rtlwifi: Update 8821ae new phy parameters and its parser.
authorPing-Ke Shih <pkshih@realtek.com>
Thu, 23 Feb 2017 17:19:54 +0000 (11:19 -0600)
committerKalle Valo <kvalo@codeaurora.org>
Mon, 20 Mar 2017 17:10:14 +0000 (19:10 +0200)
There are new PHY table values for the RTL8821AE. The changes require
new parsing code.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/table.h
drivers/net/wireless/realtek/rtlwifi/wifi.h

index 8da874cbec1a19353877f5cdf4855050f333bbc6..04c9c31c9663fa46cce85bc17ec05c953360d8d4 100644 (file)
@@ -660,6 +660,88 @@ void rtl8821ae_phy_switch_wirelessband(struct ieee80211_hw *hw, u8 band)
        return;
 }
 
+static bool _rtl8821ae_check_positive(struct ieee80211_hw *hw,
+                                     const u32 condition1,
+                                     const u32 condition2)
+{
+       struct rtl_priv *rtlpriv = rtl_priv(hw);
+       struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+       u32 cut_ver = ((rtlhal->version & CHIP_VER_RTL_MASK)
+                                       >> CHIP_VER_RTL_SHIFT);
+       u32 intf = (rtlhal->interface == INTF_USB ? BIT(1) : BIT(0));
+
+       u8  board_type = ((rtlhal->board_type & BIT(4)) >> 4) << 0 | /* _GLNA */
+                        ((rtlhal->board_type & BIT(3)) >> 3) << 1 | /* _GPA  */
+                        ((rtlhal->board_type & BIT(7)) >> 7) << 2 | /* _ALNA */
+                        ((rtlhal->board_type & BIT(6)) >> 6) << 3 | /* _APA  */
+                        ((rtlhal->board_type & BIT(2)) >> 2) << 4;  /* _BT   */
+
+       u32 cond1 = condition1, cond2 = condition2;
+       u32 driver1 = cut_ver << 24 |   /* CUT ver */
+                     0 << 20 |                 /* interface 2/2 */
+                     0x04 << 16 |              /* platform */
+                     rtlhal->package_type << 12 |
+                     intf << 8 |                       /* interface 1/2 */
+                     board_type;
+
+       u32 driver2 = rtlhal->type_glna <<  0 |
+                     rtlhal->type_gpa  <<  8 |
+                     rtlhal->type_alna << 16 |
+                     rtlhal->type_apa  << 24;
+
+       RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+                "===> [8812A] CheckPositive (cond1, cond2) = (0x%X 0x%X)\n",
+                cond1, cond2);
+       RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+                "===> [8812A] CheckPositive (driver1, driver2) = (0x%X 0x%X)\n",
+                driver1, driver2);
+
+       RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+                "      (Platform, Interface) = (0x%X, 0x%X)\n", 0x04, intf);
+       RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+                "      (Board, Package) = (0x%X, 0x%X)\n",
+                rtlhal->board_type, rtlhal->package_type);
+
+       /*============== Value Defined Check ===============*/
+       /*QFN Type [15:12] and Cut Version [27:24] need to do value check*/
+
+       if (((cond1 & 0x0000F000) != 0) && ((cond1 & 0x0000F000) !=
+               (driver1 & 0x0000F000)))
+               return false;
+       if (((cond1 & 0x0F000000) != 0) && ((cond1 & 0x0F000000) !=
+               (driver1 & 0x0F000000)))
+               return false;
+
+       /*=============== Bit Defined Check ================*/
+       /* We don't care [31:28] */
+
+       cond1   &= 0x00FF0FFF;
+       driver1 &= 0x00FF0FFF;
+
+       if ((cond1 & driver1) == cond1) {
+               u32 mask = 0;
+
+               if ((cond1 & 0x0F) == 0) /* BoardType is DONTCARE*/
+                       return true;
+
+               if ((cond1 & BIT(0)) != 0) /*GLNA*/
+                       mask |= 0x000000FF;
+               if ((cond1 & BIT(1)) != 0) /*GPA*/
+                       mask |= 0x0000FF00;
+               if ((cond1 & BIT(2)) != 0) /*ALNA*/
+                       mask |= 0x00FF0000;
+               if ((cond1 & BIT(3)) != 0) /*APA*/
+                       mask |= 0xFF000000;
+
+               /* BoardType of each RF path is matched*/
+               if ((cond2 & mask) == (driver2 & mask))
+                       return true;
+               else
+                       return false;
+       } else
+               return false;
+}
+
 static bool _rtl8821ae_check_condition(struct ieee80211_hw *hw,
                                       const u32 condition)
 {
@@ -1695,17 +1777,68 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
        return true;
 }
 
