*/
#define MAX_MIDI_RX_BLOCKS 8
+/* 3 = MAX(DOT_MIDI_IN_PORTS, DOT_MIDI_OUT_PORTS) + 1. */
+#define MAX_MIDI_PORTS 3
+
/*
* The double-oh-three algorithm was discovered by Robin Gareus and Damien
* Zammit in 2012, with reverse-engineering for Digi 003 Rack.
unsigned int pcm_channels;
struct dot_state state;
- unsigned int midi_ports;
- /* 2 = MAX(DOT_MIDI_IN_PORTS, DOT_MIDI_OUT_PORTS) */
- struct snd_rawmidi_substream *midi[2];
- int midi_fifo_used[2];
+ struct snd_rawmidi_substream *midi[MAX_MIDI_PORTS];
+ int midi_fifo_used[MAX_MIDI_PORTS];
int midi_fifo_limit;
void (*transfer_samples)(struct amdtp_stream *s,
return -EBUSY;
/*
- * A first data channel is for MIDI conformant data channel, the rest is
- * Multi Bit Linear Audio data channel.
+ * A first data channel is for MIDI messages, the rest is Multi Bit
+ * Linear Audio data channel.
*/
err = amdtp_stream_set_parameters(s, rate, pcm_channels + 1);
if (err < 0)
p->pcm_channels = pcm_channels;
- if (s->direction == AMDTP_IN_STREAM)
- p->midi_ports = DOT_MIDI_IN_PORTS;
- else
- p->midi_ports = DOT_MIDI_OUT_PORTS;
-
/*
* We do not know the actual MIDI FIFO size of most devices. Just
* assume two bytes, i.e., one byte can be received over the bus while
b = (u8 *)&buffer[0];
len = 0;
- if (port < p->midi_ports &&
+ if (port < MAX_MIDI_PORTS &&
midi_ratelimit_per_packet(s, port) &&
p->midi[port] != NULL)
len = snd_rawmidi_transmit(p->midi[port], b + 1, 2);
if (len > 0) {
- b[3] = (0x10 << port) | len;
+ /*
+ * Upper 4 bits of LSB represent port number.
+ * - 0000b: physical MIDI port 1.
+ * - 0010b: physical MIDI port 2.
+ * - 1110b: console MIDI port.
+ */
+ if (port == 2)
+ b[3] = 0xe0;
+ else if (port == 1)
+ b[3] = 0x20;
+ else
+ b[3] = 0x00;
+ b[3] |= len;
midi_use_bytes(s, port, len);
} else {
b[1] = 0;
for (f = 0; f < data_blocks; f++) {
b = (u8 *)&buffer[0];
- port = b[3] >> 4;
- len = b[3] & 0x0f;
- if (port < p->midi_ports && p->midi[port] && len > 0)
- snd_rawmidi_receive(p->midi[port], b + 1, len);
+ len = b[3] & 0x0f;
+ if (len > 0) {
+ /*
+ * Upper 4 bits of LSB represent port number.
+ * - 0000b: physical MIDI port 1. Use port 0.
+ * - 1110b: console MIDI port. Use port 2.
+ */
+ if (b[3] >> 4 > 0)
+ port = 2;
+ else
+ port = 0;
+
+ if (port < MAX_MIDI_PORTS && p->midi[port])
+ snd_rawmidi_receive(p->midi[port], b + 1, len);
+ }
buffer += s->data_block_quadlets;
}
{
struct amdtp_dot *p = s->protocol;
- if (port < p->midi_ports)
+ if (port < MAX_MIDI_PORTS)
ACCESS_ONCE(p->midi[port]) = midi;
}