Staging: comedi: ni_labpc.h: Fixed line lengths of some trailing comments.

Signed-off-by: Shane Warden <shane.warden@onyxneon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h
index 82596345dcf4b651c8a9056fa98e72d5266155ac..422cee58a9676e2fd9a71f9d1eec4d2d8613a4f5 100644 (file)
--- a/drivers/staging/comedi/drivers/ni_labpc.h
+++ b/drivers/staging/comedi/drivers/ni_labpc.h
@@ -38,19 +38,27 @@ struct labpc_board_struct {
        int device_id;          /*  device id for pci and pcmcia boards */
        int ai_speed;           /*  maximum input speed in nanoseconds */
        enum labpc_bustype bustype;     /*  ISA/PCI/etc. */
-       enum labpc_register_layout register_layout;     /*  1200 has extra registers compared to pc+ */
+
+       /*  1200 has extra registers compared to pc+ */
+       enum labpc_register_layout register_layout;
        int has_ao;             /*  has analog output true/false */
        const struct comedi_lrange *ai_range_table;
        const int *ai_range_code;
        const int *ai_range_is_unipolar;
-       unsigned ai_scan_up:1;  /*  board can auto scan up in ai channels, not just down */
-       unsigned memory_mapped_io:1;    /* uses memory mapped io instead of ioports */
+
+       /*  board can auto scan up in ai channels, not just down */
+       unsigned ai_scan_up:1;
+
+       /* uses memory mapped io instead of ioports */
+       unsigned memory_mapped_io:1;
 };
 
 struct labpc_private {
        struct mite_struct *mite;       /*  for mite chip on pci-1200 */
-       volatile unsigned long long count;      /* number of data points left to be taken */
-       unsigned int ao_value[NUM_AO_CHAN];     /*  software copy of analog output values */
+       /*  number of data points left to be taken */
+       volatile unsigned long long count;
+       /*  software copy of analog output values */
+       unsigned int ao_value[NUM_AO_CHAN];
        /*  software copys of bits written to command registers */
        volatile unsigned int command1_bits;
        volatile unsigned int command2_bits;
@@ -61,16 +69,34 @@ struct labpc_private {
        /*  store last read of board status registers */
        volatile unsigned int status1_bits;
        volatile unsigned int status2_bits;
-       unsigned int divisor_a0;        /* value to load into board's counter a0 (conversion pacing) for timed conversions */
-       unsigned int divisor_b0;        /* value to load into board's counter b0 (master) for timed conversions */
-       unsigned int divisor_b1;        /* value to load into board's counter b1 (scan pacing) for timed conversions */
+       /*
+        * value to load into board's counter a0 (conversion pacing) for timed
+        * conversions
+        */
+       unsigned int divisor_a0;
+       /*
+        * value to load into board's counter b0 (master) for timed conversions
+        */
+       unsigned int divisor_b0;
+       /*
+        * value to load into board's counter b1 (scan pacing) for timed
+        * conversions
+        */
+       unsigned int divisor_b1;
        unsigned int dma_chan;  /*  dma channel to use */
        u16 *dma_buffer;        /*  buffer ai will dma into */
-       unsigned int dma_transfer_size; /*  transfer size in bytes for current transfer */
-       enum transfer_type current_transfer;    /*  we are using dma/fifo-half-full/etc. */
-       unsigned int eeprom_data[EEPROM_SIZE];  /*  stores contents of board's eeprom */
-       unsigned int caldac[16];        /*  stores settings of calibration dacs */
-       /*  function pointers so we can use inb/outb or readb/writeb as appropriate */
+       /* transfer size in bytes for current transfer */
+       unsigned int dma_transfer_size;
+       /* we are using dma/fifo-half-full/etc. */
+       enum transfer_type current_transfer;
+       /* stores contents of board's eeprom */
+       unsigned int eeprom_data[EEPROM_SIZE];
+       /* stores settings of calibration dacs */
+       unsigned int caldac[16];
+       /*
+        * function pointers so we can use inb/outb or readb/writeb as
+        * appropriate
+        */
        unsigned int (*read_byte) (unsigned long address);
        void (*write_byte) (unsigned int byte, unsigned long address);
 };