Bluetooth: btmrvl: fix hung task warning dump

It's been observed that when bluetooth driver fails to
activate the firmware, below hung task warning dump is
displayed after 120 seconds.

[   36.461022] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
[   56.512128] Bluetooth: FW failed to be active in time!
[   56.517264] Bluetooth: Downloading firmware failed!
[  240.252176] INFO: task kworker/3:2:129 blocked for more than 120 seconds.
[  240.258931]       Not tainted 3.18.0 #254
[  240.262972] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.270751] kworker/3:2     D ffffffc000205760     0   129      2 0x00000000
[  240.277825] Workqueue: events request_firmware_work_func
[  240.283134] Call trace:
[  240.285581] [<ffffffc000205760>] __switch_to+0x80/0x8c
[  240.290693] [<ffffffc00088dae0>] __schedule+0x540/0x7b8
[  240.295921] [<ffffffc00088ddd0>] schedule+0x78/0x84
[  240.300764] [<ffffffc0006dfd48>] __mmc_claim_host+0xe8/0x1c8
[  240.306395] [<ffffffc0006edd6c>] sdio_claim_host+0x74/0x84
[  240.311840] [<ffffffbffc163d08>] 0xffffffbffc163d08
[  240.316685] [<ffffffbffc165104>] 0xffffffbffc165104
[  240.321524] [<ffffffbffc130cf8>] mwifiex_dnld_fw+0x98/0x110 [mwifiex]
[  240.327918] [<ffffffbffc12ee88>] mwifiex_remove_card+0x2c4/0x5fc [mwifiex]
[  240.334741] [<ffffffc000596780>] request_firmware_work_func+0x44/0x80
[  240.341127] [<ffffffc00023b934>] process_one_work+0x2ec/0x50c
[  240.346831] [<ffffffc00023c6a0>] worker_thread+0x350/0x470
[  240.352272] [<ffffffc0002419bc>] kthread+0xf0/0xfc
[  240.357019] 2 locks held by kworker/3:2/129:
[  240.361248]  #0:  ("events"){.+.+.+}, at: [<ffffffc00023b840>] process_one_work+0x1f8/0x50c
[  240.369562]  #1:  ((&fw_work->work)){+.+.+.}, at: [<ffffffc00023b840>] process_one_work+0x1f8/0x50c
[  240.378589]   task                        PC stack   pid father
[  240.384501] kworker/1:1     D ffffffc000205760     0    40      2 0x00000000
[  240.391524] Workqueue: events mtk_atomic_work
[  240.395884] Call trace:
[  240.398317] [<ffffffc000205760>] __switch_to+0x80/0x8c
[  240.403448] [<ffffffc00027279c>] lock_acquire+0x128/0x164
[  240.408821] kworker/3:2     D ffffffc000205760     0   129      2 0x00000000
[  240.415867] Workqueue: events request_firmware_work_func
[  240.421138] Call trace:
[  240.423589] [<ffffffc000205760>] __switch_to+0x80/0x8c
[  240.428688] [<ffffffc00088dae0>] __schedule+0x540/0x7b8
[  240.433886] [<ffffffc00088ddd0>] schedule+0x78/0x84
[  240.438732] [<ffffffc0006dfd48>] __mmc_claim_host+0xe8/0x1c8
[  240.444361] [<ffffffc0006edd6c>] sdio_claim_host+0x74/0x84
[  240.449801] [<ffffffbffc163d08>] 0xffffffbffc163d08
[  240.454649] [<ffffffbffc165104>] 0xffffffbffc165104
[  240.459486] [<ffffffbffc130cf8>] mwifiex_dnld_fw+0x98/0x110 [mwifiex]
[  240.465882] [<ffffffbffc12ee88>] mwifiex_remove_card+0x2c4/0x5fc [mwifiex]
[  240.472705] [<ffffffc000596780>] request_firmware_work_func+0x44/0x80
[  240.479090] [<ffffffc00023b934>] process_one_work+0x2ec/0x50c
[  240.484794] [<ffffffc00023c6a0>] worker_thread+0x350/0x470
[  240.490231] [<ffffffc0002419bc>] kthread+0xf0/0xfc

This patch adds missing sdio_release_host() call so that wlan driver
thread can claim sdio host.

Fixes: 4863e4cc31d647e1 ("Bluetooth: btmrvl: release sdio bus after firmware is up")
Signed-off-by: Chin-Ran Lo <crlo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index d3a4acdf98c9d17071cff47879e19819a73c694d..73a1c277996947dbb0664a8dde17771f04a068d8 100644 (file)
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1112,7 +1112,8 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
         */
        if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
                BT_ERR("FW failed to be active in time!");
-               return -ETIMEDOUT;
+               ret = -ETIMEDOUT;
+               goto done;
        }
 
        sdio_release_host(card->func);