}
static const struct v4l2_subdev_video_ops adv7180_video_ops = {
+ .s_std = adv7180_s_std,
.querystd = adv7180_querystd,
.g_input_status = adv7180_g_input_status,
.s_routing = adv7180_s_routing,
};
static const struct v4l2_subdev_core_ops adv7180_core_ops = {
- .s_std = adv7180_s_std,
.s_power = adv7180_s_power,
};
static const struct v4l2_subdev_core_ops adv7183_core_ops = {
.log_status = adv7183_log_status,
- .g_std = adv7183_g_std,
- .s_std = adv7183_s_std,
.reset = adv7183_reset,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = adv7183_g_register,
};
static const struct v4l2_subdev_video_ops adv7183_video_ops = {
+ .g_std = adv7183_g_std,
+ .s_std = adv7183_s_std,
.s_routing = adv7183_s_routing,
.querystd = adv7183_querystd,
.g_input_status = adv7183_g_input_status,
static const struct v4l2_subdev_core_ops adv7842_core_ops = {
.log_status = adv7842_log_status,
- .g_std = adv7842_g_std,
- .s_std = adv7842_s_std,
.ioctl = adv7842_ioctl,
.interrupt_service_routine = adv7842_isr,
#ifdef CONFIG_VIDEO_ADV_DEBUG
};
static const struct v4l2_subdev_video_ops adv7842_video_ops = {
+ .g_std = adv7842_g_std,
+ .s_std = adv7842_s_std,
.s_routing = adv7842_s_routing,
.querystd = adv7842_querystd,
.g_input_status = adv7842_g_input_status,
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = bt819_s_std,
};
static const struct v4l2_subdev_video_ops bt819_video_ops = {
+ .s_std = bt819_s_std,
.s_routing = bt819_s_routing,
.s_stream = bt819_s_stream,
.querystd = bt819_querystd,
.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = cx25840_s_std,
- .g_std = cx25840_g_std,
.reset = cx25840_reset,
.load_fw = cx25840_load_fw,
.s_io_pin_config = common_s_io_pin_config,
};
static const struct v4l2_subdev_video_ops cx25840_video_ops = {
+ .s_std = cx25840_s_std,
+ .g_std = cx25840_g_std,
.s_routing = cx25840_s_video_routing,
.s_mbus_fmt = cx25840_s_mbus_fmt,
.s_stream = cx25840_s_stream,
/* ----------------------------------------------------------------------- */
-static const struct v4l2_subdev_core_ops ks0127_core_ops = {
- .s_std = ks0127_s_std,
-};
-
static const struct v4l2_subdev_video_ops ks0127_video_ops = {
+ .s_std = ks0127_s_std,
.s_routing = ks0127_s_routing,
.s_stream = ks0127_s_stream,
.querystd = ks0127_querystd,
};
static const struct v4l2_subdev_ops ks0127_ops = {
- .core = &ks0127_core_ops,
.video = &ks0127_video_ops,
};
};
static struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = {
+ .s_std = ml86v7667_s_std,
.querystd = ml86v7667_querystd,
.g_input_status = ml86v7667_g_input_status,
.enum_mbus_fmt = ml86v7667_enum_mbus_fmt,
};
static struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = {
- .s_std = ml86v7667_s_std,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ml86v7667_g_register,
.s_register = ml86v7667_s_register,
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = msp_s_std,
};
static const struct v4l2_subdev_video_ops msp_video_ops = {
+ .s_std = msp_s_std,
.querystd = msp_querystd,
};
static const struct v4l2_subdev_core_ops saa6752hs_core_ops = {
.init = saa6752hs_init,
- .s_std = saa6752hs_s_std,
};
static const struct v4l2_subdev_video_ops saa6752hs_video_ops = {
+ .s_std = saa6752hs_s_std,
.s_mbus_fmt = saa6752hs_s_mbus_fmt,
.try_mbus_fmt = saa6752hs_try_mbus_fmt,
.g_mbus_fmt = saa6752hs_g_mbus_fmt,
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = saa7110_s_std,
};
static const struct v4l2_subdev_video_ops saa7110_video_ops = {
+ .s_std = saa7110_s_std,
.s_routing = saa7110_s_routing,
.s_stream = saa7110_s_stream,
.querystd = saa7110_querystd,
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = saa711x_s_std,
.reset = saa711x_reset,
