isci: removing intel_*.h headers
authorDave Jiang <dave.jiang@intel.com>
Thu, 5 May 2011 02:01:01 +0000 (19:01 -0700)
committerDan Williams <dan.j.williams@intel.com>
Sun, 3 Jul 2011 11:04:46 +0000 (04:04 -0700)
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
18 files changed:
drivers/scsi/isci/core/intel_sas.h [deleted file]
drivers/scsi/isci/core/intel_scsi.h [deleted file]
drivers/scsi/isci/core/scic_config_parameters.h
drivers/scsi/isci/core/scic_io_request.h
drivers/scsi/isci/core/scic_phy.h
drivers/scsi/isci/core/scic_port.h
drivers/scsi/isci/core/scic_sds_phy.h
drivers/scsi/isci/core/scic_sds_port.c
drivers/scsi/isci/core/scic_sds_port.h
drivers/scsi/isci/core/scic_sds_request.c
drivers/scsi/isci/core/scic_sds_request.h
drivers/scsi/isci/core/scic_sds_smp_request.c
drivers/scsi/isci/core/scic_sds_smp_request.h
drivers/scsi/isci/core/scic_sds_ssp_request.c
drivers/scsi/isci/core/scic_sds_stp_packet_request.h
drivers/scsi/isci/remote_device.c
drivers/scsi/isci/remote_device.h
drivers/scsi/isci/sas.h

diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h
deleted file mode 100644 (file)
index 156694f..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _INTEL_SAS_H_
-#define _INTEL_SAS_H_
-
-/**
- * This file contains all of the definitions relating to structures, constants,
- *    etc. defined by the SAS specification.
- *
- *
- */
-#include <linux/kernel.h>
-#include "intel_scsi.h"
-
-/**
- * struct sci_sas_address - This structure depicts how a SAS address is
- *    represented by SCI.
- *
- *
- */
-struct sci_sas_address {
-       /**
-        * This member contains the higher 32-bits of the SAS address.
-        */
-       u32 high;
-
-       /**
-        * This member contains the lower 32-bits of the SAS address.
-        */
-       u32 low;
-
-};
-
-/**
- * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
- *    specification defined task attribute values for a command information
- *    unit.
- *
- *
- */
-enum sci_sas_task_attribute {
-       SCI_SAS_SIMPLE_ATTRIBUTE = 0,
-       SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1,
-       SCI_SAS_ORDERED_ATTRIBUTE = 2,
-       SCI_SAS_ACA_ATTRIBUTE = 4,
-};
-
-/**
- * enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS
- *    specification defined task management functions.
- *
- * This HARD_RESET function listed here is not actually defined as a task
- * management function in the industry standard.
- */
-enum sci_sas_task_mgmt_function {
-       SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK,
-       SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET,
-       SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET,
-       SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET,
-       SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET,
-       SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA,
-       SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK,
-       SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET,
-       SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION,
-       SCI_SAS_HARD_RESET = 0xFF
-};
-
-
-/**
- * enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification
- *    defined SSP frame types.
- *
- *
- */
-enum sci_sas_frame_type {
-       SCI_SAS_DATA_FRAME = 0x01,
-       SCI_SAS_XFER_RDY_FRAME = 0x05,
-       SCI_SAS_COMMAND_FRAME = 0x06,
-       SCI_SAS_RESPONSE_FRAME = 0x07,
-       SCI_SAS_TASK_FRAME = 0x16
-};
-
-#define PHY_OPERATION_NOP               0x00
-#define PHY_OPERATION_LINK_RESET        0x01
-#define PHY_OPERATION_HARD_RESET        0x02
-#define PHY_OPERATION_DISABLE           0x03
-#define PHY_OPERATION_CLEAR_ERROR_LOG   0x05
-#define PHY_OPERATION_CLEAR_AFFILIATION 0x06
-
-#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00
-#define NPLR_PHY_DISABLED     0x01
-#define NPLR_PHY_ENABLED_SPD_NEG_FAILED   0x02
-#define NPLR_PHY_ENABLED_SATA_HOLD  0x03
-#define NPLR_PHY_ENABLED_1_5G    0x08
-#define NPLR_PHY_ENABLED_3_0G    0x09
-
-/* SMP Function Result values. */
-#define SMP_RESULT_FUNCTION_ACCEPTED              0x00
-#define SMP_RESULT_UNKNOWN_FUNCTION               0x01
-#define SMP_RESULT_FUNCTION_FAILED                0x02
-#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN      0x03
-#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04
-#define SMP_RESULT_BUSY                           0x05
-#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST     0x06
-#define SMP_RESULT_PHY_DOES_NOT_EXIST             0x10
-#define SMP_RESULT_INDEX_DOES_NOT_EXIST           0x11
-#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA      0x12
-#define SMP_RESULT_UNKNOWN_PHY_OPERATION          0x13
-#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION      0x14
-#define SMP_RESULT_PHY_TEST_IN_PROGRESS           0x15
-#define SMP_RESULT_PHY_VACANT                     0x16
-
-/* Attached Device Types */
-#define SMP_NO_DEVICE_ATTACHED      0
-#define SMP_END_DEVICE_ONLY         1
-#define SMP_EDGE_EXPANDER_DEVICE    2
-#define SMP_FANOUT_EXPANDER_DEVICE  3
-
-/* Expander phy routine attribute */
-#define DIRECT_ROUTING_ATTRIBUTE        0
-#define SUBTRACTIVE_ROUTING_ATTRIBUTE   1
-#define TABLE_ROUTING_ATTRIBUTE         2
-
-#endif /* _INTEL_SAS_H_ */
-
diff --git a/drivers/scsi/isci/core/intel_scsi.h b/drivers/scsi/isci/core/intel_scsi.h
deleted file mode 100644 (file)
index 1e45d3c..0000000
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * This file defines all of the SCSI related constants, enumerations, and
- *    types.  Please note that this file does not necessarily contain an
- *    exhaustive list of all constants, commands, sub-commands, etc.
- *
- *
- */
-
-#ifndef _SCSI_H__
-#define _SCSI_H__
-
-
-/*
- * ******************************************************************************
- * * C O N S T A N T S   A N D   M A C R O S
- * ****************************************************************************** */
-
-/**
- * enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the
- *    constants to be used for SCSI task management request codes.  SAM does
- *    not specify any particular values for these codes so constants used here
- *    are the same as those specified in SAS.
- *
- *
- */
-enum scsi_task_mgmt_request_codes {
-       SCSI_TASK_REQUEST_ABORT_TASK           = 0x01,
-       SCSI_TASK_REQUEST_ABORT_TASK_SET       = 0x02,
