serial: 8250_dw: always set baud rate in dw8250_set_termios

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu <hu1.chen@intel.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 3eb01a719d2295dbb589f8d574c669906cb2a1f4..970ec8c74a2a1d79775de247c82554d1486807a2 100644 (file)
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -235,7 +235,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
        unsigned int rate;
        int ret;
 
-       if (IS_ERR(d->clk) || !old)
+       if (IS_ERR(d->clk))
                goto out;
 
        clk_disable_unprepare(d->clk);