rt2800: 5592: add iq calibration

Based on:
GetIQCalibration()
IQCalibration()

from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9d18d5384be708bebd91086641d5b402985da3e5..25c94b596e93ac8bcc00cf30be1923c10ccb878a 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2531,6 +2531,61 @@ struct mac_iveiv_entry {
 #define EEPROM_BBP_VALUE               FIELD16(0x00ff)
 #define EEPROM_BBP_REG_ID              FIELD16(0xff00)
 
+/*
+ * EEPROM IQ Calibration, unlike other entries those are byte addresses.
+ */
+
+#define EEPROM_IQ_GAIN_CAL_TX0_2G                      0x130
+#define EEPROM_IQ_PHASE_CAL_TX0_2G                     0x131
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G                        0x132
+#define EEPROM_IQ_GAIN_CAL_TX1_2G                      0x133
+#define EEPROM_IQ_PHASE_CAL_TX1_2G                     0x134
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G                        0x135
+#define EEPROM_IQ_GAIN_CAL_RX0_2G                      0x136
+#define EEPROM_IQ_PHASE_CAL_RX0_2G                     0x137
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G                        0x138
+#define EEPROM_IQ_GAIN_CAL_RX1_2G                      0x139
+#define EEPROM_IQ_PHASE_CAL_RX1_2G                     0x13A
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G                        0x13B
+#define EEPROM_RF_IQ_COMPENSATION_CONTROL              0x13C
+#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL    0x13D
+#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G         0x144
+#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G                0x145
+#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G       0X146
+#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G      0x147
+#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G       0x148
+#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G      0x149
+#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G         0x14A
+#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G                0x14B
+#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G       0X14C
+#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G      0x14D
+#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G       0x14E
+#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G      0x14F
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G   0x150
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G   0x151
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155
+#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G         0x156
+#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G                0x157
+#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G       0X158
+#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G      0x159
+#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G       0x15A
+#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G      0x15B
+#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G         0x15C
+#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G                0x15D
+#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G       0X15E
+#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G      0x15F
+#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G       0x160
+#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G      0x161
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G   0x162
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G   0x163
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167
+
 /*
  * MCU mailbox commands.
  * MCU_SLEEP - go to power-save mode.

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index c990ab8b1d247d843d47c88e7dac79ee5640b1f1..e96ea3298c7c1898bc31d1f91fd8fcadd3e9734f 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -527,8 +527,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
         */
        rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
        rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-       if (rt2x00_is_usb(rt2x00dev))
+       if (rt2x00_is_usb(rt2x00dev)) {
                rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
+               rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+       }
        msleep(1);
 
        return 0;
@@ -2456,6 +2458,41 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
        rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
 }
 
+static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
+{
+       u8 cal;
+
+       /* TODO */
+       if (WARN_ON_ONCE(channel > 14))
+               return;
+
+       rt2800_bbp_write(rt2x00dev, 158, 0x2c);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
+       rt2800_bbp_write(rt2x00dev, 159, cal);
+
+       rt2800_bbp_write(rt2x00dev, 158, 0x2d);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
+       rt2800_bbp_write(rt2x00dev, 159, cal);
+
+       rt2800_bbp_write(rt2x00dev, 158, 0x4a);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
+       rt2800_bbp_write(rt2x00dev, 159, cal);
+
+       rt2800_bbp_write(rt2x00dev, 158, 0x4b);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
+       rt2800_bbp_write(rt2x00dev, 159, cal);
+
+       /* RF IQ compensation control */
+       rt2800_bbp_write(rt2x00dev, 158, 0x04);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
+       rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
+
+       /* RF IQ imbalance compensation control */
+       rt2800_bbp_write(rt2x00dev, 158, 0x03);
+       cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
+       rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
+}
+
 static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
                                  struct ieee80211_conf *conf,
                                  struct rf_channel *rf,
@@ -2606,7 +2643,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
                rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
 
                /* TODO AGC adjust */
-               /* TODO IQ calibration */
+               rt2800_iq_calibrate(rt2x00dev, rf->channel);
        }
 
        rt2800_bbp_read(rt2x00dev, 4, &bbp);

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 425183570f3566d9148590c6be3ff1875719b0db..51922cc179de2724f5dfdd43d22847b0c37bc10d 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1065,8 +1065,7 @@ static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
 }
 
 /*
- *  Generic EEPROM access.
- * The EEPROM is being accessed by word index.
+ * Generic EEPROM access. The EEPROM is being accessed by word or byte index.
  */
 static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
                                       const unsigned int word)
@@ -1086,6 +1085,12 @@ static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
        rt2x00dev->eeprom[word] = cpu_to_le16(data);
 }
 
+static inline u8 rt2x00_eeprom_byte(struct rt2x00_dev *rt2x00dev,
+                                   const unsigned int byte)
+{
+       return *(((u8 *)rt2x00dev->eeprom) + byte);
+}
+
 /*
  * Chipset handlers
  */