-       SCSI_TASK_REQUEST_CLEAR_TASK_SET       = 0x04,
-       SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET   = 0x08,
-       SCSI_TASK_REQUEST_I_T_NEXUS_RESET      = 0x10,
-       SCSI_TASK_REQUEST_CLEAR_ACA            = 0x40,
-       SCSI_TASK_REQUEST_QUERY_TASK           = 0x80,
-       SCSI_TASK_REQUEST_QUERY_TASK_SET       = 0x81,
-       SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82,
-
-};
-
-/**
- * enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the
- *    SCSI task management response codes.
- *
- *
- */
-enum scsi_task_mgmt_response_codes {
-       SCSI_TASK_MGMT_FUNC_COMPLETE      = 0,
-       SCSI_INVALID_FRAME                = 2,
-       SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4,
-       SCSI_TASK_MGMT_FUNC_FAILED        = 5,
-       SCSI_TASK_MGMT_FUNC_SUCCEEDED     = 8,
-       SCSI_INVALID_LUN                  = 9
-};
-
-/**
- * enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense
- *    data responses as per SPC-3.
- *
- *
- */
-enum scsi_sense_response_code {
-       SCSI_FIXED_CURRENT_RESPONSE_CODE       = 0x70,
-       SCSI_FIXED_DEFERRED_RESPONSE_CODE      = 0x71,
-       SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE  = 0x72,
-       SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73
-
-};
-
-/*
- * This constant represents the valid bit located in byte 0 of a FIXED
- * format sense data. */
-#define SCSI_FIXED_SENSE_DATA_VALID_BIT   0x80
-
-#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18
-
-/* This value is used in the DATAPRES field of the SCSI Response IU. */
-#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02
-
-/**
- *
- *
- * SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key
- * constants
- */
-#define SCSI_SENSE_NO_SENSE        0x00
-#define SCSI_SENSE_RECOVERED_ERROR 0x01
-#define SCSI_SENSE_NOT_READY       0x02
-#define SCSI_SENSE_MEDIUM_ERROR    0x03
-#define SCSI_SENSE_HARDWARE_ERROR  0x04
-#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
-#define SCSI_SENSE_UNIT_ATTENTION  0x06
-#define SCSI_SENSE_DATA_PROTECT    0x07
-#define SCSI_SENSE_BLANK_CHECK     0x08
-#define SCSI_SENSE_VENDOR_SPECIFIC 0x09
-#define SCSI_SENSE_COPY_ABORTED    0x0A
-#define SCSI_SENSE_ABORTED_COMMAND 0x0B
-#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D
-#define SCSI_SENSE_MISCOMPARE      0x0E
-
-/**
- *
- *
- * SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI
- * protocol additional sense code constants.
- */
-#define SCSI_ASC_NO_ADDITIONAL_SENSE             0x00
-#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED   0x04
-#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS       0x04
-#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS          0x04
-#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION    0x05
-#define SCSI_ASC_UNRECOVERED_READ_ERROR          0x11
-#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE  0x20
-#define SCSI_ASC_LBA_OUT_OF_RANGE                0x21
-#define SCSI_ASC_INVALID_FIELD_IN_CDB            0x24
-#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST      0x26
-#define SCSI_ASC_WRITE_PROTECTED                 0x27
-#define SCSI_ASC_NOT_READY_TO_READY_CHANGE       0x28
-#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED      0x39
-#define SCSI_ASC_MEDIUM_NOT_PRESENT              0x3A
-#define SCSI_ASC_INTERNAL_TARGET_FAILURE         0x44
-#define SCSI_ASC_IU_CRC_ERROR_DETECTED           0x47
-#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST          0x5A
-#define SCSI_ASC_COMMAND_SEQUENCE_ERROR          0x2C
-#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED      0x53
-#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE      0x5D
-#define SCSI_ASC_POWER_STATE_CHANGE              0x5E
-#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT     0x40
-#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED  0x67
-
-/**
- *
- *
- * SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the
- * used SCSI protocol additional sense code qualifier constants.
- */
-#define SCSI_ASCQ_NO_ADDITIONAL_SENSE                    0x00
-#define SCSI_ASCQ_INVALID_FIELD_IN_CDB                   0x00
-#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST             0x00
-#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION           0x00
-#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE                0x00
-#define SCSI_ASCQ_LBA_OUT_OF_RANGE                       0x00
-#define SCSI_ASCQ_MEDIUM_NOT_PRESENT                     0x00
-#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE              0x00
-#define SCSI_ASCQ_WRITE_PROTECTED                        0x00
-#define SCSI_ASCQ_UNRECOVERED_READ_ERROR                 0x00
-#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED             0x00
-#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE         0x00
-#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST                 0x01
-#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED          0x02
-#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED                  0x03
-#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS                 0x04
-#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS              0x09
-#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE             0x10
