ARM: Kirkwood: Use fixed-regulator instead of board gpio call

With the change to a DT based pinctrl/gpio driver, using gpio API
calls in board-*.c files no longer works, a dereferenced NULL pointer
exception occurs instead. By converting the GPIO code into a
fixed-regulator which gets probed later once pinctrl/gpio is
available, we avoid the exception.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mplch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index c0de5a7f660d976269087e7f8e888b141adf8468..cd15452a52a62024f9518a5abdb677ab8292fd9c 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -82,4 +82,21 @@
                        gpios = <&gpio1 16 1>;
                };
        };
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               sata0_power: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "SATA0 Power";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio1 4 0>;
+               };
+       };
 };

diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 15e69fcde9f4d262f80d749938ce8c477130e0d9..23d2dd1b1b1ed4079d61d20fd60ec898d9901de9 100644 (file)
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
        0
 };
 
-#define TOPKICK_SATA0_PWR_ENABLE 36
-
 void __init usi_topkick_init(void)
 {
        /*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
         */
        kirkwood_mpp_conf(topkick_mpp_config);
 
-       /* SATA0 power enable */
-       gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
        kirkwood_ge00_init(&topkick_ge00_data);
        kirkwood_sdio_init(&topkick_mvsdio_data);