pata/at91: use newly introduced SMC accessors

pata_at91 driver is broken since faee0cc:
"make smc register base soc independent"
Fix it with newly introduced SMC accessors.

The overall action of removal of at91_sys_read/write will allow
to use the pata_at91 on a single zImage kernel.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: linux-ide@vger.kernel.org

diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a7d91a72ee352b45ca71cf1bd2ccb738890f1075..53d3770a0b1b8b3e101a10d221fef1d202ddf4d4 100644 (file)
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -207,11 +207,11 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev,
 {
        int ret = 0;
        int use_iordy;
+       struct sam9_smc_config smc;
        unsigned int t6z;         /* data tristate time in ns */
        unsigned int cycle;       /* SMC Cycle width in MCK ticks */
        unsigned int setup;       /* SMC Setup width in MCK ticks */
        unsigned int pulse;       /* CFIOR and CFIOW pulse width in MCK ticks */
-       unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
        unsigned int cs_pulse;    /* CS4 or CS5 pulse width in MCK ticks*/
        unsigned int tdf_cycles;  /* SMC TDF MCK ticks */
        unsigned long mck_hz;     /* MCK frequency in Hz */
@@ -244,26 +244,20 @@ static void set_smc_timing(struct device *dev, struct ata_device *adev,
        }
 
        dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
-       info->mode |= AT91_SMC_TDF_(tdf_cycles);
-
-       /* write SMC Setup Register */
-       at91_sys_write(AT91_SMC_SETUP(info->cs),
-                       AT91_SMC_NWESETUP_(setup) |
-                       AT91_SMC_NRDSETUP_(setup) |
-                       AT91_SMC_NCS_WRSETUP_(cs_setup) |
-                       AT91_SMC_NCS_RDSETUP_(cs_setup));
-       /* write SMC Pulse Register */
-       at91_sys_write(AT91_SMC_PULSE(info->cs),
-                       AT91_SMC_NWEPULSE_(pulse) |
-                       AT91_SMC_NRDPULSE_(pulse) |
-                       AT91_SMC_NCS_WRPULSE_(cs_pulse) |
-                       AT91_SMC_NCS_RDPULSE_(cs_pulse));
-       /* write SMC Cycle Register */
-       at91_sys_write(AT91_SMC_CYCLE(info->cs),
-                       AT91_SMC_NWECYCLE_(cycle) |
-                       AT91_SMC_NRDCYCLE_(cycle));
-       /* write SMC Mode Register*/
-       at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+
+       /* SMC Setup Register */
+       smc.nwe_setup = smc.nrd_setup = setup;
+       smc.ncs_write_setup = smc.ncs_read_setup = 0;
+       /* SMC Pulse Register */
+       smc.nwe_pulse = smc.nrd_pulse = pulse;
+       smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+       /* SMC Cycle Register */
+       smc.write_cycle = smc.read_cycle = cycle;
+       /* SMC Mode Register*/
+       smc.tdf_cycles = tdf_cycles;
+       smc.mode = info->mode;
+
+       sam9_smc_configure(0, info->cs, &smc);
 }
 
 static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -288,20 +282,20 @@ static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
        struct at91_ide_info *info = dev->link->ap->host->private_data;
        unsigned int consumed;
        unsigned long flags;
-       unsigned int mode;
+       struct sam9_smc_config smc;
 
        local_irq_save(flags);
-       mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+       sam9_smc_read_mode(0, info->cs, &smc);
 
        /* set 16bit mode before writing data */
-       at91_sys_write(AT91_SMC_MODE(info->cs),
-                       (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+       smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+       sam9_smc_write_mode(0, info->cs, &smc);
 
        consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
 
        /* restore 8bit mode after data is written */
-       at91_sys_write(AT91_SMC_MODE(info->cs),
-                       (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+       smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+       sam9_smc_write_mode(0, info->cs, &smc);
 
        local_irq_restore(flags);
        return consumed;