staging: sm750fb: share common bits in display control registers

The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/sm750fb/ddk750_chip.c b/drivers/staging/sm750fb/ddk750_chip.c
index 2d1128fc7b5a7b15060339921f4e7ff507d67834..0031e32b8cbe45df3a3c2bb31af2d40d91588d75 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_chip.c
+++ b/drivers/staging/sm750fb/ddk750_chip.c
@@ -249,17 +249,17 @@ int ddk750_initHw(initchip_param_t *pInitParam)
 
                /* Disable Overlay, if a former application left it on */
                reg = PEEK32(VIDEO_DISPLAY_CTRL);
-               reg = FIELD_SET(reg, VIDEO_DISPLAY_CTRL, PLANE, DISABLE);
+               reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
                POKE32(VIDEO_DISPLAY_CTRL, reg);
 
                /* Disable video alpha, if a former application left it on */
                reg = PEEK32(VIDEO_ALPHA_DISPLAY_CTRL);
-               reg = FIELD_SET(reg, VIDEO_ALPHA_DISPLAY_CTRL, PLANE, DISABLE);
+               reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
                POKE32(VIDEO_ALPHA_DISPLAY_CTRL, reg);
 
                /* Disable alpha plane, if a former application left it on */
                reg = PEEK32(ALPHA_DISPLAY_CTRL);
-               reg = FIELD_SET(reg, ALPHA_DISPLAY_CTRL, PLANE, DISABLE);
+               reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
                POKE32(ALPHA_DISPLAY_CTRL, reg);
 
                /* Disable DMA Channel, if a former application left it on */

diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c
index dc7060e28e224bf3c04f69468787fae7f9262d2a..42da3cd0dcdb6fbaab122f58179708a582e2a7a3 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_display.c
+++ b/drivers/staging/sm750fb/ddk750_display.c
@@ -23,12 +23,10 @@ static void setDisplayControl(int ctrl, int disp_state)
                         * because changing at the same time does not guarantee that
                         * the plane will also enabled or disabled.
                         */
-                       reg = FIELD_SET(reg,
-                                                               PANEL_DISPLAY_CTRL, TIMING, ENABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE);
                        POKE32(PANEL_DISPLAY_CTRL, reg);
 
-                       reg = FIELD_SET(reg,
-                                                               PANEL_DISPLAY_CTRL, PLANE, ENABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE);
 
                        /* Added some masks to mask out the reserved bits.
                         * Sometimes, the reserved bits are set/reset randomly when
@@ -57,12 +55,10 @@ static void setDisplayControl(int ctrl, int disp_state)
                         * next vertical sync. Need to find out if it is necessary to
                         * wait for 1 vsync before modifying the timing enable bit.
                         * */
-                       reg = FIELD_SET(reg,
-                                                               PANEL_DISPLAY_CTRL, PLANE, DISABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
                        POKE32(PANEL_DISPLAY_CTRL, reg);
 
-                       reg = FIELD_SET(reg,
-                                                               PANEL_DISPLAY_CTRL, TIMING, DISABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE);
                        POKE32(PANEL_DISPLAY_CTRL, reg);
                }
 
@@ -74,12 +70,10 @@ static void setDisplayControl(int ctrl, int disp_state)
                        /* Timing should be enabled first before enabling the plane because changing at the
                           same time does not guarantee that the plane will also enabled or disabled.
                           */
-                       reg = FIELD_SET(reg,
-                                                               CRT_DISPLAY_CTRL, TIMING, ENABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE);
                        POKE32(CRT_DISPLAY_CTRL, reg);
 
-                       reg = FIELD_SET(reg,
-                                                               CRT_DISPLAY_CTRL, PLANE, ENABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE);
 
                        /* Added some masks to mask out the reserved bits.
                         * Sometimes, the reserved bits are set/reset randomly when
@@ -106,12 +100,10 @@ static void setDisplayControl(int ctrl, int disp_state)
                         * vertical sync. Need to find out if it is necessary to
                         * wait for 1 vsync before modifying the timing enable bit.
                         */
-                       reg = FIELD_SET(reg,
-                                                               CRT_DISPLAY_CTRL, PLANE, DISABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
                        POKE32(CRT_DISPLAY_CTRL, reg);
 
-                       reg = FIELD_SET(reg,
-                                                               CRT_DISPLAY_CTRL, TIMING, DISABLE);
+                       reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE);
                        POKE32(CRT_DISPLAY_CTRL, reg);
                }
        }
@@ -127,8 +119,9 @@ static void waitNextVerticalSync(int ctrl, int delay)
                /* Do not wait when the Primary PLL is off or display control is already off.
                   This will prevent the software to wait forever. */
                if (!(PEEK32(PANEL_PLL_CTRL) & PLL_CTRL_POWER) ||
-                       (FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, TIMING) ==
-                        PANEL_DISPLAY_CTRL_TIMING_DISABLE)) {
+                       (FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL),
+                               DISPLAY_CTRL, TIMING) ==
+                               DISPLAY_CTRL_TIMING_DISABLE)) {
                        return;
                }
 