-#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND     0x03
-#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND  0x04
-#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE             0x42
-#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY          0x43
-#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED         0x0B
-#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL    0x04
-
-
-
-/**
- *
- *
- * SCSI_STATUS_CODES These constants define all of the used SCSI status values.
- */
-#define SCSI_STATUS_GOOD            0x00
-#define SCSI_STATUS_CHECK_CONDITION 0x02
-#define SCSI_STATUS_CONDITION_MET   0x04
-#define SCSI_STATUS_BUSY            0x08
-#define SCSI_STATUS_TASKFULL        0x28
-#define SCSI_STATUS_ACA             0x30
-#define SCSI_STATUS_ABORT           0x40
-
-/**
- *
- *
- * SCSI_OPERATION_CODES These constants delineate all of the SCSI
- * command/operation codes.
- */
-#define SCSI_INQUIRY                0x12
-#define SCSI_READ_CAPACITY_10       0x25
-#define SCSI_SERVICE_ACTION_IN_16   0x9E
-#define SCSI_TEST_UNIT_READY        0x00
-#define SCSI_START_STOP_UNIT        0x1B
-#define SCSI_SYNCHRONIZE_CACHE_10   0x35
-#define SCSI_SYNCHRONIZE_CACHE_16   0x91
-#define SCSI_REQUEST_SENSE          0x03
-#define SCSI_REPORT_LUNS            0xA0
-#define SCSI_REASSIGN_BLOCKS        0x07
-#define SCSI_READ_6                 0x08
-#define SCSI_READ_10                0x28
-#define SCSI_READ_12                0xA8
-#define SCSI_READ_16                0x88
-#define SCSI_WRITE_6                0x0A
-#define SCSI_WRITE_10               0x2A
-#define SCSI_WRITE_12               0xAA
-#define SCSI_WRITE_16               0x8A
-#define SCSI_VERIFY_10              0x2F
-#define SCSI_VERIFY_12              0xAF
-#define SCSI_VERIFY_16              0x8F
-#define SCSI_SEEK_6                 0x01
-#define SCSI_SEEK_10                0x02
-#define SCSI_WRITE_VERIFY           0x2E
-#define SCSI_FORMAT_UNIT            0x04
-#define SCSI_READ_BUFFER            0x3C
-#define SCSI_WRITE_BUFFER           0x3B
-#define SCSI_SEND_DIAGNOSTIC        0x1D
-#define SCSI_RECEIVE_DIAGNOSTIC     0x1C
-#define SCSI_MODE_SENSE_6           0x1A
-#define SCSI_MODE_SENSE_10          0x5A
-#define SCSI_MODE_SELECT_6          0x15
-#define SCSI_MODE_SELECT_10         0x55
-#define SCSI_MAINTENANCE_IN         0xA3
-#define SCSI_LOG_SENSE              0x4D
-#define SCSI_LOG_SELECT             0x4C
-#define SCSI_RESERVE_6              0x16
-#define SCSI_RESERVE_10             0x56
-#define SCSI_RELEASE_6              0x17
-#define SCSI_RELEASE_10             0x57
-#define SCSI_ATA_PASSTHRU_12        0xA1
-#define SCSI_ATA_PASSTHRU_16        0x85
-#define SCSI_WRITE_LONG_10          0x3F
-#define SCSI_WRITE_LONG_16          0x9F
-#define SCSI_PERSISTENT_RESERVE_IN  0x5E
-#define SCSI_PERSISTENT_RESERVE_OUT 0x5F
-
-/**
- *
- *
- * SCSI_SERVICE_ACTION_IN_CODES Service action in operations.
- */
-#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16     0x10
-
-#define SCSI_SERVICE_ACTION_MASK 0x1f
-
-/**
- *
- *
- * SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes.
- */
-#define SCSI_REPORT_TASK_MGMT  0x0D
-#define SCSI_REPORT_OP_CODES   0x0C
-
-/**
- *
- *
- * SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode
- * Page control values.
- */
-#define SCSI_MODE_SENSE_PC_CURRENT     0x0
-#define SCSI_MODE_SENSE_PC_CHANGEABLE  0x1
-#define SCSI_MODE_SENSE_PC_DEFAULT     0x2
-#define SCSI_MODE_SENSE_PC_SAVED       0x3
-
-#define SCSI_MODE_SENSE_PC_SHIFT           0x06
-#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE   0x3F
-#define SCSI_MODE_SENSE_DBD_ENABLE         0x08
-#define SCSI_MODE_SENSE_LLBAA_ENABLE       0x10
-
-/**
- *
- *
- * SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode
- * Page codes.
- */
-#define SCSI_MODE_PAGE_READ_WRITE_ERROR           0x01
-#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT       0x02
-#define SCSI_MODE_PAGE_CACHING                    0x08
-#define SCSI_MODE_PAGE_CONTROL                    0x0A
-#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT     0x19
-#define SCSI_MODE_PAGE_POWER_CONDITION            0x1A
-#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C
-#define SCSI_MODE_PAGE_ALL_PAGES                  0x3F
-
-#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE         0xFF
-#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE          0x0
-#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1
-#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT          0x04
-#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT          0x20
-#define SCSI_MODE_PAGE_DEXCPT_ENABLE               0x08
-#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE          0x10
-#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY     0x1
-#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE        0x2
-
-#define SCSI_MODE_SENSE_6_HEADER_LENGTH              4
-#define SCSI_MODE_SENSE_10_HEADER_LENGTH             8
-#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH  8
-#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16
-
-#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08
-#define SCSI_MODE_PAGE_19_SAS_ID         0x6
-#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM  0x1