.s_gpio = saa711x_s_gpio,
#ifdef CONFIG_VIDEO_ADV_DEBUG
};
static const struct v4l2_subdev_video_ops saa711x_video_ops = {
+ .s_std = saa711x_s_std,
.s_routing = saa711x_s_routing,
.s_crystal_freq = saa711x_s_crystal_freq,
.s_mbus_fmt = saa711x_s_mbus_fmt,
.g_register = saa717x_g_register,
.s_register = saa717x_s_register,
#endif
- .s_std = saa717x_s_std,
.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
};
static const struct v4l2_subdev_video_ops saa717x_video_ops = {
+ .s_std = saa717x_s_std,
.s_routing = saa717x_s_video_routing,
.s_mbus_fmt = saa717x_s_mbus_fmt,
.s_stream = saa717x_s_stream,
static const struct v4l2_subdev_core_ops saa7191_core_ops = {
.g_ctrl = saa7191_g_ctrl,
.s_ctrl = saa7191_s_ctrl,
- .s_std = saa7191_s_std,
};
static const struct v4l2_subdev_video_ops saa7191_video_ops = {
+ .s_std = saa7191_s_std,
.s_routing = saa7191_s_routing,
.querystd = saa7191_querystd,
.g_input_status = saa7191_g_input_status,
}
static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
- .s_std = tw9910_s_std,
- .g_std = tw9910_g_std,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = tw9910_g_register,
.s_register = tw9910_s_register,
}
static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
+ .s_std = tw9910_s_std,
+ .g_std = tw9910_g_std,
.s_stream = tw9910_s_stream,
.g_mbus_fmt = tw9910_g_fmt,
.s_mbus_fmt = tw9910_s_fmt,
/* --------------------------------------------------------------------------*/
-static const struct v4l2_subdev_core_ops sony_btf_mpx_core_ops = {
- .s_std = sony_btf_mpx_s_std,
-};
-
static const struct v4l2_subdev_tuner_ops sony_btf_mpx_tuner_ops = {
.s_tuner = sony_btf_mpx_s_tuner,
.g_tuner = sony_btf_mpx_g_tuner,
};
+static const struct v4l2_subdev_video_ops sony_btf_mpx_video_ops = {
+ .s_std = sony_btf_mpx_s_std,
+};
+
static const struct v4l2_subdev_ops sony_btf_mpx_ops = {
- .core = &sony_btf_mpx_core_ops,
.tuner = &sony_btf_mpx_tuner_ops,
+ .video = &sony_btf_mpx_video_ops,
};
/* --------------------------------------------------------------------------*/
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = tvaudio_s_std,
};
static const struct v4l2_subdev_tuner_ops tvaudio_tuner_ops = {
.s_routing = tvaudio_s_routing,
};
+static const struct v4l2_subdev_video_ops tvaudio_video_ops = {
+ .s_std = tvaudio_s_std,
+};
+
static const struct v4l2_subdev_ops tvaudio_ops = {
.core = &tvaudio_core_ops,
.tuner = &tvaudio_tuner_ops,
.audio = &tvaudio_audio_ops,
+ .video = &tvaudio_video_ops,
};
/* ----------------------------------------------------------------------- */
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = tvp514x_s_std,
};
static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
+ .s_std = tvp514x_s_std,
.s_routing = tvp514x_s_routing,
.querystd = tvp514x_querystd,
.enum_mbus_fmt = tvp514x_enum_mbus_fmt,
static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
.log_status = tvp5150_log_status,
- .s_std = tvp5150_s_std,
.reset = tvp5150_reset,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = tvp5150_g_register,
};
static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
+ .s_std = tvp5150_s_std,
.s_routing = tvp5150_s_routing,
.enum_mbus_fmt = tvp5150_enum_mbus_fmt,
.s_mbus_fmt = tvp5150_mbus_fmt,
};
static const struct v4l2_subdev_video_ops tw2804_video_ops = {
+ .s_std = tw2804_s_std,
.s_routing = tw2804_s_video_routing,
};
static const struct v4l2_subdev_core_ops tw2804_core_ops = {
.log_status = tw2804_log_status,
- .s_std = tw2804_s_std,
};
static const struct v4l2_subdev_ops tw2804_ops = {
static const struct v4l2_subdev_core_ops tw9903_core_ops = {
.log_status = tw9903_log_status,
- .s_std = tw9903_s_std,
};
