MIPS: Alchemy: Determine cohereny at runtime based on cpu type
authorManuel Lauss <manuel.lauss@gmail.com>
Thu, 20 Feb 2014 13:59:23 +0000 (14:59 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 26 Mar 2014 22:09:21 +0000 (23:09 +0100)
All Alchemy chips have coherent DMA, but for example the USB or AC97
peripherals on the Au1000/1500/1100 are not.
This patch uses DMA_MAYBE_COHERENT on Alchemy and sets coherentio based
on CPU type.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6576/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig
arch/mips/alchemy/Kconfig
arch/mips/alchemy/common/setup.c
arch/mips/pci/pci-alchemy.c

index daef6709db15590d7a3c76e53dfaaa3f048d274b..51f5a09f179dd05df3d35cdb581941bad563a6a3 100644 (file)
@@ -63,6 +63,7 @@ config MIPS_ALCHEMY
        select CEVT_R4K
        select CSRC_R4K
        select IRQ_CPU
+       select DMA_MAYBE_COHERENT       # Au1000,1500,1100 aren't, rest is
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_APM_EMULATION
index 7032ac7ecd1bb2f8083b848ca5ca01572dc4cd44..41386723f9fa86e6cc14e082da127c9df8172a18 100644 (file)
@@ -20,7 +20,6 @@ choice
 
 config MIPS_MTX1
        bool "4G Systems MTX-1 board"
-       select DMA_NONCOHERENT
        select HW_HAS_PCI
        select ALCHEMY_GPIOINT_AU1000
        select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -29,7 +28,6 @@ config MIPS_MTX1
 config MIPS_DB1000
        bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards"
        select ALCHEMY_GPIOINT_AU1000
-       select DMA_NONCOHERENT
        select HW_HAS_PCI
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -39,13 +37,11 @@ config MIPS_DB1235
        bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards"
        select ARCH_REQUIRE_GPIOLIB
        select HW_HAS_PCI
-       select DMA_COHERENT
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_HAS_EARLY_PRINTK
 
 config MIPS_XXS1500
        bool "MyCable XXS1500 board"
-       select DMA_NONCOHERENT
        select ALCHEMY_GPIOINT_AU1000
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_HAS_EARLY_PRINTK
@@ -54,7 +50,6 @@ config MIPS_GPR
        bool "Trapeze ITS GPR board"
        select ALCHEMY_GPIOINT_AU1000
        select HW_HAS_PCI
-       select DMA_NONCOHERENT
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select SYS_HAS_EARLY_PRINTK
 
index 62b4e7bbeab9efde6e40953d34ef1f44bfbda02b..566a1743f68537f6118e0a29d9ca684d3ba955aa 100644 (file)
@@ -30,6 +30,7 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
+#include <asm/dma-coherence.h>
 #include <asm/mipsregs.h>
 #include <asm/time.h>
 
@@ -59,6 +60,15 @@ void __init plat_mem_setup(void)
                /* Clear to obtain best system bus performance */
                clear_c0_config(1 << 19); /* Clear Config[OD] */
 
+       hw_coherentio = 0;
+       coherentio = 1;
+       switch (alchemy_get_cputype()) {
+       case ALCHEMY_CPU_AU1000:
+       case ALCHEMY_CPU_AU1500:
+       case ALCHEMY_CPU_AU1100:
+               coherentio = 0;
+       }
+
        board_setup();  /* board specific setup */
 
        /* IO/MEM resources. */
index d1faece21b6a78f4c79e20e3cfbaec448d281fad..563d1f61d6eeae50f79144f66f28ecfefea09775 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/vmalloc.h>
 
+#include <asm/dma-coherence.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/tlbmisc.h>
 
@@ -411,17 +412,15 @@ static int alchemy_pci_probe(struct platform_device *pdev)
        }
        ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
 
-#ifdef CONFIG_DMA_NONCOHERENT
        /* Au1500 revisions older than AD have borked coherent PCI */
        if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
-           (read_c0_prid() < 0x01030202)) {
+           (read_c0_prid() < 0x01030202) && !coherentio) {
                val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
                val |= PCI_CONFIG_NC;
                __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
                wmb();
                dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
        }
-#endif
 
        if (pd->board_map_irq)
                ctx->board_map_irq = pd->board_map_irq;