+static bool
+__rtl8821ae_phy_config_with_headerfile(struct ieee80211_hw *hw,
+                                      u32 *array_table, u16 arraylen,
+                                      void (*set_reg)(struct ieee80211_hw *hw,
+                                                      u32 regaddr, u32 data))
+{
+       #define COND_ELSE  2
+       #define COND_ENDIF 3
+
+       int i = 0;
+       u8 cond;
+       bool matched = true, skipped = false;
+
+       while ((i + 1) < arraylen) {
+               u32 v1 = array_table[i];
+               u32 v2 = array_table[i + 1];
+
+               if (v1 & (BIT(31) | BIT(30))) {/*positive & negative condition*/
+                       if (v1 & BIT(31)) {/* positive condition*/
+                               cond  = (u8)((v1 & (BIT(29) | BIT(28))) >> 28);
+                               if (cond == COND_ENDIF) {/*end*/
+                                       matched = true;
+                                       skipped = false;
+                               } else if (cond == COND_ELSE) /*else*/
+                                       matched = skipped ? false : true;
+                               else {/*if , else if*/
+                                       if (skipped) {
+                                               matched = false;
+                                       } else {
+                                               if (_rtl8821ae_check_positive(
+                                                               hw, v1, v2)) {
+                                                       matched = true;
+                                                       skipped = true;
+                                               } else {
+                                                       matched = false;
+                                                       skipped = false;
+                                               }
+                                       }
+                               }
+                       } else if (v1 & BIT(30)) { /*negative condition*/
+                       /*do nothing*/
+                       }
+               } else {
+                       if (matched)
+                               set_reg(hw, v1, v2);
+               }
+               i = i + 2;
+       }
+
+       return true;
+}
+
 static bool _rtl8821ae_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
 {
        struct rtl_priv *rtlpriv = rtl_priv(hw);
        struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-       u32 i, v1, v2;
        u32 arraylength;
        u32 *ptrarray;
 
        RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Read MAC_REG_Array\n");
        if (rtlhal->hw_type == HARDWARE_TYPE_RTL8821AE) {
-               arraylength = RTL8821AEMAC_1T_ARRAYLEN;
+               arraylength = RTL8821AE_MAC_1T_ARRAYLEN;
                ptrarray = RTL8821AE_MAC_REG_ARRAY;
        } else {
                arraylength = RTL8812AEMAC_1T_ARRAYLEN;
@@ -1713,37 +1846,9 @@ static bool _rtl8821ae_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
        }
        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
                 "Img: MAC_REG_ARRAY LEN %d\n", arraylength);
-       for (i = 0; i < arraylength; i += 2) {
-               v1 = ptrarray[i];
-               v2 = (u8)ptrarray[i + 1];
-               if (v1 < 0xCDCDCDCD) {
-                       rtl_write_byte(rtlpriv, v1, (u8)v2);
-                       continue;
-               } else {
-                       if (!_rtl8821ae_check_condition(hw, v1)) {
-                               /*Discard the following (offset, data) pairs*/
-                               READ_NEXT_PAIR(ptrarray, v1, v2, i);
-                               while (v2 != 0xDEAD &&
-                                      v2 != 0xCDEF &&
-                                      v2 != 0xCDCD && i < arraylength - 2) {
-                                       READ_NEXT_PAIR(ptrarray, v1, v2, i);
-                               }
-                               i -= 2; /* prevent from for-loop += 2*/
-                       } else {/*Configure matched pairs and skip to end of if-else.*/
-                               READ_NEXT_PAIR(ptrarray, v1, v2, i);
-                               while (v2 != 0xDEAD &&
-                                      v2 != 0xCDEF &&
-                                      v2 != 0xCDCD && i < arraylength - 2) {
-                                       rtl_write_byte(rtlpriv, v1, v2);
-                                       READ_NEXT_PAIR(ptrarray, v1, v2, i);
-                               }
 