static const struct v4l2_subdev_video_ops tw9903_video_ops = {
+ .s_std = tw9903_s_std,
.s_routing = tw9903_s_video_routing,
};
static const struct v4l2_subdev_core_ops tw9906_core_ops = {
.log_status = tw9906_log_status,
- .s_std = tw9906_s_std,
};
static const struct v4l2_subdev_video_ops tw9906_video_ops = {
+ .s_std = tw9906_s_std,
.s_routing = tw9906_s_video_routing,
};
static const struct v4l2_subdev_core_ops vp27smpx_core_ops = {
.log_status = vp27smpx_log_status,
- .s_std = vp27smpx_s_std,
};
static const struct v4l2_subdev_tuner_ops vp27smpx_tuner_ops = {
.g_tuner = vp27smpx_g_tuner,
};
+static const struct v4l2_subdev_video_ops vp27smpx_video_ops = {
+ .s_std = vp27smpx_s_std,
+};
+
static const struct v4l2_subdev_ops vp27smpx_ops = {
.core = &vp27smpx_core_ops,
.tuner = &vp27smpx_tuner_ops,
+ .video = &vp27smpx_video_ops,
};
/* ----------------------------------------------------------------------- */
.s_ctrl = v4l2_subdev_s_ctrl,
.queryctrl = v4l2_subdev_queryctrl,
.querymenu = v4l2_subdev_querymenu,
- .s_std = vpx3220_s_std,
};
static const struct v4l2_subdev_video_ops vpx3220_video_ops = {
+ .s_std = vpx3220_s_std,
.s_routing = vpx3220_s_routing,
.s_stream = vpx3220_s_stream,
.querystd = vpx3220_querystd,
break;
}
id = tvnorm->v4l2_id;
- bttv_call_all(btv, core, s_std, id);
+ bttv_call_all(btv, video, s_std, id);
return 0;
}
.log_status = cx18_av_log_status,
.load_fw = cx18_av_load_fw,
.reset = cx18_av_reset,
- .s_std = cx18_av_s_std,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = cx18_av_g_register,
.s_register = cx18_av_s_register,
};
static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
+ .s_std = cx18_av_s_std,
.s_routing = cx18_av_s_video_routing,
.s_stream = cx18_av_s_stream,
.s_mbus_fmt = cx18_av_s_mbus_fmt,
/* Mark that the radio is no longer in use */
clear_bit(CX18_F_I_RADIO_USER, &cx->i_flags);
/* Switch tuner to TV */
- cx18_call_all(cx, core, s_std, cx->std);
+ cx18_call_all(cx, video, s_std, cx->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
cx18_audio_set_io(cx);
if (atomic_read(&cx->ana_capturing) > 0) {
static const struct v4l2_subdev_core_ops gpiomux_core_ops = {
.log_status = gpiomux_log_status,
- .s_std = gpiomux_s_std,
};
static const struct v4l2_subdev_tuner_ops gpiomux_tuner_ops = {
.s_routing = gpiomux_s_audio_routing,
};
+static const struct v4l2_subdev_video_ops gpiomux_video_ops = {
+ .s_std = gpiomux_s_std,
+};
+
static const struct v4l2_subdev_ops gpiomux_ops = {
.core = &gpiomux_core_ops,
.tuner = &gpiomux_tuner_ops,
.audio = &gpiomux_audio_ops,
+ .video = &gpiomux_video_ops,
};
/*
(unsigned long long) cx->std);
/* Tuner */
- cx18_call_all(cx, core, s_std, cx->std);
+ cx18_call_all(cx, video, s_std, cx->std);
return 0;
}
dev->tvnorm = norm;
- call_all(dev, core, s_std, norm);
+ call_all(dev, video, s_std, norm);
return 0;
}
fe = &dev->ts1.analog_fe;
if (fe && fe->ops.tuner_ops.set_analog_params) {
- call_all(dev, core, s_std, dev->tvnorm);
+ call_all(dev, video, s_std, dev->tvnorm);
fe->ops.tuner_ops.set_analog_params(fe, ¶ms);
}
else
set_tvaudio(core);
// tell i2c chips
- call_all(core, core, s_std, norm);
+ call_all(core, video, s_std, norm);
/* The chroma_agc control should be inaccessible if the video format is SECAM */
v4l2_ctrl_grab(core->chroma_agc, cxiformat == VideoFormatSECAM);
/* Mark that the radio is no longer in use */
clear_bit(IVTV_F_I_RADIO_USER, &itv->i_flags);
/* Switch tuner to TV */
- ivtv_call_all(itv, core, s_std, itv->std);
+ ivtv_call_all(itv, video, s_std, itv->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
ivtv_audio_set_io(itv);
if (itv->hw_flags & IVTV_HW_SAA711X) {
