staging: comedi: addi_eeprom: move the eeprom offset to addi_eeprom_readw()

All the addi_eeprom_readw() calls have the offset to the start of user
data (0x100) as part of the address calculation. Create a define for this
constant and move it's addition to the address into addi_eeprom_readw().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index c77e7729621056dd4ded2fc85041dd6595065e34..9064293c51ff1d1ec068c5fed1b5f055b96ebdad 100644 (file)
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -61,7 +61,7 @@ static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
        unsigned short w_Data;
 
        w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
-               this_board->pc_EepromChip, 0x100 + (2 * w_Address));
+               this_board->pc_EepromChip, 2 * w_Address);
        data[0] = w_Data;
 
        return insn->n;

diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index 14cbafd6e6757ee2635fc291101a1c322a46cd45..3ea831954374c2127b02215cc64ac9cb904845fa 100644 (file)
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -45,6 +45,8 @@ You should also find the complete GPL in the COPYING file accompanying this sour
   +----------+-----------+------------------------------------------------+
 */
 
+#define NVRAM_USER_DATA_START  0x100
+
 #define NVCMD_BEGIN_READ       (0x7 << 5)      /*  nvRam begin read command */
 #define NVCMD_LOAD_LOW         (0x4 << 5)      /*  nvRam load low command */
 #define NVCMD_LOAD_HIGH        (0x5 << 5)      /*  nvRam load high command */
@@ -229,6 +231,9 @@ static unsigned short addi_eeprom_readw(unsigned long iobase,
 {
        unsigned short val = 0;
 
+       /* Add the offset to the start of the user data */
+       addr += NVRAM_USER_DATA_START;
+
        if (!strcmp(type, "S5920") || !strcmp(type, "S5933"))
                val = addi_eeprom_readw_nvram(iobase, addr);
 
@@ -246,17 +251,15 @@ static int i_EepromReadDigitalInputHeader(unsigned long iobase,
        unsigned short w_Temp;
 
        /*  read nbr of channels */
-       s_Header->w_Nchannel = addi_eeprom_readw(iobase, type,
-                                                0x100 + w_Address + 6);
+       s_Header->w_Nchannel = addi_eeprom_readw(iobase, type, w_Address + 6);
 
        /*  interruptible or not */
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 8);
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + 8);
        s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
 
        /* How many interruptible logic */
        s_Header->w_NinterruptLogic = addi_eeprom_readw(iobase, type,
-                                                       0x100 + w_Address + 10);
+                                                       w_Address + 10);
 
        return 0;
 }
@@ -268,7 +271,7 @@ static int i_EepromReadDigitalOutputHeader(unsigned long iobase,
 {
        /* Read Nbr channels */
        s_Header->w_Nchannel = addi_eeprom_readw(iobase, type,
-                                                0x100 + w_Address + 6);
+                                                w_Address + 6);
        return 0;
 }
 
@@ -283,14 +286,14 @@ static int i_EepromReadTimerHeader(unsigned long iobase,
 
        /* Read No of Timer */
        s_Header->w_Ntimer = addi_eeprom_readw(iobase, type,
-                                              0x100 + w_Address + 6);
+                                              w_Address + 6);
        /* Read header size */
        for (i = 0; i < s_Header->w_Ntimer; i++) {
                s_Header->s_TimerDetails[i].w_HeaderSize =
                        addi_eeprom_readw(iobase, type,
-                                         0x100 + w_Address + 8 + w_Size + 0);
+                                         w_Address + 8 + w_Size + 0);
                w_Temp = addi_eeprom_readw(iobase, type,
-                                          0x100 + w_Address + 8 + w_Size + 2);
+                                          w_Address + 8 + w_Size + 2);
 
                /* Read Resolution */
                s_Header->s_TimerDetails[i].b_Resolution =
@@ -301,7 +304,7 @@ static int i_EepromReadTimerHeader(unsigned long iobase,
                        (unsigned char) (w_Temp >> 4) & 0x3F;
 
                w_Temp = addi_eeprom_readw(iobase, type,
-                                          0x100 + w_Address + 8 + w_Size + 4);
+                                          w_Address + 8 + w_Size + 4);
 
                /* Read MinTiming */
                s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
@@ -323,12 +326,10 @@ static int i_EepromReadAnlogOutputHeader(unsigned long iobase,
        unsigned short w_Temp;
 
        /*  No of channels for 1st hard component */
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 10);
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + 10);
        s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
        /*  Resolution for 1st hard component */
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 16);
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + 16);
        s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
        return 0;
 }
@@ -340,19 +341,18 @@ static int i_EepromReadAnlogInputHeader(unsigned long iobase,
                                        struct str_AnalogInputHeader *s_Header)
 {
        unsigned short w_Temp, w_Offset;
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 10);
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + 10);
        s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
        s_Header->w_MinConvertTiming = addi_eeprom_readw(iobase, type,
-                                                        0x100 + w_Address + 16);
+                                                        w_Address + 16);
        s_Header->w_MinDelayTiming = addi_eeprom_readw(iobase, type,
-                                                      0x100 + w_Address + 30);
+                                                      w_Address + 30);
        w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 20);
+                                  w_Address + 20);
        s_Header->b_HasDma = (w_Temp >> 13) & 0x01;     /*  whether dma present or not */
 
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + 72);     /* reading Y */
+       /* reading Y */
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + 72);
        w_Temp = w_Temp & 0x00FF;
        if (w_Temp)             /* Y>0 */
        {
@@ -365,8 +365,7 @@ static int i_EepromReadAnlogInputHeader(unsigned long iobase,
        }
 
        /* read Resolution */
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + w_Address + w_Offset);
+       w_Temp = addi_eeprom_readw(iobase, type, w_Address + w_Offset);
        s_Header->b_Resolution = w_Temp & 0x001F;       /*  last 5 bits */
 
        return 0;
@@ -388,25 +387,21 @@ static int i_EepromReadMainHeader(unsigned long iobase,
        struct str_AnalogInputHeader s_AnalogInputHeader;
 
        /* Read size */
-       s_MainHeader.w_HeaderSize = addi_eeprom_readw(iobase, type,
-                                                     0x100 + 8);
+       s_MainHeader.w_HeaderSize = addi_eeprom_readw(iobase, type, 8);
 
        /* Read nbr of functionality */
-       w_Temp = addi_eeprom_readw(iobase, type,
-                                  0x100 + 10);
+       w_Temp = addi_eeprom_readw(iobase, type, 10);
        s_MainHeader.b_Nfunctions = (unsigned char) w_Temp & 0x00FF;
 
        /* Read functionality details */
        for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
                /* Read Type */
-               w_Temp = addi_eeprom_readw(iobase, type,
-                                          0x100 + 12 + w_Count);
+               w_Temp = addi_eeprom_readw(iobase, type, 12 + w_Count);
                s_MainHeader.s_Functions[i].b_Type = (unsigned char) w_Temp & 0x3F;
                w_Count = w_Count + 2;
                /* Read Address */
                s_MainHeader.s_Functions[i].w_Address =
-                       addi_eeprom_readw(iobase, type,
-                                         0x100 + 12 + w_Count);
+                       addi_eeprom_readw(iobase, type, 12 + w_Count);
                w_Count = w_Count + 2;
        }