-                               while (v2 != 0xDEAD && i < arraylength - 2)
-                                       READ_NEXT_PAIR(ptrarray, v1, v2, i);
-                       }
-               }
-       }
-       return true;
+       return __rtl8821ae_phy_config_with_headerfile(hw,
+                       ptrarray, arraylength, rtl_write_byte_with_val32);
 }
 
 static bool _rtl8821ae_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
@@ -1751,111 +1856,33 @@ static bool _rtl8821ae_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
 {
        struct rtl_priv *rtlpriv = rtl_priv(hw);
        struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-       int i;
        u32 *array_table;
        u16 arraylen;
-       u32 v1 = 0, v2 = 0;
 
        if (configtype == BASEBAND_CONFIG_PHY_REG) {
                if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
                        arraylen = RTL8812AEPHY_REG_1TARRAYLEN;
                        array_table = RTL8812AE_PHY_REG_ARRAY;
                } else {
-                       arraylen = RTL8821AEPHY_REG_1TARRAYLEN;
+                       arraylen = RTL8821AE_PHY_REG_1TARRAYLEN;
                        array_table = RTL8821AE_PHY_REG_ARRAY;
                }
 
-               for (i = 0; i < arraylen; i += 2) {
-                       v1 = array_table[i];
-                       v2 = array_table[i + 1];
-                       if (v1 < 0xCDCDCDCD) {
-                               _rtl8821ae_config_bb_reg(hw, v1, v2);
-                               continue;
-                       } else {/*This line is the start line of branch.*/
-                               if (!_rtl8821ae_check_condition(hw, v1)) {
-                                       /*Discard the following (offset, data) pairs*/
-                                       READ_NEXT_PAIR(array_table, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD &&
-                                              i < arraylen - 2) {
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                               v2, i);
-                                       }
-
-                                       i -= 2; /* prevent from for-loop += 2*/
-                               } else {/*Configure matched pairs and skip to end of if-else.*/
-                                       READ_NEXT_PAIR(array_table, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD &&
-                                              i < arraylen - 2) {
-                                               _rtl8821ae_config_bb_reg(hw, v1,
-                                                                        v2);
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                              v2, i);
-                                       }
-
-                                       while (v2 != 0xDEAD &&
-                                              i < arraylen - 2) {
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                              v2, i);
-                                       }
-                               }
-                       }
-               }
+               return __rtl8821ae_phy_config_with_headerfile(hw,
+                               array_table, arraylen,
+                               _rtl8821ae_config_bb_reg);
        } else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
                if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE) {
                        arraylen = RTL8812AEAGCTAB_1TARRAYLEN;
                        array_table = RTL8812AE_AGC_TAB_ARRAY;
                } else {
-                       arraylen = RTL8821AEAGCTAB_1TARRAYLEN;
+                       arraylen = RTL8821AE_AGC_TAB_1TARRAYLEN;
                        array_table = RTL8821AE_AGC_TAB_ARRAY;
                }
 