itv->vbi.sliced_decoder_line_size = itv->is_60hz ? 272 : 284;
/* Tuner */
- ivtv_call_all(itv, core, s_std, itv->std);
+ ivtv_call_all(itv, video, s_std, itv->std);
}
void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id std)
saa7134_set_decoder(dev);
if (card_in(dev, dev->ctl_input).tv)
- saa_call_all(dev, core, s_std, dev->tvnorm->id);
+ saa_call_all(dev, video, s_std, dev->tvnorm->id);
/* Set the correct norm for the saa6752hs. This function
does nothing if there is no saa6752hs. */
- saa_call_empress(dev, core, s_std, dev->tvnorm->id);
+ saa_call_empress(dev, video, s_std, dev->tvnorm->id);
}
static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale)
tea6420_route(mxb, 6);
/* select video mode in saa7111a */
- saa7111a_call(mxb, core, s_std, std);
+ saa7111a_call(mxb, video, s_std, std);
/* select tuner-output on saa7111a */
i = 0;
/* These two gpio calls set the GPIO pins that control the tda9820 */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
saa7111a_call(mxb, core, s_gpio, 1);
- saa7111a_call(mxb, core, s_std, std);
- tuner_call(mxb, core, s_std, std);
+ saa7111a_call(mxb, video, s_std, std);
+ tuner_call(mxb, video, s_std, std);
/* switch to tuner-channel on tea6415c */
tea6415c_call(mxb, video, s_routing, 3, 17, 0);
/* These two gpio calls set the GPIO pins that control the tda9820 */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
saa7111a_call(mxb, core, s_gpio, 0);
- saa7111a_call(mxb, core, s_std, std);
+ saa7111a_call(mxb, video, s_std, std);
if (mxb->cur_input == 0)
- tuner_call(mxb, core, s_std, std);
+ tuner_call(mxb, video, s_std, std);
} else {
v4l2_std_id std = V4L2_STD_PAL_BG;
/* These two gpio calls set the GPIO pins that control the tda9820 */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
saa7111a_call(mxb, core, s_gpio, 1);
- saa7111a_call(mxb, core, s_std, std);
+ saa7111a_call(mxb, video, s_std, std);
if (mxb->cur_input == 0)
- tuner_call(mxb, core, s_std, std);
+ tuner_call(mxb, video, s_std, std);
}
return 0;
}
int status;
if (V4L2_STD_ALL == std) {
- v4l2_subdev_call(vip->decoder, core, s_std, std);
+ v4l2_subdev_call(vip->decoder, video, s_std, std);
ssleep(2);
v4l2_subdev_call(vip->decoder, video, querystd, &newstd);
v4l2_subdev_call(vip->decoder, video, g_input_status, &status);
vip->format = formats_50[0];
}
- return v4l2_subdev_call(vip->decoder, core, s_std, std);
+ return v4l2_subdev_call(vip->decoder, video, s_std, std);
}
/**
}
decoder_call(zr, core, init, 0);
- decoder_call(zr, core, s_std, zr->norm);
+ decoder_call(zr, video, s_std, zr->norm);
decoder_call(zr, video, s_routing,
zr->card.input[zr->input].muxsel, 0, 0);
if (on)
zr36057_overlay(zr, 0);
- decoder_call(zr, core, s_std, norm);
+ decoder_call(zr, video, s_std, norm);
encoder_call(zr, video, s_std_output, norm);
if (on)
if (vb2_is_busy(&bcap_dev->buffer_queue))
return -EBUSY;
- ret = v4l2_subdev_call(bcap_dev->sd, core, s_std, std);
+ ret = v4l2_subdev_call(bcap_dev->sd, video, s_std, std);
if (ret < 0)
return ret;
/* now we can probe the default state */
if (config->inputs[0].capabilities & V4L2_IN_CAP_STD) {
v4l2_std_id std;
- ret = v4l2_subdev_call(bcap_dev->sd, core, g_std, &std);
+ ret = v4l2_subdev_call(bcap_dev->sd, video, g_std, &std);
if (ret) {
v4l2_err(&bcap_dev->v4l2_dev,
"Unable to get std\n");
}
ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- core, s_std, std_id);
+ video, s_std, std_id);
if (ret < 0) {
v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
goto unlock_out;
vpif_config_format(ch);
/* set standard in the sub device */
- ret = v4l2_subdev_call(ch->sd, core, s_std, std_id);
+ ret = v4l2_subdev_call(ch->sd, video, s_std, std_id);
