igb: Add loopback test support for i210
authorCarolyn Wyborny <carolyn.wyborny@intel.com>
Fri, 8 Jun 2012 05:01:39 +0000 (05:01 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 5 Sep 2012 05:43:59 +0000 (22:43 -0700)
Early release of i210 devices had the loopback test of the ethtool
self-test disabled. This patch enables the loopback test for i210 devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/igb/igb_ethtool.c

index be02168f1308872fa49d86dfcad77b0ab5f91246..c4def55567f57ed1a1c3e15d69ee989b87087529 100644 (file)
@@ -1511,33 +1511,22 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
 {
        struct e1000_hw *hw = &adapter->hw;
        u32 ctrl_reg = 0;
-       u16 phy_reg = 0;
 
        hw->mac.autoneg = false;
 
-       switch (hw->phy.type) {
-       case e1000_phy_m88:
-               /* Auto-MDI/MDIX Off */
-               igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
-               /* reset to update Auto-MDI/MDIX */
-               igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
-               /* autoneg off */
-               igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
-               break;
-       case e1000_phy_82580:
-               /* enable MII loopback */
-               igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
-               break;
-       case e1000_phy_i210:
-               /* set loopback speed in PHY */
-               igb_read_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
-                                       &phy_reg);
-               phy_reg |= GS40G_MAC_SPEED_1G;
-               igb_write_phy_reg(hw, (GS40G_PAGE_SELECT & GS40G_PAGE_2),
-                                       phy_reg);
-               ctrl_reg = rd32(E1000_CTRL_EXT);
-       default:
-               break;
+       if (hw->phy.type == e1000_phy_m88) {
+               if (hw->phy.id != I210_I_PHY_ID) {
+                       /* Auto-MDI/MDIX Off */
+                       igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+                       /* reset to update Auto-MDI/MDIX */
+                       igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
+                       /* autoneg off */
+                       igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+               } else {
+                       /* force 1000, set loopback  */
+                       igb_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0);
+                       igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+               }
        }
 
        /* add small delay to avoid loopback test failure */
@@ -1555,7 +1544,7 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
                     E1000_CTRL_FD |     /* Force Duplex to FULL */
                     E1000_CTRL_SLU);    /* Set link up enable bit */
 
-       if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
+       if (hw->phy.type == e1000_phy_m88)
                ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
 
        wr32(E1000_CTRL, ctrl_reg);
@@ -1563,11 +1552,10 @@ static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
        /* Disable the receiver on the PHY so when a cable is plugged in, the
         * PHY does not begin to autoneg when a cable is reconnected to the NIC.
         */
-       if ((hw->phy.type == e1000_phy_m88) || (hw->phy.type == e1000_phy_i210))
+       if (hw->phy.type == e1000_phy_m88)
                igb_phy_disable_receiver(adapter);
 
-       udelay(500);
-
+       mdelay(500);
        return 0;
 }
 
@@ -1827,13 +1815,6 @@ static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
                *data = 0;
                goto out;
        }
-       if ((adapter->hw.mac.type == e1000_i210)
-               || (adapter->hw.mac.type == e1000_i211)) {
-               dev_err(&adapter->pdev->dev,
-                       "Loopback test not supported on this part at this time.\n");
-               *data = 0;
-               goto out;
-       }
        *data = igb_setup_desc_rings(adapter);
        if (*data)
                goto out;