-#define SCSI_MODE_PAGE_19_SUB1_PC        0x59
-
-#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00
-
-/* Mode Select constrains related masks value */
-#define SCSI_MODE_SELECT_PF_BIT                       0x1
-#define SCSI_MODE_SELECT_PF_MASK                      0x10
-#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE          0x6
-#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK          0x0F
-#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK           0x40
-#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK       0x80
-#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK       0x40
-#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK  0x1F
-#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1
-#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST       0x84
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC    0xF1
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER        0xF0
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP          0x38
-#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO        0x47
-
-
-#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE  0x04
-#define SCSI_MOVE_FUA_BIT_ENABLE           0x08
-#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE  0x01
-#define SCSI_READ_CAPACITY_10_DATA_LENGTH  8
-#define SCSI_READ_CAPACITY_16_DATA_LENGTH  32
-
-/* Inquiry constants */
-#define SCSI_INQUIRY_EVPD_ENABLE          0x01
-#define SCSI_INQUIRY_PAGE_CODE_OFFSET     0x02
-#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00
-#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80
-#define SCSI_INQUIRY_DEVICE_ID_PAGE       0x83
-#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89
-#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE    0xB1
-#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH  0x3C
-#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24    /* 36 */
-
-#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH   0xFC     /* 252 */
-
-/** Defines the log page codes that are use in gathing Smart data
- */
-#define SCSI_LOG_PAGE_SUPPORTED_PAGES       0x00
-#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F
-#define SCSI_LOG_PAGE_SELF_TEST             0x10
-
-/**
- *
- *
- * SCSI_INQUIRY_VPD The following are constants used with vital product data
- * inquiry pages. Values are already shifted into the proper nibble location.
- */
-#define SCSI_PIV_ENABLE                 0x80
-#define SCSI_LUN_ASSOCIATION            0x00
-#define SCSI_TARGET_PORT_ASSOCIATION    0x10
-
-#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00
-#define SCSI_NAA_IDENTIFIER_TYPE        0x03
-
-#define SCSI_T10_IDENTIFIER_TYPE        0x01
-#define SCSI_BINARY_CODE_SET            0x01
-#define SCSI_ASCII_CODE_SET             0x02
-#define SCSI_FC_PROTOCOL_IDENTIFIER     0x00
-#define SCSI_SAS_PROTOCOL_IDENTIFIER    0x60
-
-#define SCSI_VERIFY_BYTCHK_ENABLED      0x02
-
-#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02
-/**
- *
- *
- * SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop
- * Unit command Power Condition codes.
- */
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID       0x0
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE            0x1
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE              0x2
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY           0x3
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL        0x7
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL   0xB
-
-#define SCSI_START_STOP_UNIT_IMMED_MASK            0x1
-#define SCSI_START_STOP_UNIT_IMMED_SHIFT           0
-
-#define SCSI_START_STOP_UNIT_START_BIT_MASK        0x1
-#define SCSI_START_STOP_UNIT_START_BIT_SHIFT       0
-
-#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK         0x2
-#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT        1
-
-#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK         0x4
-#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT        2
-
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK   0xF
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT  0
-
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK  0xF0
-#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4
-
-#define SCSI_LOG_SENSE_PC_FIELD_MASK      0xC0
-#define SCSI_LOG_SENSE_PC_FIELD_SHIFT     6
-
-#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK      0x3F
-#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT     0
-
-/**
- *
- *
- * MRIE - Method of reporting informational exceptions codes
- */
-#define NO_REPORTING_INFO_EXCEPTION_CONDITION      0x0
-#define ASYNCHRONOUS_EVENT_REPORTING               0x1
-#define ESTABLISH_UNIT_ATTENTION_CONDITION         0x2
-#define CONDITIONALLY_GENERATE_RECOVERED_ERROR     0x3
-#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR   0x4
-#define GENERATE_NO_SENSE                          0x5
-#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6
-
-#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT      0x08
-
-/* Reassign Blocks masks */
-#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT           0x02
-#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT          0x01
-
-#endif /* _SCSI_H_ */
-
index 716abfcd0c23cf8d23b6b84ad1b5bbee8e08679a..ea09d0bd2d1b00c67bf39686b2cc29f8305fff9e 100644 (file)
@@ -66,7 +66,6 @@
 