-               for (i = 0; i < arraylen; i = i + 2) {
-                       v1 = array_table[i];
-                       v2 = array_table[i+1];
-                       if (v1 < 0xCDCDCDCD) {
-                               rtl_set_bbreg(hw, v1, MASKDWORD, v2);
-                               udelay(1);
-                               continue;
-                       } else {/*This line is the start line of branch.*/
-                               if (!_rtl8821ae_check_condition(hw, v1)) {
-                                       /*Discard the following (offset, data) pairs*/
-                                       READ_NEXT_PAIR(array_table, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD &&
-                                              i < arraylen - 2) {
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                               v2, i);
-                                       }
-                                       i -= 2; /* prevent from for-loop += 2*/
-                               } else {/*Configure matched pairs and skip to end of if-else.*/
-                                       READ_NEXT_PAIR(array_table, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD &&
-                                              i < arraylen - 2) {
-                                               rtl_set_bbreg(hw, v1, MASKDWORD,
-                                                             v2);
-                                               udelay(1);
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                              v2, i);
-                                       }
-
-                                       while (v2 != 0xDEAD &&
-                                               i < arraylen - 2) {
-                                               READ_NEXT_PAIR(array_table, v1,
-                                                               v2, i);
-                                       }
-                               }
-                               RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
-                                        "The agctab_array_table[0] is %x Rtl818EEPHY_REGArray[1] is %x\n",
-                                         array_table[i],  array_table[i + 1]);
-                       }
-               }
+               return __rtl8821ae_phy_config_with_headerfile(hw,
+                               array_table, arraylen,
+                               rtl_set_bbreg_with_dwmask);
        }
        return true;
 }
@@ -1916,7 +1943,7 @@ static bool _rtl8821ae_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
                arraylen = RTL8812AEPHY_REG_ARRAY_PGLEN;
                array = RTL8812AE_PHY_REG_ARRAY_PG;
        } else {
-               arraylen = RTL8821AEPHY_REG_ARRAY_PGLEN;
+               arraylen = RTL8821AE_PHY_REG_ARRAY_PGLEN;
                array = RTL8821AE_PHY_REG_ARRAY_PG;
        }
 
@@ -1980,12 +2007,10 @@ static bool _rtl8821ae_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
 bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
                                             enum radio_path rfpath)
 {
-       int i;
        bool rtstatus = true;
        u32 *radioa_array_table_a, *radioa_array_table_b;
        u16 radioa_arraylen_a, radioa_arraylen_b;
        struct rtl_priv *rtlpriv = rtl_priv(hw);
-       u32 v1 = 0, v2 = 0;
 
