.amux = EM28XX_AMUX_LINE_IN,
} },
},
+ [EM2874_BOARD_PINNACLE_PCTV_80E] = {
+ .name = "Pinnacle PCTV HD Mini",
+ .vchannels = 0,
+ .tuner_type = TUNER_ABSENT,
+ .has_dvb = 1,
+ .decoder = EM28XX_NODECODER,
+#ifdef DJH_DEBUG
+ .input = { {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = TVP5150_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ } },
+#endif
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
{ USB_DEVICE(0x2304, 0x0227),
.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+ { USB_DEVICE(0x2304, 0x023f),
+ .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
{ USB_DEVICE(0x0413, 0x6023),
.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
{ USB_DEVICE(0x093b, 0xa005),
{ -1, -1, -1, -1},
};
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+ 0-5: not used
+ 6: demod reset, active low
+ 7: LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+ {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
+ {EM2874_R80_GPIO, 0x80, 0xff, 100},/*Demod reset*/
+ {EM2874_R80_GPIO, 0xc0, 0xff, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* EEPROM hash table for devices with generic USB IDs
*/
/* enables audio for that device */
em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
break;
+
+ case EM2874_BOARD_PINNACLE_PCTV_80E:
+ /* Set 400 KHz clock */
+ em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1);
+
+ dev->digital_gpio = em2874_pinnacle_80e_digital;
+ break;
}
em28xx_gpio_set(dev, dev->tun_analog_gpio);