clk: shmobile: rcar-gen2: Fix qspi divisor

The qspi clock divisor is incorrectly set to twice the value it should
have, possibly because it has been computed based on PLL1 as the clock
parent instead of PLL1 / 2 (the datasheets specifies the qspi nominal
frequencies, not the divisor values). Fix it.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c
index 8c7bcbd727df3ae6ccdf0b72bdc1ec2f23211fc1..dd272a0d144664aff0012ab109b99f41c1aa2446 100644 (file)
--- a/drivers/clk/shmobile/clk-rcar-gen2.c
+++ b/drivers/clk/shmobile/clk-rcar-gen2.c
@@ -215,7 +215,7 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
        } else if (!strcmp(name, "qspi")) {
                parent_name = "pll1_div2";
                div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
-                   ? 16 : 20;
+                   ? 8 : 10;
        } else if (!strcmp(name, "sdh")) {
                parent_name = "pll1_div2";
                table = cpg_sdh_div_table;