        radioa_arraylen_a = RTL8812AE_RADIOA_1TARRAYLEN;
        radioa_array_table_a = RTL8812AE_RADIOA_ARRAY;
@@ -1997,69 +2022,14 @@ bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
        rtstatus = true;
        switch (rfpath) {
        case RF90_PATH_A:
-               for (i = 0; i < radioa_arraylen_a; i = i + 2) {
-                       v1 = radioa_array_table_a[i];
-                       v2 = radioa_array_table_a[i+1];
-                       if (v1 < 0xcdcdcdcd) {
-                               _rtl8821ae_config_rf_radio_a(hw, v1, v2);
-                               continue;
-                       } else{/*This line is the start line of branch.*/
-                               if (!_rtl8821ae_check_condition(hw, v1)) {
-                                       /*Discard the following (offset, data) pairs*/
-                                       READ_NEXT_PAIR(radioa_array_table_a, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD && i < radioa_arraylen_a-2)
-                                               READ_NEXT_PAIR(radioa_array_table_a, v1, v2, i);
-
-                                       i -= 2; /* prevent from for-loop += 2*/
-                               } else {/*Configure matched pairs and skip to end of if-else.*/
-                                       READ_NEXT_PAIR(radioa_array_table_a, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD && i < radioa_arraylen_a - 2) {
-                                               _rtl8821ae_config_rf_radio_a(hw, v1, v2);
-                                               READ_NEXT_PAIR(radioa_array_table_a, v1, v2, i);
-                                       }
-
-                                       while (v2 != 0xDEAD && i < radioa_arraylen_a-2)
-                                               READ_NEXT_PAIR(radioa_array_table_a, v1, v2, i);
-
-                               }
-                       }
-               }
+               return __rtl8821ae_phy_config_with_headerfile(hw,
+                               radioa_array_table_a, radioa_arraylen_a,
+                               _rtl8821ae_config_rf_radio_a);
                break;
        case RF90_PATH_B:
-               for (i = 0; i < radioa_arraylen_b; i = i + 2) {
-                       v1 = radioa_array_table_b[i];
-                       v2 = radioa_array_table_b[i+1];
-                       if (v1 < 0xcdcdcdcd) {
-                               _rtl8821ae_config_rf_radio_b(hw, v1, v2);
-                               continue;
-                       } else{/*This line is the start line of branch.*/
-                               if (!_rtl8821ae_check_condition(hw, v1)) {
-                                       /*Discard the following (offset, data) pairs*/
-                                       READ_NEXT_PAIR(radioa_array_table_b, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD && i < radioa_arraylen_b-2)
-                                               READ_NEXT_PAIR(radioa_array_table_b, v1, v2, i);
-
-                                       i -= 2; /* prevent from for-loop += 2*/
-                               } else {/*Configure matched pairs and skip to end of if-else.*/
-                                       READ_NEXT_PAIR(radioa_array_table_b, v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD && i < radioa_arraylen_b-2) {
-                                               _rtl8821ae_config_rf_radio_b(hw, v1, v2);
-                                               READ_NEXT_PAIR(radioa_array_table_b, v1, v2, i);
-                                       }
-
-                                       while (v2 != 0xDEAD && i < radioa_arraylen_b-2)
-                                               READ_NEXT_PAIR(radioa_array_table_b, v1, v2, i);
-                               }
-                       }
-               }
+               return __rtl8821ae_phy_config_with_headerfile(hw,
+                               radioa_array_table_b, radioa_arraylen_b,
+                               _rtl8821ae_config_rf_radio_b);
                break;
        case RF90_PATH_C:
        case RF90_PATH_D:
@@ -2072,21 +2042,10 @@ bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 bool rtl8821ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
                                                enum radio_path rfpath)
 {
-       #define READ_NEXT_RF_PAIR(v1, v2, i) \
-       do { \
-               i += 2; \
-               v1 = radioa_array_table[i]; \
-               v2 = radioa_array_table[i+1]; \
-       } \
-       while (0)
-
-       int i;
        bool rtstatus = true;
        u32 *radioa_array_table;
        u16 radioa_arraylen;
        struct rtl_priv *rtlpriv = rtl_priv(hw);
-       /* struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); */
-       u32 v1 = 0, v2 = 0;
 
        radioa_arraylen = RTL8821AE_RADIOA_1TARRAYLEN;
        radioa_array_table = RTL8821AE_RADIOA_ARRAY;
@@ -2096,35 +2055,9 @@ bool rtl8821ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
        rtstatus = true;
        switch (rfpath) {
        case RF90_PATH_A:
-               for (i = 0; i < radioa_arraylen; i = i + 2) {
-                       v1 = radioa_array_table[i];
-                       v2 = radioa_array_table[i+1];
-                       if (v1 < 0xcdcdcdcd)
-                               _rtl8821ae_config_rf_radio_a(hw, v1, v2);
-                       else{/*This line is the start line of branch.*/
-                               if (!_rtl8821ae_check_condition(hw, v1)) {
-                                       /*Discard the following (offset, data) pairs*/
-                                       READ_NEXT_RF_PAIR(v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                               v2 != 0xCDEF &&
-                                               v2 != 0xCDCD && i < radioa_arraylen - 2)
-                                               READ_NEXT_RF_PAIR(v1, v2, i);
-
-                                       i -= 2; /* prevent from for-loop += 2*/
-                               } else {/*Configure matched pairs and skip to end of if-else.*/
-                                       READ_NEXT_RF_PAIR(v1, v2, i);
-                                       while (v2 != 0xDEAD &&
-                                              v2 != 0xCDEF &&
-                                              v2 != 0xCDCD && i < radioa_arraylen - 2) {
-                                               _rtl8821ae_config_rf_radio_a(hw, v1, v2);
-                                               READ_NEXT_RF_PAIR(v1, v2, i);
-                                       }
-
-                                       while (v2 != 0xDEAD && i < radioa_arraylen - 2)
-                                               READ_NEXT_RF_PAIR(v1, v2, i);
-                               }
-                       }
-               }
+               return __rtl8821ae_phy_config_with_headerfile(hw,
+                       radioa_array_table, radioa_arraylen,
+                       _rtl8821ae_config_rf_radio_a);
                break;
 
        case RF90_PATH_B:
index 62a0fb76f080d6c756d73a1302eeabc891330c60..64e69e5346620d71529dad1cab6f87642c4643eb 100644 (file)
@@ -449,6 +449,9 @@ u32 RTL8821AE_PHY_REG_ARRAY[] = {
        0xCB8, 0x00508240,
 };
 