if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) {
vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
return ret;
return ret;
}
- ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core,
+ ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
s_std, std_id);
if (ret < 0)
vpif_err("Failed to set standard for sub devices\n");
struct viu_fh *fh = priv;
fh->dev->std = id;
- decoder_call(fh->dev, core, s_std, id);
+ decoder_call(fh->dev, video, s_std, id);
return 0;
}
struct soc_camera_device *icd = file->private_data;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- return v4l2_subdev_call(sd, core, s_std, a);
+ return v4l2_subdev_call(sd, video, s_std, a);
}
static int soc_camera_g_std(struct file *file, void *priv, v4l2_std_id *a)
struct soc_camera_device *icd = file->private_data;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- return v4l2_subdev_call(sd, core, g_std, a);
+ return v4l2_subdev_call(sd, video, g_std, a);
}
static int soc_camera_enum_framesizes(struct file *file, void *fh,
mutex_lock(&lw->lock);
if (TIMBLOGIW_HAS_DECODER(lw))
- err = v4l2_subdev_call(lw->sd_enc, core, s_std, std);
+ err = v4l2_subdev_call(lw->sd_enc, video, s_std, std);
if (!err)
fh->cur_norm = timblogiw_get_norm(std);
}
if (data_norm == 3)
data_norm = VINO_DATA_NORM_PAL;
- ret = decoder_call(core, s_std, norm);
+ ret = decoder_call(video, s_std, norm);
}
spin_lock_irqsave(&vino_drvdata->input_lock, flags);
}
if (data_norm == 3)
data_norm = VINO_DATA_NORM_PAL;
- ret = decoder_call(core, s_std, norm);
+ ret = decoder_call(video, s_std, norm);
}
spin_lock_irqsave(&vino_drvdata->input_lock, flags);
* as it may take a while... */
norm = vino_data_norms[data_norm].std;
- err = decoder_call(core, s_std, norm);
+ err = decoder_call(video, s_std, norm);
spin_lock_irqsave(&vino_drvdata->input_lock, *flags);
/* If we've never sent the standard in tuner core, do so now.
We don't do this at device probe because we don't want to
incur the cost of a firmware load */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->std);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->std);
v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
i2c_gate_ctrl(dev, 0);
}
have to make the au0828 bridge adjust the size of its capture
buffer, which is currently hardcoded at 720x480 */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, norm);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, norm);
i2c_gate_ctrl(dev, 0);
dev->ts1.height = 576;
cx2341x_handler_set_50hz(&dev->mpeg_ctrl_handler, true);
}
- call_all(dev, core, s_std, dev->norm);
+ call_all(dev, video, s_std, dev->norm);
/* do mode control overrides */
cx231xx_do_mode_ctrl_overrides(dev);
dev->width = 720;
dev->height = (dev->norm & V4L2_STD_625_50) ? 576 : 480;
- call_all(dev, core, s_std, dev->norm);
+ call_all(dev, video, s_std, dev->norm);
/* We need to reset basic properties in the decoder related to
resolution (since a standard change effects things like the number
/* There's a tuner, so reset the standard and put it on the
last known frequency (since it was probably powered down
until now */
- call_all(dev, core, s_std, dev->norm);
+ call_all(dev, video, s_std, dev->norm);
}
return 0;
/* Set the initial input */
video_mux(dev, dev->video_input);
- call_all(dev, core, s_std, dev->norm);
+ call_all(dev, video, s_std, dev->norm);
v4l2_ctrl_handler_init(&dev->ctrl_handler, 10);
v4l2_ctrl_handler_init(&dev->radio_ctrl_handler, 5);
&v4l2->hscale, &v4l2->vscale);
em28xx_resolution_set(dev);
- v4l2_device_call_all(&v4l2->v4l2_dev, 0, core, s_std, v4l2->norm);
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
return 0;
}
/* set default norm */
