <1>;
- ranges = <0 0 0x0 0x1f400000 0xc00000>,
- <1 0 0x10000 0x30000000 0>,
- <2 0 0x10000 0x40000000 0>,
- <3 0 0x10000 0x50000000 0>,
- <4 0 0x0 0x1d020000 0x10000>,
- <5 0 0x0 0x1d040000 0x10000>,
- <6 0 0x0 0x1d050000 0x10000>,
- <7 0 0x10000 0x90000000 0>;
-
- cavium,cs-config@0 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <0>;
- cavium,t-adr = <20>;
- cavium,t-ce = <60>;
- cavium,t-oe = <60>;
- cavium,t-we = <45>;
- cavium,t-rd-hld = <35>;
- cavium,t-wr-hld = <45>;
- cavium,t-pause = <0>;
- cavium,t-wait = <0>;
- cavium,t-page = <35>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <8>;
- };
- cavium,cs-config@4 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <4>;
- cavium,t-adr = <320>;
- cavium,t-ce = <320>;
- cavium,t-oe = <320>;
- cavium,t-we = <320>;
- cavium,t-rd-hld = <320>;
- cavium,t-wr-hld = <320>;
- cavium,t-pause = <320>;
- cavium,t-wait = <320>;
- cavium,t-page = <320>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <8>;
- };
- cavium,cs-config@5 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <5>;
- cavium,t-adr = <5>;
- cavium,t-ce = <300>;
- cavium,t-oe = <125>;
- cavium,t-we = <150>;
- cavium,t-rd-hld = <100>;
- cavium,t-wr-hld = <30>;
- cavium,t-pause = <0>;
- cavium,t-wait = <30>;
- cavium,t-page = <320>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <16>;
- };
- cavium,cs-config@6 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <6>;
- cavium,t-adr = <5>;
- cavium,t-ce = <300>;
- cavium,t-oe = <270>;
- cavium,t-we = <150>;
- cavium,t-rd-hld = <100>;
- cavium,t-wr-hld = <70>;
- cavium,t-pause = <0>;
- cavium,t-wait = <0>;
- cavium,t-page = <320>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,wait-mode;
- cavium,bus-width = <16>;
- };
-
- flash0: nor@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- };
-
- led0: led-display@4,0 {
- compatible = "avago,hdsp-253x";
- reg = <4 0x20 0x20>, <4 0 0x20>;
- };
-
- cf0: compact-flash@5,0 {
- compatible = "cavium,ebt3000-compact-flash";
- reg = <5 0 0x10000>, <6 0 0x10000>;
- cavium,bus-width = <16>;
- cavium,true-ide;
- cavium,dma-engine-handle = <&dma0>;
- };
- };
-
- dma0: dma-engine@1180000000100 {
- compatible = "cavium,octeon-5750-bootbus-dma";
- reg = <0x11800 0x00000100 0x0 0x8>;
- interrupts = <0 63>;
- };
- dma1: dma-engine@1180000000108 {
- compatible = "cavium,octeon-5750-bootbus-dma";
- reg = <0x11800 0x00000108 0x0 0x8>;
- interrupts = <0 63>;
- };
-
- uctl: uctl@118006f000000 {
- compatible = "cavium,octeon-6335-uctl";
- reg = <0x11800 0x6f000000 0x0 0x100>;
- ranges; /* Direct mapping */
- #address-cells = <2>;
- #size-cells = <2>;
- /* 12MHz, 24MHz and 48MHz allowed */
- refclk-frequency = <12000000>;
- /* Either "crystal" or "external" */
- refclk-type = "crystal";
-
- ehci@16f0000000000 {
- compatible = "cavium,octeon-6335-ehci","usb-ehci";
- reg = <0x16f00 0x00000000 0x0 0x100>;
- interrupts = <0 56>;
- big-endian-regs;
- };
- ohci@16f0000000400 {
- compatible = "cavium,octeon-6335-ohci","usb-ohci";
- reg = <0x16f00 0x00000400 0x0 0x100>;
- interrupts = <0 56>;
- big-endian-regs;
- };
- };
-
- usbn: usbn@1180068000000 {
- compatible = "cavium,octeon-5750-usbn";
- reg = <0x11800 0x68000000 0x0 0x1000>;
- ranges; /* Direct mapping */
- #address-cells = <2>;
- #size-cells = <2>;
- /* 12MHz, 24MHz and 48MHz allowed */
- refclk-frequency = <12000000>;
- /* Either "crystal" or "external" */
- refclk-type = "crystal";
-
- usbc@16f0010000000 {
- compatible = "cavium,octeon-5750-usbc";
- reg = <0x16f00 0x10000000 0x0 0x80000>;
- interrupts = <0 56>;
- };
- };
- };
-
- aliases {
- mix0 = &mix0;
- mix1 = &mix1;
- pip = &pip;
- smi0 = &smi0;
- smi1 = &smi1;
- twsi0 = &twsi0;
- twsi1 = &twsi1;
- uart0 = &uart0;
- uart1 = &uart1;
- uart2 = &uart2;
- flash0 = &flash0;
- cf0 = &cf0;
- uctl = &uctl;
- usbn = &usbn;
- led0 = &led0;
- };
- };
+++ /dev/null
-/dts-v1/;
-/*
- * OCTEON 68XX device tree skeleton.
- *
- * This device tree is pruned and patched by early boot code before
- * use. Because of this, it contains a super-set of the available
- * devices and properties.
- */
-/ {
- compatible = "cavium,octeon-6880";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&ciu2>;
-
- soc@0 {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges; /* Direct mapping */
-
- ciu2: interrupt-controller@1070100000000 {
- compatible = "cavium,octeon-6880-ciu2";
- interrupt-controller;
- /* Interrupts are specified by two parts:
- * 1) Controller register (0 or 7)
- * 2) Bit within the register (0..63)
- */
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x10701 0x00000000 0x0 0x4000000>;
- };
-
- gpio: gpio-controller@1070000000800 {
- #gpio-cells = <2>;
- compatible = "cavium,octeon-3860-gpio";
- reg = <0x10700 0x00000800 0x0 0x100>;
- gpio-controller;
- /* Interrupts are specified by two parts:
- * 1) GPIO pin number (0..15)
- * 2) Triggering (1 - edge rising
- * 2 - edge falling
- * 4 - level active high
- * 8 - level active low)
- */
- interrupt-controller;
- #interrupt-cells = <2>;
- /* The GPIO pins connect to 16 consecutive CUI bits */
- interrupts = <7 0>, <7 1>, <7 2>, <7 3>,
- <7 4>, <7 5>, <7 6>, <7 7>,
- <7 8>, <7 9>, <7 10>, <7 11>,
- <7 12>, <7 13>, <7 14>, <7 15>;
- };
-
- smi0: mdio@1180000003800 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00003800 0x0 0x40>;
-
- phy0: ethernet-phy@6 {
- compatible = "marvell,88e1118";
- marvell,reg-init =
- /* Fix rx and tx clock transition timing */
- <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
- /* Adjust LED drive. */
- <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
- /* irq, blink-activity, blink-link */
- <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
- reg = <6>;
- };
-
- phy1: ethernet-phy@1 {
- cavium,qlm-trim = "4,sgmii";
- reg = <1>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy2: ethernet-phy@2 {
- cavium,qlm-trim = "4,sgmii";
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy3: ethernet-phy@3 {
- cavium,qlm-trim = "4,sgmii";
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy4: ethernet-phy@4 {
- cavium,qlm-trim = "4,sgmii";
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- };
-
- smi1: mdio@1180000003880 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00003880 0x0 0x40>;
-
- phy41: ethernet-phy@1 {
- cavium,qlm-trim = "0,sgmii";
- reg = <1>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy42: ethernet-phy@2 {
- cavium,qlm-trim = "0,sgmii";
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy43: ethernet-phy@3 {
- cavium,qlm-trim = "0,sgmii";
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy44: ethernet-phy@4 {
- cavium,qlm-trim = "0,sgmii";
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- };
-
- smi2: mdio@1180000003900 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00003900 0x0 0x40>;
-
- phy21: ethernet-phy@1 {
- cavium,qlm-trim = "2,sgmii";
- reg = <1>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy22: ethernet-phy@2 {
- cavium,qlm-trim = "2,sgmii";
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy23: ethernet-phy@3 {
- cavium,qlm-trim = "2,sgmii";
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy24: ethernet-phy@4 {
- cavium,qlm-trim = "2,sgmii";
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- };
-
- smi3: mdio@1180000003980 {
- compatible = "cavium,octeon-3860-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0x00003980 0x0 0x40>;
-
- phy11: ethernet-phy@1 {
- cavium,qlm-trim = "3,sgmii";
- reg = <1>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy12: ethernet-phy@2 {
- cavium,qlm-trim = "3,sgmii";
- reg = <2>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy13: ethernet-phy@3 {
- cavium,qlm-trim = "3,sgmii";
- reg = <3>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- phy14: ethernet-phy@4 {
- cavium,qlm-trim = "3,sgmii";
- reg = <4>;
- compatible = "marvell,88e1149r";
- marvell,reg-init = <3 0x10 0 0x5777>,
- <3 0x11 0 0x00aa>,
- <3 0x12 0 0x4105>,
- <3 0x13 0 0x0a60>;
- };
- };
-
- mix0: ethernet@1070000100000 {
- compatible = "cavium,octeon-5750-mix";
- reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
- <0x11800 0xE0000000 0x0 0x300>, /* AGL */
- <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
- <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
- cell-index = <0>;
- interrupts = <6 40>, <6 32>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy0>;
- };
-
- pip: pip@11800a0000000 {
- compatible = "cavium,octeon-3860-pip";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x11800 0xa0000000 0x0 0x2000>;
-
- interface@4 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x4>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy1>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy2>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy3>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy4>;
- };
- };
-
- interface@3 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy11>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy12>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy13>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy14>;
- };
- };
-
- interface@2 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy21>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy22>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy23>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy24>;
- };
- };
-
- interface@1 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- interface@0 {
- compatible = "cavium,octeon-3860-pip-interface";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0>; /* interface */
-
- ethernet@0 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x0>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy41>;
- };
- ethernet@1 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x1>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy42>;
- };
- ethernet@2 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x2>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy43>;
- };
- ethernet@3 {
- compatible = "cavium,octeon-3860-pip-port";
- reg = <0x3>; /* Port */
- local-mac-address = [ 00 00 00 00 00 00 ];
- phy-handle = <&phy44>;
- };
- };
- };
-
- twsi0: i2c@1180000001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "cavium,octeon-3860-twsi";
- reg = <0x11800 0x00001000 0x0 0x200>;
- interrupts = <3 32>;
- clock-frequency = <100000>;
-
- rtc@68 {
- compatible = "dallas,ds1337";
- reg = <0x68>;
- };
- tmp@4c {
- compatible = "ti,tmp421";
- reg = <0x4c>;
- };
- };
-
- twsi1: i2c@1180000001200 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "cavium,octeon-3860-twsi";
- reg = <0x11800 0x00001200 0x0 0x200>;
- interrupts = <3 33>;
- clock-frequency = <100000>;
- };
-
- uart0: serial@1180000000800 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000800 0x0 0x400>;
- clock-frequency = <0>;
- current-speed = <115200>;
- reg-shift = <3>;
- interrupts = <3 36>;
- };
-
- uart1: serial@1180000000c00 {
- compatible = "cavium,octeon-3860-uart","ns16550";
- reg = <0x11800 0x00000c00 0x0 0x400>;
- clock-frequency = <0>;
- current-speed = <115200>;
- reg-shift = <3>;
- interrupts = <3 37>;
- };
-
- bootbus: bootbus@1180000000000 {
- compatible = "cavium,octeon-3860-bootbus";
- reg = <0x11800 0x00000000 0x0 0x200>;
- /* The chip select number and offset */
- #address-cells = <2>;
- /* The size of the chip select region */
- #size-cells = <1>;
- ranges = <0 0 0 0x1f400000 0xc00000>,
- <1 0 0x10000 0x30000000 0>,
- <2 0 0x10000 0x40000000 0>,
- <3 0 0x10000 0x50000000 0>,
- <4 0 0 0x1d020000 0x10000>,
- <5 0 0 0x1d040000 0x10000>,
- <6 0 0 0x1d050000 0x10000>,
- <7 0 0x10000 0x90000000 0>;
-
- cavium,cs-config@0 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <0>;
- cavium,t-adr = <10>;
- cavium,t-ce = <50>;
- cavium,t-oe = <50>;
- cavium,t-we = <35>;
- cavium,t-rd-hld = <25>;
- cavium,t-wr-hld = <35>;
- cavium,t-pause = <0>;
- cavium,t-wait = <300>;
- cavium,t-page = <25>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <8>;
- };
- cavium,cs-config@4 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <4>;
- cavium,t-adr = <320>;
- cavium,t-ce = <320>;
- cavium,t-oe = <320>;
- cavium,t-we = <320>;
- cavium,t-rd-hld = <320>;
- cavium,t-wr-hld = <320>;
- cavium,t-pause = <320>;
- cavium,t-wait = <320>;
- cavium,t-page = <320>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <8>;
- };
- cavium,cs-config@5 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <5>;
- cavium,t-adr = <0>;
- cavium,t-ce = <300>;
- cavium,t-oe = <125>;
- cavium,t-we = <150>;
- cavium,t-rd-hld = <100>;
- cavium,t-wr-hld = <300>;
- cavium,t-pause = <0>;
- cavium,t-wait = <300>;
- cavium,t-page = <310>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,bus-width = <16>;
- };
- cavium,cs-config@6 {
- compatible = "cavium,octeon-3860-bootbus-config";
- cavium,cs-index = <6>;
- cavium,t-adr = <0>;
- cavium,t-ce = <30>;
- cavium,t-oe = <125>;
- cavium,t-we = <150>;
- cavium,t-rd-hld = <100>;
- cavium,t-wr-hld = <30>;
- cavium,t-pause = <0>;
- cavium,t-wait = <30>;
- cavium,t-page = <310>;
- cavium,t-rd-dly = <0>;
-
- cavium,pages = <0>;
- cavium,wait-mode;
- cavium,bus-width = <16>;
- };
-
- flash0: nor@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader";
- reg = <0 0x200000>;
- read-only;
- };
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x200000>;
- };
- partition@400000 {
- label = "cramfs";
- reg = <0x400000 0x3fe000>;
- };
- partition@7fe000 {
- label = "environment";
- reg = <0x7fe000 0x2000>;
- read-only;
- };
- };
-
- led0: led-display@4,0 {
- compatible = "avago,hdsp-253x";
- reg = <4 0x20 0x20>, <4 0 0x20>;
- };
-
- compact-flash@5,0 {
- compatible = "cavium,ebt3000-compact-flash";
- reg = <5 0 0x10000>, <6 0 0x10000>;
- cavium,bus-width = <16>;
- cavium,true-ide;
- cavium,dma-engine-handle = <&dma0>;
- };
- };
-
- dma0: dma-engine@1180000000100 {
- compatible = "cavium,octeon-5750-bootbus-dma";
- reg = <0x11800 0x00000100 0x0 0x8>;
- interrupts = <0 63>;
- };
- dma1: dma-engine@1180000000108 {
- compatible = "cavium,octeon-5750-bootbus-dma";
- reg = <0x11800 0x00000108 0x0 0x8>;
- interrupts = <0 63>;
- };
-
- uctl: uctl@118006f000000 {
- compatible = "cavium,octeon-6335-uctl";
- reg = <0x11800 0x6f000000 0x0 0x100>;
- ranges; /* Direct mapping */
- #address-cells = <2>;
- #size-cells = <2>;
- /* 12MHz, 24MHz and 48MHz allowed */
- refclk-frequency = <12000000>;
- /* Either "crystal" or "external" */
- refclk-type = "crystal";
-
- ehci@16f0000000000 {
- compatible = "cavium,octeon-6335-ehci","usb-ehci";
- reg = <0x16f00 0x00000000 0x0 0x100>;
- interrupts = <3 44>;
- big-endian-regs;
- };
- ohci@16f0000000400 {
- compatible = "cavium,octeon-6335-ohci","usb-ohci";
- reg = <0x16f00 0x00000400 0x0 0x100>;
- interrupts = <3 44>;
- big-endian-regs;
- };
- };
- };
-
- aliases {
- mix0 = &mix0;
- pip = &pip;
- smi0 = &smi0;
- smi1 = &smi1;
- smi2 = &smi2;
- smi3 = &smi3;
- twsi0 = &twsi0;
- twsi1 = &twsi1;
- uart0 = &uart0;
- uart1 = &uart1;
- uctl = &uctl;
- led0 = &led0;
- flash0 = &flash0;
- };
- };
--- /dev/null
+dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
+dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
+dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
+dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mtk7620a-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,mt7620a-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+ model = "Ralink MT7620A evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@300000 {
+ compatible = "palmbus";
+ reg = <0x300000 0x200000>;
+ ranges = <0x0 0x300000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt2880-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt2880-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ reg-shift = <2>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+ model = "Ralink RT2880 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x8000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+
+ usb@101c0000 {
+ compatible = "ralink,rt3050-usb", "snps,dwc2";
+ reg = <0x101c0000 40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+/ {
+ compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+ model = "Ralink RT3052 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ usb@101c0000 {
+ status = "ok";
+ };
+};
--- /dev/null
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3883-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips74Kc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+ compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
+ model = "Ralink RT3883 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ralink,rt2880-soc";
-
- cpus {
- cpu@0 {
- compatible = "mips,mips4KEc";
- };
- };
-
- cpuintc: cpuintc@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "mti,cpu-interrupt-controller";
- };
-
- palmbus@300000 {
- compatible = "palmbus";
- reg = <0x300000 0x200000>;
- ranges = <0x0 0x300000 0x1FFFFF>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysc@0 {
- compatible = "ralink,rt2880-sysc";
- reg = <0x0 0x100>;
- };
-
- intc: intc@200 {
- compatible = "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
- };
-
- memc@300 {
- compatible = "ralink,rt2880-memc";
- reg = <0x300 0x100>;
- };
-
- uartlite@c00 {
- compatible = "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
- interrupt-parent = <&intc>;
- interrupts = <8>;
-
- reg-shift = <2>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "rt2880.dtsi"
-
-/ {
- compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
- model = "Ralink RT2880 evaluation board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x8000000 0x2000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x400000>;
-
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
- partition@40000 {
- label = "calibration";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "linux";
- reg = <0x50000 0x3b0000>;
- };
- };
-};
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
-
- cpus {
- cpu@0 {
- compatible = "mips,mips24KEc";
- };
- };
-
- cpuintc: cpuintc@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "mti,cpu-interrupt-controller";
- };
-
- palmbus@10000000 {
- compatible = "palmbus";
- reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysc@0 {
- compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
- reg = <0x0 0x100>;
- };
-
- intc: intc@200 {
- compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
- };
-
- memc@300 {
- compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
- };
-
- uartlite@c00 {
- compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
- };
-
- usb@101c0000 {
- compatible = "ralink,rt3050-usb", "snps,dwc2";
- reg = <0x101c0000 40000>;
-
- interrupt-parent = <&intc>;
- interrupts = <18>;
-
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-/ {
- compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
- model = "Ralink RT3052 evaluation board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
- cfi@1f000000 {
- compatible = "cfi-flash";
- reg = <0x1f000000 0x800000>;
-
- bank-width = <2>;
- device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
- partition@40000 {
- label = "calibration";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "linux";
- reg = <0x50000 0x7b0000>;
- };
- };
-
- usb@101c0000 {
- status = "ok";
- };
-};
+++ /dev/null
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "ralink,rt3883-soc";
-
- cpus {
- cpu@0 {
- compatible = "mips,mips74Kc";
- };
- };
-
- cpuintc: cpuintc@0 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- compatible = "mti,cpu-interrupt-controller";
- };
-
- palmbus@10000000 {
- compatible = "palmbus";
- reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- sysc@0 {
- compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
- reg = <0x0 0x100>;
- };
-
- intc: intc@200 {
- compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
- reg = <0x200 0x100>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpuintc>;
- interrupts = <2>;
- };
-
- memc@300 {
- compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
- reg = <0x300 0x100>;
- };
-
- uartlite@c00 {
- compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
- reg = <0xc00 0x100>;
-
- interrupt-parent = <&intc>;