 
 #include "sci_status.h"
-#include "intel_sas.h"
 #include "sci_controller_constants.h"
 #include "probe_roms.h"
 
index 16022636fed0c4f346af31b9f0a5792a0a34a060..6ddf3801daf8798d96a55cf4f00c567fb53a1a5e 100644 (file)
@@ -63,9 +63,8 @@
  * Determine the failure situations and return values.
  */
 
-
+#include <linux/kernel.h>
 #include "sci_status.h"
-#include "intel_sas.h"
 
 struct scic_sds_request;
 struct scic_sds_remote_device;
@@ -110,8 +109,7 @@ typedef enum {
  *
  * Return the size of the SCI IO request object.
  */
-u32 scic_io_request_get_object_size(
-       void);
+u32 scic_io_request_get_object_size(void);
 
 /**
  * scic_io_request_construct() - This method is called by the SCI user to
index 451d7977bf6d369773da15f27628f9243bcc7848..1fb49f02162b4b8d5d6ee58fcfbb1ff2a00c99dc 100644 (file)
@@ -67,7 +67,6 @@
 #include <scsi/sas.h>
 #include <scsi/libsas.h>
 #include "sci_status.h"
-#include "intel_sas.h"
 
 struct scic_sds_phy;
 struct scic_sds_port;
index 4ae9b6cdf04f0beefec273ac26ce0d26aa88b896..44a8ea887151c5afca2d5ed09cd219cda54d2d15 100644 (file)
@@ -56,9 +56,9 @@
 #ifndef _SCIC_PORT_H_
 #define _SCIC_PORT_H_
 
+#include "sas.h"
 #include "sci_status.h"
 #include "scic_phy.h"
-#include "intel_sas.h"
 
 struct scic_sds_port;
 
index b0cebdc669eb8720504054853bfb30634c20ebdf..b6a0ed1045df825ecdedea787ae966b990b7c591 100644 (file)
@@ -56,7 +56,7 @@
 #ifndef _SCIC_SDS_PHY_H_
 #define _SCIC_SDS_PHY_H_
 
-#include "intel_sas.h"
+#include "sas.h"
 #include "scic_phy.h"
 #include "scu_registers.h"
 #include "sci_base_state_machine.h"
index 05bc3bff4f6f12400194d68f132bc49bb1b2b13f..0c89fc1c09f89b7b8f12954b549d7ac1c77ffee3 100644 (file)
@@ -53,8 +53,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include "sas.h"
-#include "intel_sas.h"
 #include "scic_controller.h"
 #include "scic_phy.h"
 #include "scic_port.h"
index 2253a2ced9691bf3f6eb21b95b995bf2ec3a7d2e..115cbe3129a80be52b5f45d0a10cd02111d9a326 100644 (file)
@@ -57,8 +57,8 @@
 #define _SCIC_SDS_PORT_H_
 
 #include <linux/kernel.h>
+#include "sas.h"
 #include "sci_controller_constants.h"
-#include "intel_sas.h"
 #include "scu_registers.h"
 
 #define SCIC_SDS_DUMMY_PORT   0xFF
index f34ca3d8ee33438374bed1e4d5f856f367bdacbf..85e40ce96e96604cb209d0192de95ac1a74f3899 100644 (file)
@@ -54,8 +54,6 @@
  */
 
