V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.

I've retained the older percentage code after discussing this with
Darron Broad, but made the ESNO option default.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c
index 30f82cb0928b3614bc62a2654b7eb7a6291ee243..b8acc7b74c33a09cbffe1d354f54a0e73fd08482 100644 (file)
--- a/drivers/media/dvb/frontends/cx24116.c
+++ b/drivers/media/dvb/frontends/cx24116.c
@@ -57,8 +57,9 @@ static int debug = 0;
 #define CX24116_REG_RESET   (0x20)      /* reset status > 0     */
 #define CX24116_REG_SIGNAL  (0x9e)      /* signal low           */
 #define CX24116_REG_SSTATUS (0x9d)      /* signal high / status */
+#define CX24116_REG_QUALITY8 (0xa3)
 #define CX24116_REG_QSTATUS (0xbc)
-#define CX24116_REG_QUALITY (0xd5)
+#define CX24116_REG_QUALITY0 (0xd5)
 #define CX24116_REG_BER0    (0xc9)
 #define CX24116_REG_BER8    (0xc8)
 #define CX24116_REG_BER16   (0xc7)
@@ -116,6 +117,9 @@ static int debug = 0;
 /* DiSEqC tone burst */
 static int toneburst = 1;
 
+/* SNR measurements */
+static int esno_snr = 1;
+
 enum cmds
 {
        CMD_SET_VCO     = 0x10,
@@ -703,7 +707,7 @@ static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_str
 }
 
 /* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */
-static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
+static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr)
 {
        struct cx24116_state *state = fe->demodulator_priv;
        u8 snr_reading;
@@ -714,7 +718,7 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
 
        dprintk("%s()\n", __func__);
 
-       snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY);
+       snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0);
 
        if(snr_reading >= 0xa0 /* 100% */)
                *snr = 0xffff;
@@ -728,6 +732,32 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
        return 0;
 }
 
+/* The reelbox patches show the value in the registers represents
+ * ESNO, from 0->30db (values 0->300). We provide this value by
+ * default.
+ */
+static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr)
+{
+       struct cx24116_state *state = fe->demodulator_priv;
+
+       dprintk("%s()\n", __func__);
+
+       *snr = cx24116_readreg(state, CX24116_REG_QUALITY8) << 8 |
+               cx24116_readreg(state, CX24116_REG_QUALITY0);
+
+       dprintk("%s: raw 0x%04x\n", __func__, *snr);
+
+       return 0;
+}
+
+static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+       if (esno_snr == 1)
+               return cx24116_read_snr_esno(fe, snr);
+       else
+               return cx24116_read_snr_pct(fe, snr);
+}
+
 static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 {
        struct cx24116_state *state = fe->demodulator_priv;
@@ -1383,6 +1413,9 @@ MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
 module_param(toneburst, int, 0644);
 MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)");
 
+module_param(esno_snr, int, 0644);
+MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:1)");
+
 MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware");
 MODULE_AUTHOR("Steven Toth");
 MODULE_LICENSE("GPL");