ASoC: tlv320dac33: Use usleep_range for delays
authorPeter Ujfalusi <peter.ujfalusi@nokia.com>
Fri, 22 Oct 2010 12:11:20 +0000 (15:11 +0300)
committerLiam Girdwood <lrg@slimlogic.co.uk>
Sat, 23 Oct 2010 13:43:08 +0000 (14:43 +0100)
Switch to use the more precise usleep_range instead of
msleep().
Replace the udelay with usleep_range to remove the busy loop
waiting.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Borwn <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
sound/soc/codecs/tlv320dac33.c

index 58349dcd1a6eec135e35ea6ef114eebb77335de3..d251ff54a2d36f8b691b4aca2073d74adb010673 100644 (file)
@@ -669,6 +669,7 @@ static int dac33_set_bias_level(struct snd_soc_codec *codec,
 static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 {
        struct snd_soc_codec *codec = dac33->codec;
+       unsigned int delay;
 
        switch (dac33->fifo_mode) {
        case DAC33_FIFO_MODE1:
@@ -684,8 +685,9 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
                dac33_write16(codec, DAC33_PREFILL_MSB,
                                DAC33_THRREG(dac33->alarm_threshold));
                /* Enable Alarm Threshold IRQ with a delay */
-               udelay(SAMPLES_TO_US(dac33->burst_rate,
-                                    dac33->alarm_threshold));
+               delay = SAMPLES_TO_US(dac33->burst_rate,
+                                    dac33->alarm_threshold) + 1000;
+               usleep_range(delay, delay + 500);
                dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
                break;
        case DAC33_FIFO_MODE7:
@@ -785,11 +787,11 @@ static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
 
 static void dac33_oscwait(struct snd_soc_codec *codec)
 {
-       int timeout = 20;
+       int timeout = 60;
        u8 reg;
 
        do {
-               msleep(1);
+               usleep_range(1000, 2000);
                dac33_read(codec, DAC33_INT_OSC_STATUS, &reg);
        } while (((reg & 0x03) != DAC33_OSCSTATUS_NORMAL) && timeout--);
        if ((reg & 0x03) != DAC33_OSCSTATUS_NORMAL)