+u32 RTL8821AE_PHY_REG_1TARRAYLEN =
+       sizeof(RTL8821AE_PHY_REG_ARRAY) / sizeof(u32);
+
 u32 RTL8812AE_PHY_REG_ARRAY_PG[] = {
        0, 0, 0, 0x00000c20, 0xffffffff, 0x34363840,
        0, 0, 0, 0x00000c24, 0xffffffff, 0x42424444,
@@ -516,6 +519,9 @@ u32 RTL8821AE_PHY_REG_ARRAY_PG[] = {
        1, 0, 0, 0x00000c44, 0x0000ffff, 0x00002022
 };
 
+u32 RTL8821AE_PHY_REG_ARRAY_PGLEN =
+               sizeof(RTL8821AE_PHY_REG_ARRAY_PG) / sizeof(u32);
+
 u32 RTL8812AE_RADIOA_ARRAY[] = {
                0x000, 0x00010000,
                0x018, 0x0001712A,
@@ -2285,16 +2291,16 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
                0x0EF, 0x00000000,
                0x0EF, 0x00000100,
                0x034, 0x0000ADF3,
-               0x034, 0x00009DEF,
-               0x034, 0x00008DEC,
-               0x034, 0x00007DE9,
-               0x034, 0x00006CED,
-               0x034, 0x00005CE9,
-               0x034, 0x000044E9,
-               0x034, 0x000034E6,
-               0x034, 0x0000246A,
-               0x034, 0x00001467,
-               0x034, 0x00000068,
+               0x034, 0x00009DF0,
+               0x034, 0x00008D70,
+               0x034, 0x00007D6D,
+               0x034, 0x00006CEE,
+               0x034, 0x00005CCC,
+               0x034, 0x000044EC,
+               0x034, 0x000034AC,
+               0x034, 0x0000246D,
+               0x034, 0x0000106F,
+               0x034, 0x0000006C,
                0x0EF, 0x00000000,
                0x0ED, 0x00000010,
                0x044, 0x0000ADF2,
@@ -2365,8 +2371,11 @@ u32 RTL8821AE_RADIOA_ARRAY[] = {
                0x0FE, 0x00000000,
                0x0FE, 0x00000000,
                0x018, 0x0001712A,
+
 };
 
+u32 RTL8821AE_RADIOA_1TARRAYLEN = sizeof(RTL8821AE_RADIOA_ARRAY) / sizeof(u32);
+
 u32 RTL8812AE_MAC_REG_ARRAY[] = {
                0x010, 0x0000000C,
        0xFF0F0180, 0xABCD,
@@ -2578,6 +2587,8 @@ u32 RTL8821AE_MAC_REG_ARRAY[] = {
                0x718, 0x00000040,
 };
 
+u32 RTL8821AE_MAC_1T_ARRAYLEN = sizeof(RTL8821AE_MAC_REG_ARRAY) / sizeof(u32);
+
 u32 RTL8812AE_AGC_TAB_ARRAY[] = {
        0xFF0F07D8, 0xABCD,
                0x81C, 0xFC000001,
@@ -3430,9 +3441,11 @@ u32 RTL8821AE_AGC_TAB_ARRAY[] = {
                0x81C, 0x017E0101,
                0xC50, 0x00000022,
                0xC50, 0x00000020,
-
 };
 
+u32 RTL8821AE_AGC_TAB_1TARRAYLEN =
+       sizeof(RTL8821AE_AGC_TAB_ARRAY) / sizeof(u32);
+
 /******************************************************************************
 *                           TXPWR_LMT.TXT
 ******************************************************************************/
@@ -4284,9 +4297,9 @@ u8 *RTL8821AE_TXPWR_LMT[] = {
        "FCC", "5G", "20M", "OFDM", "1T", "100", "32",
        "ETSI", "5G", "20M", "OFDM", "1T", "100", "30",
        "MKK", "5G", "20M", "OFDM", "1T", "100", "30",
-       "FCC", "5G", "20M", "OFDM", "1T", "114", "32",
-       "ETSI", "5G", "20M", "OFDM", "1T", "114", "30",
-       "MKK", "5G", "20M", "OFDM", "1T", "114", "30",
+       "FCC", "5G", "20M", "OFDM", "1T", "104", "32",
+       "ETSI", "5G", "20M", "OFDM", "1T", "104", "30",
+       "MKK", "5G", "20M", "OFDM", "1T", "104", "30",
        "FCC", "5G", "20M", "OFDM", "1T", "108", "32",
        "ETSI", "5G", "20M", "OFDM", "1T", "108", "30",
        "MKK", "5G", "20M", "OFDM", "1T", "108", "30",
@@ -4356,9 +4369,9 @@ u8 *RTL8821AE_TXPWR_LMT[] = {
        "FCC", "5G", "20M", "HT", "1T", "100", "32",
        "ETSI", "5G", "20M", "HT", "1T", "100", "30",
        "MKK", "5G", "20M", "HT", "1T", "100", "30",
-       "FCC", "5G", "20M", "HT", "1T", "114", "32",
-       "ETSI", "5G", "20M", "HT", "1T", "114", "30",
-       "MKK", "5G", "20M", "HT", "1T", "114", "30",
+       "FCC", "5G", "20M", "HT", "1T", "104", "32",
+       "ETSI", "5G", "20M", "HT", "1T", "104", "30",
+       "MKK", "5G", "20M", "HT", "1T", "104", "30",
        "FCC", "5G", "20M", "HT", "1T", "108", "32",
        "ETSI", "5G", "20M", "HT", "1T", "108", "30",
        "MKK", "5G", "20M", "HT", "1T", "108", "30",
@@ -4428,9 +4441,9 @@ u8 *RTL8821AE_TXPWR_LMT[] = {
        "FCC", "5G", "20M", "HT", "2T", "100", "28",
        "ETSI", "5G", "20M", "HT", "2T", "100", "30",
        "MKK", "5G", "20M", "HT", "2T", "100", "30",
-       "FCC", "5G", "20M", "HT", "2T", "114", "28",
-       "ETSI", "5G", "20M", "HT", "2T", "114", "30",
-       "MKK", "5G", "20M", "HT", "2T", "114", "30",
+       "FCC", "5G", "20M", "HT", "2T", "104", "28",
+       "ETSI", "5G", "20M", "HT", "2T", "104", "30",
+       "MKK", "5G", "20M", "HT", "2T", "104", "30",
        "FCC", "5G", "20M", "HT", "2T", "108", "30",
        "ETSI", "5G", "20M", "HT", "2T", "108", "30",
        "MKK", "5G", "20M", "HT", "2T", "108", "30",
@@ -4570,3 +4583,5 @@ u8 *RTL8821AE_TXPWR_LMT[] = {
        "ETSI", "5G", "80M", "VHT", "2T", "155", "30",
        "MKK", "5G", "80M", "VHT", "2T", "155", "63"
 };
+
+u32 RTL8821AE_TXPWR_LMT_ARRAY_LEN = sizeof(RTL8821AE_TXPWR_LMT) / sizeof(u8 *);
index 24bcff6bc507bff6b27a03e939790db9d59bd5dd..192057af75dcbb469d0246b6c7020dfc953b79e7 100644 (file)
 #define __RTL8821AE_TABLE__H_
 
 #include <linux/types.h>
-#define  RTL8821AEPHY_REG_1TARRAYLEN   344
+extern u32 RTL8821AE_PHY_REG_1TARRAYLEN;
 extern u32 RTL8821AE_PHY_REG_ARRAY[];
 #define  RTL8812AEPHY_REG_1TARRAYLEN   490
 extern u32 RTL8812AE_PHY_REG_ARRAY[];
-#define RTL8821AEPHY_REG_ARRAY_PGLEN   90
+extern u32 RTL8821AE_PHY_REG_ARRAY_PGLEN;
 extern u32 RTL8821AE_PHY_REG_ARRAY_PG[];
 #define RTL8812AEPHY_REG_ARRAY_PGLEN   276
 extern u32 RTL8812AE_PHY_REG_ARRAY_PG[];
 /* #define     RTL8723BE_RADIOA_1TARRAYLEN     206 */
-/* extern u8 *RTL8821AE_TXPWR_LMT_ARRAY[]; */
 #define        RTL8812AE_RADIOA_1TARRAYLEN     1264
 extern u32 RTL8812AE_RADIOA_ARRAY[];
 #define        RTL8812AE_RADIOB_1TARRAYLEN     1240
 extern u32 RTL8812AE_RADIOB_ARRAY[];
-#define        RTL8821AE_RADIOA_1TARRAYLEN     1176
+extern u32 RTL8821AE_RADIOA_1TARRAYLEN;
 extern u32 RTL8821AE_RADIOA_ARRAY[];
-#define RTL8821AEMAC_1T_ARRAYLEN               194
+extern u32 RTL8821AE_MAC_1T_ARRAYLEN;
 extern u32 RTL8821AE_MAC_REG_ARRAY[];
 #define RTL8812AEMAC_1T_ARRAYLEN               214
 extern u32 RTL8812AE_MAC_REG_ARRAY[];
-#define RTL8821AEAGCTAB_1TARRAYLEN             382
+extern u32 RTL8821AE_AGC_TAB_1TARRAYLEN;
 extern u32 RTL8821AE_AGC_TAB_ARRAY[];
 #define RTL8812AEAGCTAB_1TARRAYLEN             1312
 extern u32 RTL8812AE_AGC_TAB_ARRAY[];
 #define RTL8812AE_TXPWR_LMT_ARRAY_LEN          3948
 extern u8 *RTL8812AE_TXPWR_LMT[];
-#define RTL8821AE_TXPWR_LMT_ARRAY_LEN          3948
+extern u32 RTL8821AE_TXPWR_LMT_ARRAY_LEN;
 extern u8 *RTL8821AE_TXPWR_LMT[];
 #endif
index 65ef42b376515dfac7de588ba5ea67504f8c6630..c0d2601bc55fbb337ea854afd4207b1e67b073eb 100644 (file)
@@ -1529,6 +1529,10 @@ struct rtl_hal {
        u8 external_lna_2g;
        u8 external_pa_5g;
        u8 external_lna_5g;
+       u8 type_glna;
+       u8 type_gpa;
+       u8 type_alna;
+       u8 type_apa;
        u8 rfe_type;
 
        /*firmware */
@@ -2933,6 +2937,14 @@ static inline void rtl_write_byte(struct rtl_priv *rtlpriv, u32 addr, u8 val8)
                rtlpriv->io.read8_sync(rtlpriv, addr);
 }
 
+static inline void rtl_write_byte_with_val32(struct ieee80211_hw *hw,
+                                            u32 addr, u32 val8)
+{
+       struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+       rtl_write_byte(rtlpriv, addr, (u8)val8);
+}
+
 static inline void rtl_write_word(struct rtl_priv *rtlpriv, u32 addr, u16 val16)
 {
        rtlpriv->io.write16_async(rtlpriv, addr, val16);
@@ -2966,6 +2978,12 @@ static inline void rtl_set_bbreg(struct ieee80211_hw *hw, u32 regaddr,
        rtlpriv->cfg->ops->set_bbreg(hw, regaddr, bitmask, data);
 }
 
+static inline void rtl_set_bbreg_with_dwmask(struct ieee80211_hw *hw,
+                                u32 regaddr, u32 data)
+{
+       rtl_set_bbreg(hw, regaddr, 0xffffffff, data);
+}
+
 static inline u32 rtl_get_rfreg(struct ieee80211_hw *hw,
                                enum radio_path rfpath, u32 regaddr,
                                u32 bitmask)