[media] saa7115: Fix saa711x_set_v4lstd for gm7113c

saa711x_set_v4lstd would toggle several bits that should not be touched
when changing std. This patch fixes this.

Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index 7fd766ec64c8d5059f01e593dd52c6479ccc21dd..41408ddda79bb5878283dc5f7648c2eafa26bc86 100644 (file)
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -462,24 +462,6 @@ static const unsigned char saa7115_cfg_50hz_video[] = {
 
 /* ============== SAA7715 VIDEO templates (end) =======  */
 
-/* ============== GM7113C VIDEO templates =============  */
-static const unsigned char gm7113c_cfg_60hz_video[] = {
-       R_08_SYNC_CNTL, 0x68,                   /* 0xBO: auto detection, 0x68 = NTSC */
-       R_0E_CHROMA_CNTL_1, 0x07,               /* video autodetection is on */
-
-       0x00, 0x00
-};
-
-static const unsigned char gm7113c_cfg_50hz_video[] = {
-       R_08_SYNC_CNTL, 0x28,                   /* 0x28 = PAL */
-       R_0E_CHROMA_CNTL_1, 0x07,
-
-       0x00, 0x00
-};
-
-/* ============== GM7113C VIDEO templates (end) =======  */
-
-
 static const unsigned char saa7115_cfg_vbi_on[] = {
        R_80_GLOBAL_CNTL_1, 0x00,                       /* reset tasks */
        R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,            /* reset scaler */
@@ -964,17 +946,24 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
        // This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
        if (std & V4L2_STD_525_60) {
                v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
-               if (state->ident == GM7113C)
-                       saa711x_writeregs(sd, gm7113c_cfg_60hz_video);
-               else
+               if (state->ident == GM7113C) {
+                       u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+                       reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+                       reg |= SAA7113_R_08_FSEL;
+                       saa711x_write(sd, R_08_SYNC_CNTL, reg);
+               } else {
                        saa711x_writeregs(sd, saa7115_cfg_60hz_video);
+               }
                saa711x_set_size(sd, 720, 480);
        } else {
                v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
-               if (state->ident == GM7113C)
-                       saa711x_writeregs(sd, gm7113c_cfg_50hz_video);
-               else
+               if (state->ident == GM7113C) {
+                       u8 reg = saa711x_read(sd, R_08_SYNC_CNTL);
+                       reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD);
+                       saa711x_write(sd, R_08_SYNC_CNTL, reg);
+               } else {
                        saa711x_writeregs(sd, saa7115_cfg_50hz_video);
+               }
                saa711x_set_size(sd, 720, 576);
        }
 

diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h
index 4e5f2eb0a2c12b91ca913d13e15f4395acff772d..70c56d19ea069a7f9f5d1138406de4646d9ac7a4 100644 (file)
--- a/drivers/media/i2c/saa711x_regs.h
+++ b/drivers/media/i2c/saa711x_regs.h
@@ -201,6 +201,10 @@
 #define R_FB_PULSE_C_POS_MSB                          0xfb
 #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES     0xff
 
+/* SAA7113 bit-masks */
+#define SAA7113_R_08_FSEL 0x40
+#define SAA7113_R_08_AUFD 0x80
+
 #if 0
 /* Those structs will be used in the future for debug purposes */
 struct saa711x_reg_descr {