v4l2->norm = V4L2_STD_PAL;
- v4l2_device_call_all(&v4l2->v4l2_dev, 0, core, s_std, v4l2->norm);
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
v4l2->interlaced_fieldmode = EM28XX_INTERLACED_DEFAULT;
/* Analog specific initialization */
v4l2_std_id vs;
vs = hdw->std_mask_cur;
v4l2_device_call_all(&hdw->v4l2_dev, 0,
- core, s_std, vs);
+ video, s_std, vs);
pvr2_hdw_cx25840_vbi_hack(hdw);
}
hdw->tuner_signal_stale = !0;
stk1160_set_std(dev);
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std,
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std,
dev->norm);
return 0;
dev->fmt = &format[0];
stk1160_set_std(dev);
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std,
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std,
dev->norm);
video_set_drvdata(&dev->vdev, dev);
tm6000_config_tuner(dev);
/* Set video standard */
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
/* Set tuner frequency - also loads firmware on xc2028/xc3028 */
f.tuner = 0;
if (rc < 0)
return rc;
- v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm);
return 0;
}
usbvision->tvnorm_id = id;
- call_all(usbvision, core, s_std, usbvision->tvnorm_id);
+ call_all(usbvision, video, s_std, usbvision->tvnorm_id);
/* propagate the change to the decoder */
usbvision_muxsel(usbvision, usbvision->ctl_input);
static const struct v4l2_subdev_core_ops tuner_core_ops = {
.log_status = tuner_log_status,
- .s_std = tuner_s_std,
.s_power = tuner_s_power,
};
.s_config = tuner_s_config,
};
+static const struct v4l2_subdev_video_ops tuner_video_ops = {
+ .s_std = tuner_s_std,
+};
+
static const struct v4l2_subdev_ops tuner_ops = {
.core = &tuner_core_ops,
.tuner = &tuner_tuner_ops,
+ .video = &tuner_video_ops,
};
/*
goto unlock_out;
}
ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
- core, s_std, std_id);
+ video, s_std, std_id);
if (ret < 0) {
v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
video->stdid = V4L2_STD_UNKNOWN;
go->sensor_framerate = 30000;
}
- call_all(&go->v4l2_dev, core, s_std, go->std);
+ call_all(&go->v4l2_dev, video, s_std, go->std);
set_capture_size(go, NULL, 0);
return 0;
}
static const struct v4l2_subdev_core_ops s2250_core_ops = {
.log_status = s2250_log_status,
- .s_std = s2250_s_std,
};
static const struct v4l2_subdev_audio_ops s2250_audio_ops = {
};
static const struct v4l2_subdev_video_ops s2250_video_ops = {
+ .s_std = s2250_s_std,
.s_routing = s2250_s_video_routing,
.s_mbus_fmt = s2250_s_mbus_fmt,
};
.g_ctrl = saa7134_go7007_g_ctrl,
.s_ctrl = saa7134_go7007_s_ctrl,
.queryctrl = saa7134_go7007_queryctrl,
+};
+
+static const struct v4l2_subdev_video_ops saa7134_go7007_video_ops = {
.s_std = saa7134_go7007_s_std,
};
static const struct v4l2_subdev_ops saa7134_go7007_sd_ops = {
.core = &saa7134_go7007_core_ops,
+ .video = &saa7134_go7007_video_ops,
};
/* --------------------------------------------------------------------------*/
int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
- int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
- int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
#ifdef CONFIG_COMPAT
long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd,
struct v4l2_subdev_video_ops {
int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
+ int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
+ int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
/* Call an ops of a v4l2_subdev, doing the right checks against
NULL pointers.
- Example: err = v4l2_subdev_call(sd, core, s_std, norm);
+ Example: err = v4l2_subdev_call(sd, video, s_std, norm);
*/
#define v4l2_subdev_call(sd, o, f, args...) \
(!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff