ARM: n30: Fixup gpiolib calls for mmc power

Move to using gpio_request() and gpio_set_value() for the MMC power
control calls.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index f25275ef8bc8e452d6d8562b621b8e20eca28096..dfa09eac160c5ba3cef400e1b28aaefa46c8dda6 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -88,10 +88,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
        switch (cmd) {
        case S3C2410_UDC_P_ENABLE :
-               s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
+               gpio_set_value(S3C2410_GPB(3), 1);
                break;
        case S3C2410_UDC_P_DISABLE :
-               s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
+               gpio_set_value(S3C2410_GPB(3), 0);
                break;
        case S3C2410_UDC_P_RESET :
                break;
@@ -357,11 +357,11 @@ static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
        switch (power_mode) {
        case MMC_POWER_ON:
        case MMC_POWER_UP:
-               s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
+               gpio_set_value(S3C2410_GPG(4), 1);
                break;
        case MMC_POWER_OFF:
        default:
-               s3c2410_gpio_setpin(S3C2410_GPG(4), 0);
+               gpio_set_value(S3C2410_GPG(4), 0);
                break;
        }
 }
@@ -561,6 +561,8 @@ static void __init n30_init_irq(void)
 
 static void __init n30_init(void)
 {
+       WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
        s3c24xx_fb_set_platdata(&n30_fb_info);
        s3c24xx_udc_set_platdata(&n30_udc_cfg);
        s3c24xx_mci_set_platdata(&n30_mci_cfg);