@@ -149,8 +142,9 @@ static void waitNextVerticalSync(int ctrl, int delay)
                /* Do not wait when the Primary PLL is off or display control is already off.
                           This will prevent the software to wait forever. */
                if (!(PEEK32(CRT_PLL_CTRL) & PLL_CTRL_POWER) ||
-                       (FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, TIMING) ==
-                        CRT_DISPLAY_CTRL_TIMING_DISABLE)) {
+                       (FIELD_GET(PEEK32(CRT_DISPLAY_CTRL),
+                               DISPLAY_CTRL, TIMING) ==
+                               DISPLAY_CTRL_TIMING_DISABLE)) {
                        return;
                }
 

diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index e7fc2391c8565718bb9d77d2ea7eabc1842c04a4..f81e0532387543a965fa7994236b799e73ab9ef4 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -65,7 +65,8 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
        dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
 
        /* Set bit 14 of display controller */
-       dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
+       dispControl = FIELD_SET(dispControl, DISPLAY_CTRL, CLOCK_PHASE,
+                               ACTIVE_LOW);
 
        POKE32(CRT_DISPLAY_CTRL, dispControl);
 
@@ -101,21 +102,22 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
                | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
 
 
-               tmp = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE,
+               tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE,
                                  pModeParam->vertical_sync_polarity) |
-                                         FIELD_VALUE(0, CRT_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) |
-                                         FIELD_SET(0, CRT_DISPLAY_CTRL, TIMING, ENABLE) |
-                                         FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
+                       FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE,
+                                   pModeParam->horizontal_sync_polarity) |
+                       FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) |
+                       FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE);
 
 
                if (getChipType() == SM750LE) {
                        displayControlAdjust_SM750LE(pModeParam, tmp);
                } else {
                        reg = PEEK32(CRT_DISPLAY_CTRL)
-                                       & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
-                                       & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
-                                       & FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING)
-                                       & FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE);
+                               & FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE)
+                               & FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE)
+                               & FIELD_CLEAR(DISPLAY_CTRL, TIMING)
+                               & FIELD_CLEAR(DISPLAY_CTRL, PLANE);
 
                         POKE32(CRT_DISPLAY_CTRL, tmp | reg);
                }
@@ -141,12 +143,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
                FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
                | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
 
-               tmp = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE,
+               tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE,
                                  pModeParam->vertical_sync_polarity) |
-                            FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) |
-                            FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity) |
-                            FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE) |
-                            FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
+                       FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE,
+                                   pModeParam->horizontal_sync_polarity) |
+                       FIELD_VALUE(0, DISPLAY_CTRL, CLOCK_PHASE,
+                                     pModeParam->clock_phase_polarity) |
+                       FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) |
+                       FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE);
 
                reserved = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK,
                                     ENABLE) |
@@ -155,11 +159,11 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
                                 FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
 
                reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved)
-                       & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
-                       & FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
-                       & FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
-                       & FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
-                       & FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
+                       & FIELD_CLEAR(DISPLAY_CTRL, CLOCK_PHASE)
+                       & FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE)
+                       & FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE)
+                       & FIELD_CLEAR(DISPLAY_CTRL, TIMING)
+                       & FIELD_CLEAR(DISPLAY_CTRL, PLANE);
 
 
                /* May a hardware bug or just my test chip (not confirmed).

diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h
index d1e7fc4d50dfa94925a6b81d804bd567fa4c188e..4d66f61272079f93486624002921057bc93bc6aa 100644 (file)
--- a/drivers/staging/sm750fb/ddk750_reg.h
+++ b/drivers/staging/sm750fb/ddk750_reg.h
@@ -825,15 +825,15 @@
 #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK            15:15
 #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_DISABLE    0
 #define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_ENABLE     1
-#define PANEL_DISPLAY_CTRL_CLOCK_PHASE                14:14
-#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH    0
-#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW     1
-#define PANEL_DISPLAY_CTRL_VSYNC_PHASE                13:13
-#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH    0
-#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW     1
-#define PANEL_DISPLAY_CTRL_HSYNC_PHASE                12:12
-#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH    0
-#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW     1
+#define DISPLAY_CTRL_CLOCK_PHASE                      14:14
+#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH          0
+#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW           1
+#define DISPLAY_CTRL_VSYNC_PHASE                      13:13
+#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH          0
+#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW           1
+#define DISPLAY_CTRL_HSYNC_PHASE                      12:12
+#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH          0
+#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW           1
 #define PANEL_DISPLAY_CTRL_VSYNC                      11:11
 #define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_HIGH          0
 #define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_LOW           1
@@ -843,9 +843,9 @@
 #define PANEL_DISPLAY_CTRL_COLOR_KEY                  9:9
 #define PANEL_DISPLAY_CTRL_COLOR_KEY_DISABLE          0
 #define PANEL_DISPLAY_CTRL_COLOR_KEY_ENABLE           1
-#define PANEL_DISPLAY_CTRL_TIMING                     8:8
-#define PANEL_DISPLAY_CTRL_TIMING_DISABLE             0
-#define PANEL_DISPLAY_CTRL_TIMING_ENABLE              1
+#define DISPLAY_CTRL_TIMING                           8:8
+#define DISPLAY_CTRL_TIMING_DISABLE                   0
+#define DISPLAY_CTRL_TIMING_ENABLE                    1
 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR           7:7
 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_DOWN      0
 #define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_UP        1
@@ -858,12 +858,12 @@
 #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN             4:4
 #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_DISABLE     0
 #define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_ENABLE      1
-#define PANEL_DISPLAY_CTRL_GAMMA                      3:3
-#define PANEL_DISPLAY_CTRL_GAMMA_DISABLE              0
-#define PANEL_DISPLAY_CTRL_GAMMA_ENABLE               1
-#define PANEL_DISPLAY_CTRL_PLANE                      2:2
-#define PANEL_DISPLAY_CTRL_PLANE_DISABLE              0
-#define PANEL_DISPLAY_CTRL_PLANE_ENABLE               1
+#define DISPLAY_CTRL_GAMMA                            3:3
+#define DISPLAY_CTRL_GAMMA_DISABLE                    0
+#define DISPLAY_CTRL_GAMMA_ENABLE                     1
+#define DISPLAY_CTRL_PLANE                            2:2
+#define DISPLAY_CTRL_PLANE_DISABLE                    0
+#define DISPLAY_CTRL_PLANE_ENABLE                     1
 #define PANEL_DISPLAY_CTRL_FORMAT                     1:0
 #define PANEL_DISPLAY_CTRL_FORMAT_8                   0
 #define PANEL_DISPLAY_CTRL_FORMAT_16                  1
@@ -966,9 +966,6 @@
 #define VIDEO_DISPLAY_CTRL_GAMMA                        3:3
 #define VIDEO_DISPLAY_CTRL_GAMMA_DISABLE                0
 #define VIDEO_DISPLAY_CTRL_GAMMA_ENABLE                 1
-#define VIDEO_DISPLAY_CTRL_PLANE                        2:2
-#define VIDEO_DISPLAY_CTRL_PLANE_DISABLE                0
-#define VIDEO_DISPLAY_CTRL_PLANE_ENABLE                 1
 #define VIDEO_DISPLAY_CTRL_FORMAT                       1:0
 #define VIDEO_DISPLAY_CTRL_FORMAT_8                     0
 #define VIDEO_DISPLAY_CTRL_FORMAT_16                    1
@@ -1065,9 +1062,6 @@
 #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY             3:3
 #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE     0
 #define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE      1
-#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE                  2:2
-#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_DISABLE          0
-#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_ENABLE           1
 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT                 1:0
 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_8               0
 #define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_16              1
@@ -1258,9 +1252,6 @@
 #define ALPHA_DISPLAY_CTRL_CHROMA_KEY                 3:3
 #define ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE         0
 #define ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE          1
-#define ALPHA_DISPLAY_CTRL_PLANE                      2:2
-#define ALPHA_DISPLAY_CTRL_PLANE_DISABLE              0
-#define ALPHA_DISPLAY_CTRL_PLANE_ENABLE               1
 #define ALPHA_DISPLAY_CTRL_FORMAT                     1:0
 #define ALPHA_DISPLAY_CTRL_FORMAT_16                  1
 #define ALPHA_DISPLAY_CTRL_FORMAT_ALPHA_4_4           2
@@ -1448,28 +1439,10 @@
 #define CRT_DISPLAY_CTRL_FIFO_3                       1
 #define CRT_DISPLAY_CTRL_FIFO_7                       2
 #define CRT_DISPLAY_CTRL_FIFO_11                      3
-#define CRT_DISPLAY_CTRL_CLOCK_PHASE                  14:14
-#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH      0
-#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW       1
-#define CRT_DISPLAY_CTRL_VSYNC_PHASE                  13:13
-#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH      0
-#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW       1
-#define CRT_DISPLAY_CTRL_HSYNC_PHASE                  12:12
-#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH      0
-#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW       1
 #define CRT_DISPLAY_CTRL_BLANK                        10:10
 #define CRT_DISPLAY_CTRL_BLANK_OFF                    0
 #define CRT_DISPLAY_CTRL_BLANK_ON                     1
-#define CRT_DISPLAY_CTRL_TIMING                       8:8
-#define CRT_DISPLAY_CTRL_TIMING_DISABLE               0
-#define CRT_DISPLAY_CTRL_TIMING_ENABLE                1
 #define CRT_DISPLAY_CTRL_PIXEL                        7:4
-#define CRT_DISPLAY_CTRL_GAMMA                        3:3
-#define CRT_DISPLAY_CTRL_GAMMA_DISABLE                0
-#define CRT_DISPLAY_CTRL_GAMMA_ENABLE                 1
-#define CRT_DISPLAY_CTRL_PLANE                        2:2
-#define CRT_DISPLAY_CTRL_PLANE_DISABLE                0
-#define CRT_DISPLAY_CTRL_PLANE_ENABLE                 1
 #define CRT_DISPLAY_CTRL_FORMAT                       1:0
 #define CRT_DISPLAY_CTRL_FORMAT_8                     0
 #define CRT_DISPLAY_CTRL_FORMAT_16                    1