drm/i915: l3 parity sysfs interface

Dumb binary interfaces which allow root-only updates of the cache
remapping registers. As mentioned in a previous patch, software using
this interface needs to know about HW limits, and other programming
considerations as the kernel interface does no checking for these things
on the root-only interface.

v1: Drop extra posting reads (Chris)
Return negative values in the sysfs interfaces on errors (Chris)

v2: Return -EINVAL for offset % 4 (Jesse)
Move schizo userspace check out (Jesse)
Cleaner sysfs item initializers (Daniel)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
index 79f83445afa07c43d2d5109926bb4865b45b51de..c2013273a4c65deb5297ca4e492b606300c04cfb 100644 (file)
--- a/drivers/gpu/drm/i915/i915_sysfs.c
+++ b/drivers/gpu/drm/i915/i915_sysfs.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/stat.h>
 #include <linux/sysfs.h>
+#include "intel_drv.h"
 #include "i915_drv.h"
 
 static u32 calc_residency(struct drm_device *dev, const u32 reg)
@@ -92,20 +93,136 @@ static struct attribute_group rc6_attr_group = {
        .attrs =  rc6_attrs
 };
 
+static int l3_access_valid(struct drm_device *dev, loff_t offset)
+{
+       if (!IS_IVYBRIDGE(dev))
+               return -EPERM;
+
+       if (offset % 4 != 0)
+               return -EINVAL;
+
+       if (offset >= GEN7_L3LOG_SIZE)
+               return -ENXIO;
+
+       return 0;
+}
+
+static ssize_t
+i915_l3_read(struct file *filp, struct kobject *kobj,
+            struct bin_attribute *attr, char *buf,
+            loff_t offset, size_t count)
+{
+       struct device *dev = container_of(kobj, struct device, kobj);
+       struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+       struct drm_device *drm_dev = dminor->dev;
+       struct drm_i915_private *dev_priv = drm_dev->dev_private;
+       uint32_t misccpctl;
+       int i, ret;
+
+       ret = l3_access_valid(drm_dev, offset);
+       if (ret)
+               return ret;
+
+       ret = i915_mutex_lock_interruptible(drm_dev);
+       if (ret)
+               return ret;
+
+       misccpctl = I915_READ(GEN7_MISCCPCTL);
+       I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
+
+       for (i = offset; count >= 4 && i < GEN7_L3LOG_SIZE; i += 4, count -= 4)
+               *((uint32_t *)(&buf[i])) = I915_READ(GEN7_L3LOG_BASE + i);
+
+       I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+
+       mutex_unlock(&drm_dev->struct_mutex);
+
+       return i - offset;
+}
+
+static ssize_t
+i915_l3_write(struct file *filp, struct kobject *kobj,
+             struct bin_attribute *attr, char *buf,
+             loff_t offset, size_t count)
+{
+       struct device *dev = container_of(kobj, struct device, kobj);
+       struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+       struct drm_device *drm_dev = dminor->dev;
+       struct drm_i915_private *dev_priv = drm_dev->dev_private;
+       u32 *temp = NULL; /* Just here to make handling failures easy */
+       int ret;
+
+       ret = l3_access_valid(drm_dev, offset);
+       if (ret)
+               return ret;
+
+       ret = i915_mutex_lock_interruptible(drm_dev);
+       if (ret)
+               return ret;
+
+       if (!dev_priv->mm.l3_remap_info) {
+               temp = kzalloc(GEN7_L3LOG_SIZE, GFP_KERNEL);
+               if (!temp) {
+                       mutex_unlock(&drm_dev->struct_mutex);
+                       return -ENOMEM;
+               }
+       }
+
+       ret = i915_gpu_idle(drm_dev);
+       if (ret) {
+               kfree(temp);
+               mutex_unlock(&drm_dev->struct_mutex);
+               return ret;
+       }
+
+       /* TODO: Ideally we really want a GPU reset here to make sure errors
+        * aren't propagated. Since I cannot find a stable way to reset the GPU
+        * at this point it is left as a TODO.
+       */
+       if (temp)
+               dev_priv->mm.l3_remap_info = temp;
+
+       memcpy(dev_priv->mm.l3_remap_info + (offset/4),
+              buf + (offset/4),
+              count);
+
+       i915_gem_l3_remap(drm_dev);
+
+       mutex_unlock(&drm_dev->struct_mutex);
+
+       return count;
+}
+
+static struct bin_attribute dpf_attrs = {
+       .attr = {.name = "l3_parity", .mode = (S_IRUSR | S_IWUSR)},
+       .size = GEN7_L3LOG_SIZE,
+       .read = i915_l3_read,
+       .write = i915_l3_write,
+       .mmap = NULL
+};
+
 void i915_setup_sysfs(struct drm_device *dev)
 {
        int ret;
 
-       /* ILK doesn't have any residency information */
+       /* ILK and below don't yet have relevant sysfs files */
        if (INTEL_INFO(dev)->gen < 6)
                return;
 
        ret = sysfs_merge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
        if (ret)
-               DRM_ERROR("sysfs setup failed\n");
+               DRM_ERROR("RC6 residency sysfs setup failed\n");
+
+       if (!IS_IVYBRIDGE(dev))
+               return;
+
+       ret = device_create_bin_file(&dev->primary->kdev, &dpf_attrs);
+       if (ret)
+               DRM_ERROR("l3 parity sysfs setup failed\n");
 }
 
 void i915_teardown_sysfs(struct drm_device *dev)
 {
+       device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);
        sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
 }