 #include <scsi/sas.h>
-#include "sas.h"
-#include "intel_sas.h"
 #include "scic_controller.h"
 #include "scic_io_request.h"
 #include "scic_sds_controller.h"
@@ -503,7 +501,7 @@ static void scu_ssp_io_request_construct_task_context(
 
        task_context->ssp_command_iu_length =
                sizeof(struct ssp_cmd_iu) / sizeof(u32);
-       task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME;
+       task_context->type.ssp.frame_type = SSP_COMMAND;
 
        switch (dir) {
        case DMA_FROM_DEVICE:
@@ -573,7 +571,7 @@ static void scu_ssp_task_request_construct_task_context(
        task_context->priority                     = SCU_TASK_PRIORITY_HIGH;
        task_context->task_type                    = SCU_TASK_TYPE_RAW_FRAME;
        task_context->transfer_length_bytes        = 0;
-       task_context->type.ssp.frame_type          = SCI_SAS_TASK_FRAME;
+       task_context->type.ssp.frame_type          = SSP_TASK;
        task_context->ssp_command_iu_length =
                sizeof(struct ssp_task_iu) / sizeof(u32);
 }
index 11d5a3ea9da32542b9d0c93a515d3151ab337860..b83d89362909692d362a212f1d3b2eedf4a31d47 100644 (file)
@@ -66,7 +66,6 @@
 #include "scic_io_request.h"
 #include "sci_base_state_machine.h"
 #include "scu_task_context.h"
-#include "intel_sas.h"
 
 struct scic_sds_controller;
 struct scic_sds_remote_device;
index bca51a72ee86c076e69f52f11247e36473ea8834..1f8773d3b79352d5fee50f4261161858988c5c34 100644 (file)
@@ -54,8 +54,6 @@
  */
 
 #include <scsi/sas.h>
-#include "sas.h"
-#include "intel_sas.h"
 #include "sci_base_state_machine.h"
 #include "scic_controller.h"
 #include "scic_sds_controller.h"
index 8f34ffe2c236db05f0dc7fa310355643fd726082..f432b7a182cdd0d94292e38a76a931c5bec8b026 100644 (file)
@@ -55,7 +55,6 @@
 #ifndef _SCIC_SDS_SMP_REQUEST_T_
 #define _SCIC_SDS_SMP_REQUEST_T_
 
-#include "intel_sas.h"
 #include "scic_sds_request.h"
 
 
index 7183ae331d2ecbcef778c6d29e0b0ec32e58801b..18bf3874d6ac938dc4181a3a904c14696fb19e9d 100644 (file)
@@ -53,7 +53,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include "intel_sas.h"
 #include "sci_base_state_machine.h"
 #include "scic_controller.h"
 #include "scic_sds_controller.h"
index 5d45ef6c2511022e11f2bbd4c275017cdc5c5382..e94d689e51035bfd8edd322d5489b016f6d05846 100644 (file)
@@ -55,7 +55,6 @@
 #ifndef _SCIC_SDS_STP_PACKET_REQUEST_H_
 #define _SCIC_SDS_STP_PACKET_REQUEST_H_
 
-#include "intel_sas.h"
 #include "scic_sds_stp_request.h"
 
 /**
index 89cdd0a05abc12c6e20679f7be16c88aebe716f8..15c1e6c3b223682b4f0fd015cc04c75120d7070f 100644 (file)
@@ -53,8 +53,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 #include <scsi/sas.h>
-#include "intel_sas.h"
-#include "sas.h"
 #include "isci.h"
 #include "port.h"
 #include "remote_device.h"
index 18f7f9663661288261c102bd0f12a015a0aac410..c7db4998b8f9db12cd37f7dd183cb43ffc170cd6 100644 (file)
@@ -57,7 +57,6 @@
 #define _ISCI_REMOTE_DEVICE_H_
 #include <scsi/libsas.h>
 #include "sci_status.h"
-#include "intel_sas.h"
 #include "scu_remote_node_context.h"
 #include "remote_node_context.h"
 #include "port.h"
index 83eab4671958d9666aaa00620586467f79aeae88..822a8dbd19ca21c8e356d566a3961cb2ce09da3b 100644 (file)
@@ -215,4 +215,14 @@ struct smp_req {
 
 #define SMP_RESP_HDR_SZ        4
 
+/*
+ * struct sci_sas_address - This structure depicts how a SAS address is
+ *    represented by SCI.
+ * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas
+ *
+ */
+struct sci_sas_address {
+       u32 high;
+       u32 low;
+};
 #endif