ixgbe_release_rx_desc(rx_ring, i);
}
-/**
- * ixgbe_get_headlen - determine size of header for RSC/LRO/GRO/FCOE
- * @data: pointer to the start of the headers
- * @max_len: total length of section to find headers in
- *
- * This function is meant to determine the length of headers that will
- * be recognized by hardware for LRO, GRO, and RSC offloads. The main
- * motivation of doing this is to only perform one pull for IPv4 TCP
- * packets so that we can do basic things like calculating the gso_size
- * based on the average data per packet.
- **/
-static unsigned int ixgbe_get_headlen(unsigned char *data,
- unsigned int max_len)
-{
- union {
- unsigned char *network;
- /* l2 headers */
- struct ethhdr *eth;
- struct vlan_hdr *vlan;
- /* l3 headers */
- struct iphdr *ipv4;
- struct ipv6hdr *ipv6;
- } hdr;
- __be16 protocol;
- u8 nexthdr = 0; /* default to not TCP */
- u8 hlen;
-
- /* this should never happen, but better safe than sorry */
- if (max_len < ETH_HLEN)
- return max_len;
-
- /* initialize network frame pointer */
- hdr.network = data;
-
- /* set first protocol and move network header forward */
- protocol = hdr.eth->h_proto;
- hdr.network += ETH_HLEN;
-
- /* handle any vlan tag if present */
- if (protocol == htons(ETH_P_8021Q)) {
- if ((hdr.network - data) > (max_len - VLAN_HLEN))
- return max_len;
-
- protocol = hdr.vlan->h_vlan_encapsulated_proto;
- hdr.network += VLAN_HLEN;
- }
-
- /* handle L3 protocols */
- if (protocol == htons(ETH_P_IP)) {
- if ((hdr.network - data) > (max_len - sizeof(struct iphdr)))
- return max_len;
-
- /* access ihl as a u8 to avoid unaligned access on ia64 */
- hlen = (hdr.network[0] & 0x0F) << 2;
-
- /* verify hlen meets minimum size requirements */
- if (hlen < sizeof(struct iphdr))
- return hdr.network - data;
-
- /* record next protocol if header is present */
- if (!(hdr.ipv4->frag_off & htons(IP_OFFSET)))
- nexthdr = hdr.ipv4->protocol;
- } else if (protocol == htons(ETH_P_IPV6)) {
- if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
- return max_len;
-
- /* record next protocol */
- nexthdr = hdr.ipv6->nexthdr;
- hlen = sizeof(struct ipv6hdr);
-#ifdef IXGBE_FCOE
- } else if (protocol == htons(ETH_P_FCOE)) {
- if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN))
- return max_len;
- hlen = FCOE_HEADER_LEN;
-#endif
- } else {
- return hdr.network - data;
- }
-
- /* relocate pointer to start of L4 header */
- hdr.network += hlen;
-
- /* finally sort out TCP/UDP */
- if (nexthdr == IPPROTO_TCP) {
- if ((hdr.network - data) > (max_len - sizeof(struct tcphdr)))
- return max_len;
-
- /* access doff as a u8 to avoid unaligned access on ia64 */
- hlen = (hdr.network[12] & 0xF0) >> 2;
-
- /* verify hlen meets minimum size requirements */
- if (hlen < sizeof(struct tcphdr))
- return hdr.network - data;
-
- hdr.network += hlen;
- } else if (nexthdr == IPPROTO_UDP) {
- if ((hdr.network - data) > (max_len - sizeof(struct udphdr)))
- return max_len;
-
- hdr.network += sizeof(struct udphdr);
- }
-
- /*
- * If everything has gone correctly hdr.network should be the
- * data section of the packet and will be the end of the header.
- * If not then it probably represents the end of the last recognized
- * header.
- */
- if ((hdr.network - data) < max_len)
- return hdr.network - data;
- else
- return max_len;
-}
-
static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring,
struct sk_buff *skb)
{
* we need the header to contain the greater of either ETH_HLEN or
* 60 bytes if the skb->len is less than 60 for skb_pad.
*/
- pull_len = ixgbe_get_headlen(va, IXGBE_RX_HDR_SIZE);
+ pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE);
/* align pull length to size of long to optimize memcpy performance */
skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));