[PATCH] S3C24XX: fix passing spi chipselect to select routine
authorBen Dooks <ben-linux@fluff.org>
Fri, 26 Jan 2007 08:56:43 +0000 (00:56 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Fri, 26 Jan 2007 21:50:57 +0000 (13:50 -0800)
It turns out that the spi chipselect was not being passed to the set_cs
routine if one was specified in the platform data.

As part of the fix, change to using a set_cs field in the controller state,
and put a default gpio routine in if the data passed does not specify it.

Also remove the //#define DEBUG

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/spi/spi_s3c24xx.c

index 8ca08713528e0724ac2d49527247a8510b0a4b9b..651379c51ae6b691bfd150d815ad5dbecbde77ba 100644 (file)
@@ -10,9 +10,6 @@
  *
 */
 
-
-//#define DEBUG
-
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -44,6 +41,9 @@ struct s3c24xx_spi {
        int                      len;
        int                      count;
 
+       int                     (*set_cs)(struct s3c2410_spi_info *spi,
+                                         int cs, int pol);
+
        /* data buffers */
        const unsigned char     *tx;
        unsigned char           *rx;
@@ -64,6 +64,11 @@ static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
        return spi_master_get_devdata(sdev->master);
 }
 
+static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
+{
+       s3c2410_gpio_setpin(spi->pin_cs, pol);
+}
+
 static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
 {
        struct s3c24xx_spi *hw = to_hw(spi);
@@ -72,10 +77,7 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
 
        switch (value) {
        case BITBANG_CS_INACTIVE:
-               if (hw->pdata->set_cs)
-                       hw->pdata->set_cs(hw->pdata, value, cspol);
-               else
-                       s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+               hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1);
                break;
 
        case BITBANG_CS_ACTIVE:
@@ -96,14 +98,9 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
                /* write new configration */
 
                writeb(spcon, hw->regs + S3C2410_SPCON);
-
-               if (hw->pdata->set_cs)
-                       hw->pdata->set_cs(hw->pdata, value, cspol);
-               else
-                       s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+               hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol);
 
                break;
-
        }
 }
 
@@ -330,9 +327,12 @@ static int s3c24xx_spi_probe(struct platform_device *pdev)
        /* setup any gpio we can */
 
        if (!hw->pdata->set_cs) {
+               hw->set_cs = s3c24xx_spi_gpiocs;
+
                s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
                s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
-       }
+       } else
+               hw->set_cs = hw->pdata->set_cs;
 
        /* register our spi controller */