drm/i915: extract i9xx_set_pipeconf

Prep-patch to improve the bpc handling in a next patch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 77231e31b731dddf771f7c5ccb23dc305fa7de38..7f860c6b2660f8d2f9c56f91821f90ecd2a98707 100644 (file)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4525,6 +4525,68 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
                   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
 }
 
+static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc)
+{
+       struct drm_device *dev = intel_crtc->base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       uint32_t pipeconf;
+
+       pipeconf = I915_READ(PIPECONF(intel_crtc->pipe));
+
+       if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) {
+               /* Enable pixel doubling when the dot clock is > 90% of the (display)
+                * core speed.
+                *
+                * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+                * pipe == 0 check?
+                */
+               if (intel_crtc->config.requested_mode.clock >
+                   dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+                       pipeconf |= PIPECONF_DOUBLE_WIDE;
+               else
+                       pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+       }
+
+       /* default to 8bpc */
+       pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
+       if (intel_crtc->config.has_dp_encoder) {
+               if (intel_crtc->config.dither) {
+                       pipeconf |= PIPECONF_6BPC |
+                                   PIPECONF_DITHER_EN |
+                                   PIPECONF_DITHER_TYPE_SP;
+               }
+       }
+
+       if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(&intel_crtc->base,
+                                                     INTEL_OUTPUT_EDP)) {
+               if (intel_crtc->config.dither) {
+                       pipeconf |= PIPECONF_6BPC |
+                                       PIPECONF_ENABLE |
+                                       I965_PIPECONF_ACTIVE;
+               }
+       }
+
+       if (HAS_PIPE_CXSR(dev)) {
+               if (intel_crtc->lowfreq_avail) {
+                       DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+                       pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+               } else {
+                       DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+                       pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+               }
+       }
+
+       pipeconf &= ~PIPECONF_INTERLACE_MASK;
+       if (!IS_GEN2(dev) &&
+           intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
+               pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+       else
+               pipeconf |= PIPECONF_PROGRESSIVE;
+
+       I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf);
+       POSTING_READ(PIPECONF(intel_crtc->pipe));
+}
+
 static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                              int x, int y,
                              struct drm_framebuffer *fb)
@@ -4539,7 +4601,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
        int plane = intel_crtc->plane;
        int refclk, num_connectors = 0;
        intel_clock_t clock, reduced_clock;
-       u32 dspcntr, pipeconf;
+       u32 dspcntr;
        bool ok, has_reduced_clock = false, is_sdvo = false;
        bool is_lvds = false, is_tv = false;
        struct intel_encoder *encoder;
@@ -4619,9 +4681,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                                has_reduced_clock ? &reduced_clock : NULL,
                                num_connectors);
 
-       /* setup pipeconf */
-       pipeconf = I915_READ(PIPECONF(pipe));
-
        /* Set up the display plane register */
        dspcntr = DISPPLANE_GAMMA_ENABLE;
 
@@ -4632,58 +4691,9 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                        dspcntr |= DISPPLANE_SEL_PIPE_B;
        }
 
-       if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
-               /* Enable pixel doubling when the dot clock is > 90% of the (display)
-                * core speed.
-                *
-                * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
-                * pipe == 0 check?
-                */
-               if (mode->clock >
-                   dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
-                       pipeconf |= PIPECONF_DOUBLE_WIDE;
-               else
-                       pipeconf &= ~PIPECONF_DOUBLE_WIDE;
-       }
-
-       /* default to 8bpc */
-       pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
-       if (intel_crtc->config.has_dp_encoder) {
-               if (intel_crtc->config.dither) {
-                       pipeconf |= PIPECONF_6BPC |
-                                   PIPECONF_DITHER_EN |
-                                   PIPECONF_DITHER_TYPE_SP;
-               }
-       }
-
-       if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
-               if (intel_crtc->config.dither) {
-                       pipeconf |= PIPECONF_6BPC |
-                                       PIPECONF_ENABLE |
-                                       I965_PIPECONF_ACTIVE;
-               }
-       }
-
        DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
        drm_mode_debug_printmodeline(mode);
 
-       if (HAS_PIPE_CXSR(dev)) {
-               if (intel_crtc->lowfreq_avail) {
-                       DRM_DEBUG_KMS("enabling CxSR downclocking\n");
-                       pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
-               } else {
-                       DRM_DEBUG_KMS("disabling CxSR downclocking\n");
-                       pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
-               }
-       }
-
-       pipeconf &= ~PIPECONF_INTERLACE_MASK;
-       if (!IS_GEN2(dev) &&
-           adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
-               pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
-       else
-               pipeconf |= PIPECONF_PROGRESSIVE;
-
        intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
        /* pipesrc and dspsize control the size that is scaled from,
@@ -4694,8 +4704,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
                   (mode->hdisplay - 1));
        I915_WRITE(DSPPOS(plane), 0);
 
-       I915_WRITE(PIPECONF(pipe), pipeconf);
-       POSTING_READ(PIPECONF(pipe));
+       i9xx_set_pipeconf(intel_crtc);
+
        intel_enable_pipe(dev_priv, pipe, false);
 
        intel_wait_for_vblank(dev, pipe);