defxx: Add missing DMA synchronisation calls
authorMaciej W. Rozycki <macro@linux-mips.org>
Sat, 5 Jul 2014 14:14:46 +0000 (15:14 +0100)
committerDavid S. Miller <davem@davemloft.net>
Tue, 8 Jul 2014 22:30:27 +0000 (15:30 -0700)
This adds DMA synchronisation calls needed in the receive path:

1. To retrieve the Receive Status word that is prepended by the PDQ DMA
   engine in the receive buffer, and provides information about the
   frame received, including its size and any errors.

2. To make data received available for copying in the small-frame case
   (size <= SKBUFF_RX_COPYBREAK) where the original DMA buffer will be
   returned to the receive descriptor ring and therefore its mapping
   retained.

   With DMA mapping error handling in place, added by the other patch,
   this may now also trigger where an attempt to map a newly allocated
   buffer for DMA has failed.  In that case data from the original buffer
   will be copied out and the buffer returned to the DMA descriptor ring.

These calls may do nothing when data is in the host DMA addressing range
of the FDDI interface, such as always on 32-bit systems, however their
absence makes frame reception stop functioning reliably on systems that
have memory beyond the low 4GB of the address space.

Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/fddi/defxx.c

index ed23288d1c55479ae8d9486aef84700111091dd2..3d1a878a4ab0d6f2a7abfec59c5d35780d27405c 100644 (file)
  *             14 Jun 2005     macro           Use irqreturn_t.
  *             23 Oct 2006     macro           Big-endian host support.
  *             14 Dec 2006     macro           TURBOchannel support.
+ *             01 Jul 2014     macro           Fixes for DMA on 64-bit hosts.
  */
 
 /* Include files */
 
 /* Version information string should be updated prior to each new release!  */
 #define DRV_NAME "defxx"
-#define DRV_VERSION "v1.10"
-#define DRV_RELDATE "2006/12/14"
+#define DRV_VERSION "v1.11"
+#define DRV_RELDATE "2014/07/01"
 
 static char version[] =
        DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
@@ -3026,7 +3027,7 @@ static void dfx_rcv_queue_process(
        while (bp->rcv_xmt_reg.index.rcv_comp != p_type_2_cons->index.rcv_cons)
                {
                /* Process any errors */
-
+               dma_addr_t dma_addr;
                int entry;
 
                entry = bp->rcv_xmt_reg.index.rcv_comp;
@@ -3035,6 +3036,11 @@ static void dfx_rcv_queue_process(
 #else
                p_buff = bp->p_rcv_buff_va[entry];
 #endif
+               dma_addr = bp->descr_block_virt->rcv_data[entry].long_1;
+               dma_sync_single_for_cpu(bp->bus_dev,
+                                       dma_addr + RCV_BUFF_K_DESCR,
+                                       sizeof(u32),
+                                       DMA_FROM_DEVICE);
                memcpy(&descr, p_buff + RCV_BUFF_K_DESCR, sizeof(u32));
 
                if (descr & PI_FMC_DESCR_M_RCC_FLUSH)
@@ -3082,7 +3088,7 @@ static void dfx_rcv_queue_process(
 
                                                skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
                                                dma_unmap_single(bp->bus_dev,
-                                                       bp->descr_block_virt->rcv_data[entry].long_1,
+                                                       dma_addr,
                                                        PI_RCV_DATA_K_SIZE_MAX,
                                                        DMA_FROM_DEVICE);
                                                skb_reserve(skb, RCV_BUFF_K_PADDING);
@@ -3108,6 +3114,12 @@ static void dfx_rcv_queue_process(
 #endif
                                        {
                                                /* Receive buffer allocated, pass receive packet up */
+                                               dma_sync_single_for_cpu(
+                                                       bp->bus_dev,
+                                                       dma_addr +
+                                                       RCV_BUFF_K_PADDING,
+                                                       pkt_len + 3,
+                                                       DMA_FROM_DEVICE);
 
                                                skb_copy_to_linear_data(skb,
                                                               p_buff + RCV_BUFF_K_PADDING,