mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips

After '#echo mem > /sys/power/state' some devices can not be properly resumed
because apparently the MTD Partition Configuration Register has been reset
to default thus the rootfs cannot be mounted cleanly on resume.
An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3
where the second step of the Sleep Shutdown Sequence is described:
"An internal reset is applied to the SA-1100. All units are reset...".

As workaround we refresh the PCR value as done initially on chip setup.

This behavior and the fix are confirmed by our tests done on 2 different Zaurus
collie units with kernel 3.17.

Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR")
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index a7543ba3e19041e5aad85c6718b856a07f8f9726..3096f3ded3adf051454d5a99176267b070ceae2d 100644 (file)
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -2590,6 +2590,8 @@ static void cfi_intelext_resume(struct mtd_info *mtd)
 
                /* Go to known state. Chip may have been power cycled */
                if (chip->state == FL_PM_SUSPENDED) {
+                       /* Refresh LH28F640BF Partition Config. Register */
+                       fixup_LH28F640BF(mtd);
                        map_write(map, CMD(0xFF), cfi->chips[i].start);
                        chip->oldstate = chip->state = FL_READY;
                        wake_up(&chip->wq);