- interrupts = <12>;
-
- reg-shift = <2>;
- };
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ "rt3883.dtsi"
-
-/ {
- compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
- model = "Ralink RT3883 evaluation board";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x2000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00001000; // reserved
-/memreserve/ 0x00001000 0x000ef000; // ROM data
-/memreserve/ 0x000f0000 0x004cc000; // reserved
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "mti,sead-3";
-
- cpus {
- cpu@0 {
- compatible = "mti,mips14KEc", "mti,mips14Kc";
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
+++ /dev/null
-/*
- * XLP8XX Device Tree Source for EVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-EVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@32000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x32100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@33000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x33100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
+++ /dev/null
-/*
- * XLP2XX Device Tree Source for FVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-FVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@37100 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x37100 0x20>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@37120 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x37120 0x20>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
+++ /dev/null
-/*
- * XLP9XX Device Tree Source for GVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-GVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x112100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <125000000>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- pic: pic@110000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x110000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
-
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
+++ /dev/null
-/*
- * XLP3XX Device Tree Source for SVP boards
- */
-
-/dts-v1/;
-/ {
- model = "netlogic,XLP-SVP";
- compatible = "netlogic,xlp";
- #address-cells = <2>;
- #size-cells = <2>;
-
- soc {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
- 1 0 0 0x16000000 0x02000000>; // GBU chipselects
-
- serial0: serial@30000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x30100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <17>;
- };
- serial1: serial@31000 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0 0x31100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <133333333>;
- interrupt-parent = <&pic>;
- interrupts = <18>;
- };
- i2c0: ocores@32000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x32100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <30>;
- };
- i2c1: ocores@33000 {
- compatible = "opencores,i2c-ocores";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0 0x33100 0xa00>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clock-frequency = <32000000>;
- interrupt-parent = <&pic>;
- interrupts = <31>;
-
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
- };
-
- dtt@4c {
- compatible = "national,lm90";
- reg = <0x4c>;
- };
- };
- pic: pic@4000 {
- compatible = "netlogic,xlp-pic";
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0 0x4000 0x200>;
- interrupt-controller;
- };
-
- nor_flash@1,0 {
- compatible = "cfi-flash";
- #address-cells = <1>;
- #size-cells = <1>;
- bank-width = <2>;
- reg = <1 0 0x1000000>;
-
- partition@0 {
- label = "x-loader";
- reg = <0x0 0x100000>; /* 1M */
- read-only;
- };
-
- partition@100000 {
- label = "u-boot";
- reg = <0x100000 0x100000>; /* 1M */
- };
-
- partition@200000 {
- label = "kernel";
- reg = <0x200000 0x500000>; /* 5M */
- };
-
- partition@700000 {
- label = "rootfs";
- reg = <0x700000 0x800000>; /* 8M */
- };
-
- partition@f00000 {
- label = "env";
- reg = <0xf00000 0x100000>; /* 1M */
- read-only;
- };
- };
- };
-
- chosen {
- bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
- };
-};
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff