return 0;
}
-static void p54_sta_notify_ps(struct ieee80211_hw *dev,
- enum sta_notify_ps_cmd notify_cmd,
- struct ieee80211_sta *sta)
-{
- switch (notify_cmd) {
- case STA_NOTIFY_AWAKE:
- p54_sta_unlock(dev, sta->addr);
- break;
- default:
- break;
- }
-}
-
static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif,
enum sta_notify_cmd notify_cmd,
struct ieee80211_sta *sta)
* need to buffer frames for this station anymore.
*/
+ p54_sta_unlock(dev, sta->addr);
+ break;
+ case STA_NOTIFY_AWAKE:
+ /* update the firmware's filter table */
p54_sta_unlock(dev, sta->addr);
break;
default:
.add_interface = p54_add_interface,
.remove_interface = p54_remove_interface,
.set_tim = p54_set_tim,
- .sta_notify_ps = p54_sta_notify_ps,
.sta_notify = p54_sta_notify,
.set_key = p54_set_key,
.config = p54_config,
* enum sta_notify_cmd - sta notify command
*
* Used with the sta_notify() callback in &struct ieee80211_ops, this
- * indicates addition and removal of a station to station table.
+ * indicates addition and removal of a station to station table,
+ * or if a associated station made a power state transition.
*
* @STA_NOTIFY_ADD: a station was added to the station table
* @STA_NOTIFY_REMOVE: a station being removed from the station table
- */
-enum sta_notify_cmd {
- STA_NOTIFY_ADD, STA_NOTIFY_REMOVE
-};
-
-/**
- * enum sta_notify_ps_cmd - sta power save notify command
- *
- * Used with the sta_notify_ps() callback in &struct ieee80211_ops to
- * notify the driver if a station made a power state transition.
- *
* @STA_NOTIFY_SLEEP: a station is now sleeping
* @STA_NOTIFY_AWAKE: a sleeping station woke up
*/
-enum sta_notify_ps_cmd {
+enum sta_notify_cmd {
+ STA_NOTIFY_ADD, STA_NOTIFY_REMOVE,
STA_NOTIFY_SLEEP, STA_NOTIFY_AWAKE,
};
*
* @set_rts_threshold: Configuration of RTS threshold (if device needs it)
*
- * @sta_notify: Notifies low level driver about addition or removal of an
- * associated station, AP, IBSS/WDS/mesh peer etc. Must be atomic.
- *
- * @sta_ps_notify: Notifies low level driver about the power state transition
- * of a associated station. Must be atomic.
+ * @sta_notify: Notifies low level driver about addition, removal or power
+ * state transition of an associated station, AP, IBSS/WDS/mesh peer etc.
+ * Must be atomic.
*
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
- void (*sta_notify_ps)(struct ieee80211_hw *hw,
- enum sta_notify_ps_cmd, struct ieee80211_sta *sta);
int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
int (*get_tx_stats)(struct ieee80211_hw *hw,
atomic_inc(&sdata->bss->num_sta_ps);
set_and_clear_sta_flags(sta, WLAN_STA_PS, WLAN_STA_PSPOLL);
- if (local->ops->sta_notify_ps)
- local->ops->sta_notify_ps(local_to_hw(local), STA_NOTIFY_SLEEP,
- &sta->sta);
+ if (local->ops->sta_notify)
+ local->ops->sta_notify(local_to_hw(local), &sdata->vif,
+ STA_NOTIFY_SLEEP, &sta->sta);
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
sdata->dev->name, sta->sta.addr, sta->sta.aid);
atomic_dec(&sdata->bss->num_sta_ps);
clear_sta_flags(sta, WLAN_STA_PS | WLAN_STA_PSPOLL);
- if (local->ops->sta_notify_ps)
- local->ops->sta_notify_ps(local_to_hw(local), STA_NOTIFY_AWAKE,
- &sta->sta);
+ if (local->ops->sta_notify)
+ local->ops->sta_notify(local_to_hw(local), &sdata->vif,
+ STA_NOTIFY_AWAKE, &sta->sta);
if (!skb_queue_empty(&sta->ps_tx_buf))
sta_info_clear_tim_bit(sta);