ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux

This change adds DT support for GSBI6 and muxes the gpio pins
as UART lines. Also defines a alias for serial port on these lines.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
[Srinivas Kandagatla]: fix pinctrl location and rename alias correctly
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index a7c939ba88730bf7b1e7076dc9b592e9d2b5577d..4cf967f5fb3dada93e6f34cd3fb327cf2222223b 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -7,6 +7,7 @@
 
        aliases {
                serial0 = &gsbi7_serial;
+               serial1 = &gsbi6_serial;
        };
 
        soc {
@@ -115,6 +116,18 @@
                        };
                };
 
+               gsbi@16500000 {
+                       status = "ok";
+                       qcom,mode = <GSBI_PROT_I2C_UART>;
+
+                       serial@16540000 {
+                               status = "ok";
+
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&uart_pins>;
+                       };
+               };
+
                gsbi@16600000 {
                        status = "ok";
                        qcom,mode = <GSBI_PROT_I2C_UART>;

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d17c399a1060d618fe0bff973c18fa473459611f..e631b58226604fa9500ca65098a0dec9aefb3dae 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -126,6 +126,13 @@
                                        function = "gsbi3";
                                };
                        };
+
+                       uart_pins: uart_pins {
+                               mux {
+                                       pins = "gpio14", "gpio15", "gpio16", "gpio17";
+                                       function = "gsbi6";
+                               };
+                       };
                };
 
                intc: interrupt-controller@2000000 {
@@ -248,7 +255,6 @@
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ranges;
-
                        i2c3: i2c@16280000 {
                                compatible = "qcom,i2c-qup-v1.1.1";
                                reg = <0x16280000 0x1000>;
@@ -259,6 +265,28 @@
                        };
                };
 
+               gsbi6: gsbi@16500000 {
+                       status = "disabled";
+                       compatible = "qcom,gsbi-v1.0.0";
+                       cell-index = <6>;
+                       reg = <0x16500000 0x03>;
+                       clocks = <&gcc GSBI6_H_CLK>;
+                       clock-names = "iface";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       gsbi6_serial: serial@16540000 {
+                               compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+                               reg = <0x16540000 0x100>,
+                                     <0x16500000 0x03>;
+                               interrupts = <0 156 0x0>;
+                               clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+                               clock-names = "core", "iface";
+                               status = "disabled";
+                       };
+               };
+
                gsbi7: gsbi@16600000 {
                        status = "disabled";
                        compatible = "qcom,gsbi-v1.0.0";